NEC NP1150 XGA Manual - ⓭  Use The Select

1

⓭  Use the SELECT 

▼ button to select [CA 

CERTIFICATE] and press the ENTER 

button.

A  list  of  files  (thumbnail  screen)  will  be  dis-

played.

⓮  On the thumbnail screen, select a digi-

tal certificate (DER format file) saved in 

your USB memory device and press the 

ENTER button.

•  Select your root CA certificate here. 

  The selected digital certificate will be installed 

on the projector.

⓯  After completing required settings, use 

the SELECT 

▼ button to select [OK] and 

press the ENTER button.

The [WIRELESS] page will be returned.

⓰  Use the SELECT 

▼ button to select [RE-

CONNECT] and press the ENTER but-

ton.

⓱  Use the SELECT 

▼ button to select [OK] 

and press the ENTER button.

This will complete setting [EAP-TLS] for 

[EAP TYPE] in [WPA-EAP] or [WPA2-EAP].

HINT:

Clearing the digital certificate that is installed on the projector

To clear the digital certificate installed on the projector, follow the steps below.

By doing the following procedure, all the digital certificates for the currently displayed profile 

will be cleared.

❶  Select  [CLEAR  CERTIFICATES]  in  the  bot-

tom  left  of  the  [ADVANCED  SETTINGS] 

screen and press the ENTER button.

A message for confirmation will be displayed.

❷  Select [YES] and press the ENTER button.

The digital certificates will be cleared.