NEC MultiSync V801 Installation Manual
NEC Display Solutions of America, Inc.
V801 Installation Guide
80” LCD Display
Rev 1.0
www.necdisplay.com
V801
Page 1 of 8
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top, Right Side, Left Side
Page 3
Rear & Bottom
Page 4
Optional Table Top Stand Dimensions
Page 5
Optional Speaker Dimensions
Page 6
Display with Optional Wall Mount Kit
Page 7
Input
Panels
Page 8
Control Codes
Page 8
Product Description:
Type:
LCD Display
Resolution:
1920 x 1080
Dimensions without stand: 72.3” (W) x 41.8” (H) x 3.4” (D)
Aspect
Ratio:
16:9
Dimensions
with stand:
72.3”(W) x 43.3”(H) x 23.9”(D)
FCC:
Class B
Weight without stand:
132.3 lbs
Power Consumption:
230W (typ)
Weight with stand:
142.5 lbs
BTU’s:
784.79
BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation:
Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.