Portable projector np600/np500/np400/ np300/np500w np600s/np500ws user’s manual the projector’s model name indicated on the projector’s label is np600, np500, np400, np300, np500w, np600s, np500ws, np600g, np500g, np400g, np300g, np500wg, np600sg, and np500wsg respectively. All the models are referr...
2nd edition, february 2009 • ibm is a trademark or registered trademark of international business machines corporation. • macintosh, mac os x and powerbook are trademarks of apple inc. Registered in the u.S. And other countries. • microsoft, windows, windows vista, internet explorer, and powerpoint ...
Important information safety cautions precautions please read this manual carefully before using your nec np600, np500, np400, np300, np500w, np600s, and np500ws projector and keep the manual handy for future reference. Caution to turn off main power, be sure to remove the plug from power outlet. Th...
Important information warning to california residents: handling the cables supplied with this product will expose you to lead, a chemical known to the state of california to cause birth defects or other reproductive harm. Wash hands after handling. Rf interference (for usa only) warning the federal ...
Important information fire and shock precautions • ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • do not try to touch the ventilation outle...
V important information • handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire. - do not use any power cables than the supplied one. - do not bend or tug the power cable excessively. - do not place the power cable under the projector, or any heavy object...
V important information lamp replacement • to replace the lamp, follow all instructions provided on page 79 . • be sure to replace the lamp when the message [the lamp has reached the end of its usable life. Please replace the lamp.] appears. If you continue to use the lamp after the lamp has reached...
V table of contents important information ............................................................................................I 1. Introduction .......................................................................................................... 1 1 what’s in the box? .....................
V table of contents turning up or down volume ........................................................................................ 37 7 turning off the projector .............................................................................................. 38 after use..........................
Sta tu s la mp au to ad j. So ur ce se le ct me nu ex it en te r fo cu s projector lens cap (24f44681) soft case (24bs7582) 1. Introduction 1 what’s in the box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing mat...
1. Introduction introduction to the projector this section introduces you to your new projector and describes the features and controls. Congratulations on your purchase of the projector this projector is one of the very best projectors available today. The projector enables you to project precise...
1. Introduction • sx pcture preset modes for user adjustable pcture and color settngs each picture preset mode can be customized and memorized according to your preference. • preventng unauthorzed use of the projector enhanced smart security settings for keyword protection, cabinet control panel loc...
4 1. Introduction comparatve table of man features the main features vary depending on the model as follows. Standard models wide panel model short-throw model wide panel & short- throw model np600 np500 np400 np300 np500w np600s np500ws native aspect ratio ( → page 85, 87 ) standard wide standard w...
5 1. Introduction sta tu s la mp au to ad j. So ur ce se le ct me nu ex it en te r foc us part names of the projector front/top np600/np500/np400/np00/np500w zoom lever ( → page 32 ) controls ( → page 7 ) lens lens cap built-in security slot ( )* focus ring ( → page 33 ) remote sensor ( → page 10 ...
6 1. Introduction sel ect men u exit en te r sta tus lam p aut oad j. Sou rce foc us ac input connect the supplied power cable’s two-pin plug here, and plug the other end into an active wall outlet. ( → page 25 ) main power switch when you plug the supplied power cable into an active wall outlet and...
7 1. Introduction top features select menu ex it enter status lamp auto adj. Source 1 2 5 6 4 7 8 10 9 3 . (power) button ( →page 27 , 38 ) . Power indcator ( →page 26 , 38 , 82 ) . Status indcator ( →page 82 ) 4. Lamp indcator ( →page 79 , 82 ) 5. Source button ( →page 29 ) 6. Auto adj. Button ( →p...
8 1. Introduction terminal panel features 6 8 7 3 3 2 1 5 4 9 10 . Computer in/ component input connector (mn d-sub 5 pn) ( →page 17 , 20 , 22 ) . Computer (dvi-i) in connector (9 pn) (hdcp compatble) ( →page 19 , 20 ) . Audio in mn jack (stereo mn) ( →page 17 , 19 , 22 ) 4. Audio out mn jack (stere...
