NEC MultiSync X462UN Installation Manual
NEC Display Solutions of America, Inc.
X462UN Installation Guide
46” LCD Display
Rev 1.0
www.necdisplay.com
X462UN Page 1 of 10
Contents
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front and all Sides
Page 3
Bottom
Page 4
Optional Wall Mount Dimensions (WMK-3257)
Page 5
Quad Configuration Resolution
Page 6
Quad Dimensions with Optional Wall Mount Kit
Page 7
Optional Wall Mount Kit Dimensions (WM-46UN-2x2)
Page 8
Input Panel
Page 9
Control Codes
Page 10
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1366 x 768
Dimensions:
40.4”(W) x 22.8”(H) x 5.0”(D)
Quad Resolution:
1920 x 1080
Quad Dimensions:
80.7”(W) x 45.6”(H) x 5.0”(D)
Aspect Ratio:
16:9
Weight:
64.6 lbs
FCC:
Class B
Quad Weight:
258.4 lbs
Power Consumption:
330W (max)
BTU’s:
1127 BTU/hour
Quad Power Consumption:
1320W (max)
Quad BTU’s:
4508 BTU/hour
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg