NEC MultiSync X431BT Installation Manual
NEC Display Solutions of America, Inc.
X431BT Installation Guide
43” LCD Display
Rev 1.1
www.necdisplay.com
X431BT Page 1 of 6
Contents
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Right Side
Page 3
Rear & Bottom
Page 4
Dimensions with Wall Mount Kit (WMK-3257)
Page 5
Input Panels
Page 5
Control Codes
Page 6
Product Description
Type:
LCD Display
Screen Surface: Anti-Reflective
Resolution:
1920 x 480
Dimensions without stand: 43.2”(W) x 11.8”(H) x 7.5”(D)
Aspect Ratio:
36:9
Weight without stand:
43.2 lbs
FCC:
Class A
Power Consumption:
105 W (typ)
BTU’s:
358.28 BTU/hour
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
Tilt Angle and Rotation
•
Below are the maximum angles that the monitor can be tilted either landscape or portrait orientation.
•
Only rotate the monitor in the clockwise direction to obtain portrait orientation.