9 1. Introduction part names of the remote control . Infrared transmtter ( → page 10 ) . Power on button ( → page 27 ) . Power off button ( → page 38 ) 4. Magnify (+)(–) button ( → page 40 ) 5. Pic-mute button ( → page 40 ) 6. Page up/down button* ( → page 45 , 46 ) 7. Menu button ( → page 51 ) 8....
0 1. Introduction remote control precautions • handle the remote control carefully. • if the remote control gets wet, wipe it dry immediately. • avoid excessive heat and humidity. • do not heat, take apart, or throw batteries into fire. • if you will not be using the remote control for a long time, ...
2. Installation and connections sel ect me nu exit en ter sta tus lam p au toa dj. So ur ce fo cu s this section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: z set up a scree...
2. Installation and connections [np500w] the further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 28 inches (0.7 m) from the wall or screen. The largest the image can...
2. Installation and connections [np600s] the further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 60" (1.52m) measured diagonally when the projector is roughly 35 inches (0.9 m) from the wall or screen. The largest the image ca...
4 2. Installation and connections [np500ws] the further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 57" (1.45m) measured diagonally when the projector is roughly 36 inches (0.9 m) from the wall or screen. The largest the image...
5 2. Installation and connections c α b d throw distance and screen size the following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Dstance chart [np600/np500/np400/np00/np500w] b = vertical distance between lens cente...
6 2. Installation and connections [np600s] screen size b c d α diagonal width height wide wide inch mm inch mm inch mm inch mm inch mm inch mm degree 60 1524 48 1219 36 914 20 505 35 895 2 48 29.4 64 1626 51 1300 38 975 21 538 38 956 2 51 29.4 70 1778 56 1422 42 1067 23 589 41 1049 2 56 29.3 77 1956...
7 2. Installation and connections making connections note: when using with a notebook pc, be sure to connect the projector and notebook pc while the projector is in standby mode and before turning on the power to the notebook pc. In most cases the output signal from the notebook pc is not turned o...
8 2. Installation and connections • select the source name for its appropriate input connector after turning on the projector. Input connector source button on the projector cabinet button on the remote control computer 1 in computer1 (computer 1) computer 2(dvi-i)in computer 2(digital) or computer ...
9 2. Installation and connections when viewing a dvi digital signal to project a dvi digital signal, be sure to connect the pc and the projector using a dvi cable (not supplied) before turning on your pc or projector. Turn on the projector first and select computer 2 (digital) from the source menu b...
0 2. Installation and connections computer 1 in computer 2 (dvi-i) in vga signal cable (supplied) ibm pc or compatibles (notebook type) or macintosh (notebook type) ibm pc or compatibles (desktop type) or macintosh (desktop type) vga signal cable (not supplied) dvi to vga adapter (supplied) note: wh...
2. Installation and connections connecting an external monitor you can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. Note: • daisy chain connection is not possible. • when audio equipment is connected, the proj...
2. Installation and connections connecting your dvd player with component output a component signal will be automatically displayed. If not, from the menu, select [setup] → [options(1)] → [signal select] → [computer1], and then place a check mark in the component radio button. • select the source na...
2. Installation and connections 2. Installation and connections connecting your vcr • select the source name for its appropriate input connector after turning on the projector. Input connector source button on the projector cabinet button on the remote control video in video (video) s-video in s-vid...
4 2. Installation and connections connecting to a network the projector comes standard with a lan port (rj-45) which provides a lan connection using a lan cable. Using a lan cable allows you to specify the network settings and the alert mail settings for the projector over a lan. To use a lan connec...
5 2. Installation and connections connecting the supplied power cable connect the supplied power cable to the projector. First connect the supplied power cable’s two-pin plug to the ac in of the projector, and then connect the other plug of the supplied power cable in the wall outlet. Caution: do no...
6 3. Projecting an image (basic operation) this section describes how to turn on the projector and to project a picture onto the screen. 1 turning on the projector note: • the projector has two power switches: a main power switch and a (power) button (power on and off on the remote control). • when ...
7 3. Projecting an image (basic operation) 3. Press the (power) button on the projector cabinet or the power on button on the remote control for 1 second. The power indicator will turn to green and the projector will become ready to use. Tip: • when the status indicator lights orange, it means that ...
8 3. Projecting an image (basic operation) note on startup screen (menu language select screen) when you first turn on the projector, you will get the startup menu. This menu gives you the opportunity to select one of the 21 menu languages. To select a menu language, follow these steps: 1. Use the s...
9 3. Projecting an image (basic operation) volume l-click mouse r-click auto adj. Aspect help freeze picture s-video video computer 2 lamp mode 1 select menu exi t enter status lamp auto adj. Source selecting a source selecting the computer or video source note: turn on the computer or video sourc...
0 3. Projecting an image (basic operation) adjusting the picture size and position use the adjustable tilt foot, the zoom function or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the throw angle (the height of an ima...
3. Projecting an image (basic operation) sta tu s la mp au to ad j. So ur ce se le ct me nu ex it en te r fo cu s 2 1 sta tu s la mp au toa dj. So ur ce sele ct me nu ex it en te r fo cu s 3 4 adjustable tilt foot adjustable tilt foot lever adjust the tilt foot 1. Lift the front edge of the projecto...
3. Projecting an image (basic operation) sta tu s la mp au to ad j. So ur ce se le ct me nu ex it en te r fo cu s focus zoom [np600/np500/np400/np00/np500w] use the zoom lever to adjust the image size on the screen. Zoom lever [np600s/np500ws] the image size can be adjusted electronically from the m...
3. Projecting an image (basic operation) sta tu s la mp au to ad j. So ur ce se le ct me nu ex it en te r fo cu s focus 4. Use the select or button to adjust the image size. 5. After completing adjustment, press the exit button three times. The menu will be closed. Focus [np600/np500/np400/np00/...
4 3. Projecting an image (basic operation) correcting keystone distortion correcting keystone distortion if the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion note: • the keystone correction can cause an image to be s...
5 3. Projecting an image (basic operation) adjusting with the remote control 1. Press the menu button. The menu will be displayed. 2. Press the select button to select [setup] and press the enter button. The [general] screen will be displayed. 3. Press the select button to select [keystone]. 4. ...
6 3. Projecting an image (basic operation) adjusting with the auto keystone function the auto keystone correction feature will correct the vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface. Tip: even when the menu setting ...
7 3. Projecting an image (basic operation) optimizing computer signal automatically adjusting the image using auto adjust optimizing a computer image automatically. Press the auto adj. Button to optimize a computer image automatically. This adjustment may be necessary when you connect your compute...
8 3. Projecting an image (basic operation) 7 turning off the projector to turn off the projector: select menu exi t en te r status lamp auto adj. Source enter exit menu up magnify page off power on pic-mute down 1. First, press the (power) button on the projector cabinet or the power off button on t...
9 3. Projecting an image (basic operation) after use preparaton: make sure that the projector s turned off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt foot if extended. 4. Cover the lens with the lens cap. 5. Put the projector and accessories in the suppl...
40 1 turning off the image and sound press the pic-mute button to turn off the image and sound for a short period of time. Press again to restore the image and sound. Note: • even though the image is turned off, the menu still remains on the screen. • sound from the audio out jack (stereo mini) can ...
4 4. Convenient features changing lamp mode this feature enables you to select two brightness modes of the lamp: normal and eco modes. The lamp life can be extended by using the eco mode. To change to the [eco] mode, do the following: 1. Press the lamp mode button on the remote control to display ...
4 4. Convenient features preventing the unauthorized use of the projector [security] a keyword can be set for your projector using the menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the keyword input screen. Unless the correct keyword ...
4 4. Convenient features 7. Type in the same combination of select buttons and press the enter button. The confirmation screen will be displayed. 8. Select [yes] and press the enter button. The security function has been enabled. To turn on the projector when [security] s enabled: 1. Press and ...
44 4. Convenient features to dsable the security functon: 1. Press the menu button. The menu will be displayed. 2. Select [setup] → [installation] → [security] and press the enter button. The off/on menu will be displayed. 3. Select [off] and press the enter button. The keyword confirmation screen w...
45 4. Convenient features 30˚ 30˚ using the optional remote mouse receiver (np01mr) the optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connectng the...
46 4. Convenient features operatng your computer’s mouse from the remote control you can operate your computer’s mouse from the remote control. Page up/down button: scrolls the viewing area of the window or to move to the previous or next slide in power- point on your computer. Select buttons: ...
47 4. Convenient features 7 network setting by using an http browser overvew connecting the projector to a network allows the alert mail setting ( → page 49 ) and the projector control from a computer via the network. To perform the projector control from a web browser, you must have an exclusive ap...
48 4. Convenient features network settngs http:// /index.Html dhcp ..................................Enabling this option automatically assigns an ip address to the projector from your dhcp server. Disabling this option allows you to register the ip address or subnet mask number obtained from your n...
49 4. Convenient features alert mal settng http:// /lanconfig.Html this option notifies your computer of an error message via e-mail when using wired lan. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. Ho...
50 4. Convenient features using the vga signal cable to operate the projector (virtual remote) overvew the projector supports ddc/ci (display data channel command interface) that is a standard interface for bidirectional communication between display/projector and computer. The optional utility so...
5 5. Using on-screen menu 1 using the menus note: the on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the menu button on the remote control or the projector cabinet to display the menu. Note: the commands such as enter, exit, , in the bot...
5 5. Using on-screen menu menu elements slide bar solid triangle tab radio button high altitude symbol menu wndows or dalog boxes typcally have the followng elements: highlight .............................Indicates the selected menu or item. Solid triangle ......................Indicates further ...
5 5. Using on-screen menu list of menu items some menu items are not available depending on the input source. Menu item default options source computer1 * computer2(digital) * computer2(analog) * video * s-video * adjust picture preset * 1-6 detail settings general reference * high-bright, present...
54 5. Using on-screen menu setup installation orientation desktop front desktop front, ceiling rear, desktop rear, ceiling front control panel lock off off, on security off off, on communication speed 19200bps 4800bps, 9600bps, 19200bps control id control id number 1 1- 254 control id off off, on op...
55 5. Using on-screen menu menu descriptions & functions [source] computer selects the computer connected to your computer 1 in input connector. Note: • when the component input signal is connected to the computer 1 in connector, select [computer1]. • the projector will determine if the input sign...
56 5. Using on-screen menu menu descriptions & functions [adjust] [picture] [preset] this function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for various types of images. You can...
57 5. Using on-screen menu [general] storng your customzed settngs [reference] this function allows you to store your customized settings in [preset 1] to [preset 6]. First, select a base preset mode from [reference], then set [gamma correction] and [color tempera- ture]. High-bright ........ Recomm...
58 5. Using on-screen menu [reset] the settings and adjustments for [picture] will be returned to the factory settings with the exception of the following; preset numbers and [reference] within the [preset] screen. The settings and adjustments under [detail settings] within the [preset] screen that ...
59 5. Using on-screen menu adjustng horzontal/vertcal poston [horizontal/vertical] adjusts the image location horizontally and vertically. - an image can be distorted during the adjustment of [clock] and [phase]. This is not malfunction. - the adjustments for [clock], [phase], [horizontal], and [ver...
60 5. Using on-screen menu selectng aspect rato [aspect ratio] the term “aspect ratio” refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • this table shows typical resolutions and a...
6 5. Using on-screen menu sample mage when the approprate aspect rato s automatcally determned np600/np500/np400/np00/np600s [computer signal] aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10 sample image when the appro- priate aspect ratio is automati- cally determined [video signal] aspect ...
6 5. Using on-screen menu adjustng the vertcal poston of image [position] (not avalable on np500w/np500ws) (only when [16:9], [15:9], or [16:10] is selected for [aspect ratio]) when [16:9], [15:9], or [16:10] is selected in [aspect ratio], the image is displayed with black borders on the top and bot...
6 5. Using on-screen menu menu descriptions & functions [setup] [general] [np600/np500/np400/np00/np500w] [np600s/np500ws] usng dgtal zoom [digital zoom] (np600s/np500ws) this feature allows you to electronically fine adjust the image size on the screen. Use or button to large or reduce the pr...
64 5. Using on-screen menu usng the wall color correcton [wall color] this function allows for quick adaptive color correction in applications where the screen material is not white. Note: selecting [whiteboard] reduces lamp brightness. Settng lamp mode to normal or eco [lamp mode] this feature enab...
65 5. Using on-screen menu settng closed capton [closed caption] this option sets several closed caption modes that allow text to be superimposed on the projected image of video or s-video. Off ........................ This exits the closed caption mode. Caption 1-4 ......... Text is superimposed. T...
66 5. Using on-screen menu selectng interval tme for flter message [filter message] this option allows you to select the time preference between displaying the message for cleaning the filters. Clean the filter when you get the message “please clean filter.” ( →page 76 ) five options are available: ...
67 5. Using on-screen menu dsablng the cabnet buttons [control panel lock] this option turns on or off the control panel lock function. Note: • this control panel lock does not affect the remote control functions. • when the control panel is locked, pressing and holding the exit button on the projec...
68 5. Using on-screen menu settng id to the projector [control id] (avalable only when the optonal remote control np0rc s used) you can operate multiple projectors separately and independently with the single remote control that has the control id function. If you assign the same id to all the proje...
69 5. Using on-screen menu [options()] settng auto adjust [auto adjust] this feature sets the auto adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [normal] and [fine]. Off .....................
70 5. Using on-screen menu selectng sgnal format [signal select] [computer1], [computer2(analog)] allows you to choose [computer1], or [computer2(analog)] for an rgb source such as a computer, or [component] for a component video source such as a dvd player. Normally select [rgb/component] and the p...
7 5. Using on-screen menu [options()] usng off tmer [off timer] 1. Select your desired time between 30 minutes and 16 hours: off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Press the enter button on the remote control. 3. The remaining time starts counting down. 4. The projector will turn off af...
7 5. Using on-screen menu turnng on the projector by applyng computer sgnal [auto power on(comp)] when the projector is in standby mode, applying a computer signal from a computer connected to the computer1 in input will power on the projector and simultaneously project the computer’s image. This fu...
7 5. Using on-screen menu 7 menu descriptions & functions [info.] displays the status of the current signal and lamp usage. This item has four pages. The information included is as follows: tip: pressing the help button on the remote control will show the [info.] menu items. [usage time] [lamp life ...
74 5. Using on-screen menu [source] [source index] [horizontal frequency] [vertical frequency] [signal type] [video type] [sync type] [sync polarity] [scan type] [wired lan] [projector name] [mac address] [version] [product] [serial number] [firmware] version [data] version [control id] (when [contr...
75 5. Using on-screen menu menu descriptions & functions [reset] returnng to factory default [reset] the reset feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [current signal] resets the adjustments for the current signal to ...
76 6. Maintenance sel ect me nu exi t enter sta tus lam p autoa dj. Sou rce fo cu s this section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp. 1 cleaning or replacing the filters the air-filter sponge keeps dust and dirt from getting inside ...
77 6. Maintenance 3. Reinstall the new filter cover (2 locations). • insert the filter cover until you feel click. 4. Clear the filter hours used. To reset the filter usage time, from the menu, select [reset] → [clear filter hours]. ( →page 75 for resetting the filter usage time.) note: do not wash ...
78 6. Maintenance cleaning the cabinet and the lens 1. Turn off the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. Sel ect me nu exit ente r stat us lam p a...
79 6. Maintenance replacing the lamp when the lamp reaches the end of its life, the lamp indicator in the cabinet will blink red. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be sure to clear the lamp hour mete...
80 6. Maintenance 2. Remove the lamp housing. (1) loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi- tion. • the two screws are not removable. • there is an interlock on this case to prevent the risk of electrical shock. Do not attempt to c...
8 6. Maintenance 5. Connect the supplied power cable, turn on the main power switch and turn on the projector. 6. Finally, select the menu → [reset] → [clear lamp hours] to reset the lamp usage hours. Note: when you continue to use the projector for another 100 hours after the lamp has reached the e...
8 7. Appendix 1 troubleshooting this section helps you resolve problems you may encounter while setting up or using the projector. Indicator messages power indicator indcator condton projector condton note off the main power is off – blinking light green 0.5 sec on, 0.5 sec off the projector is gett...
8 7. Appendix common problems & solutions ( → “power/status/lamp indicator” on page 82 .) does not turn on or shut down will turn off no picture picture suddenly becomes dark color tone or hue is unusual image isn’t square to the screen picture is blurred flicker appears on screen image is scrolling...
84 7. Appendix if there s no pcture, or the pcture s not dsplayed correctly. • power on process for the projector and the pc. Be sure to connect the projector and notebook pc while the projector is in standby mode and before turning on the power to the notebook pc. In most cases the output signal fr...
85 7. Appendix specifications this section provides technical information about projector’s performance. Model number np600/np500/np400/np00/np500w optical np600/np500/np400/np00 np500w lcd panel np600/np500: 0.63 inch lcd with micro lens array (aspect ratio 4:3) np400/np00: 0.63 inch lcd (aspect ...
86 7. Appendix *5 an image with higher or lower resolution than the projector’s native resolution (np600/np500/np400/ np300: 1024 768 / np500w: 1280 800) will be displayed with advanced accublend. Power requirement np600/np500/np400/np00: 100–240v ac, 50/60hz np600g/np500g/np400g/np00g: 200–240v...
87 7. Appendix model number np600s/np500ws optical np600s np500ws lcd panel 0.63 inch lcd with micro lens array (aspect ratio 4:3) 0.59 inch lcd with micro lens array (aspect ratio 16:10) resolution 1024 768 pixels* 1 1280 800 pixels* 1 lens fixed zoom and manual focus digital zoom ratio= 1.2 f2...
88 7. Appendix mechanical installation orientation desktop/front, desktop/rear, ceiling/front, ceiling/rear dimensions 12.1"(w) 5.4"(h) 11.9"(d)/308 mm(w) 136 mm(h) 301 mm(d) (not including protrusions) weight 7.28 lbs/3.3kg environmental considerations operational temperatures : 41° to 104°...
89 7. Appendix select menu exi t en te r stat us lamp auto adj. Source focus 263 (10.4" ) 78 (3.1") 108.5 (4.3") 55.3 (2.2") 76 (3.0") 308 (12.1") cabinet dimensions np600/np500/np400/np00/np500w lens center lens center unit: mm (inch).
90 7. Appendix np600s/np500ws select menu exit en te r stat us lamp auto adj. Source focus 78 (3.1 ") 308 (12.1 ") 76 (3 ") 143.2 (5.6 ") 301.5 (11.9 ") 75.5 (3 ") lens center lens center unit: mm (inch).
9 7. Appendix mini d-sub 15 pin connector pin assignments of d-sub computer input connector signal level video signal : 0.7vp-p (analog) sync signal : ttl level 5 1 4 2 3 10 11 12 13 14 15 6 9 7 8 pn no. Rgb sgnal (analog) ycbcr sgnal 1 red cr 2 green or sync on green y 3 blue cb 4 ground 5 ground...
9 7. Appendix compatible input signal list horizontal: 15khz to 100khz (rgb: 24khz or over) vertical: 50hz to 120hz signal resolution (dots) frequency h. (khz) refresh rate (hz) video ntsc - * 15.7 59.9 pal - * 15.6 50.0 pal60 - * 15.7 60.0 secam - * 15.6 50.0 ibm 640 480 31.5 59.9 640 480 31.5 60...
9 7. Appendix note: contact your local dealer for a full list of the pc control codes if needed. Cable connection communication protocol baud rate .........................................19200 bps data length ......................................8 bits parity .........................................
94 7. Appendix no image is displayed from your pc or video equipment to the projector. Still no image even though you connect the projector to the pc first, then start the pc. Enabling your notebook pc’s signal output to the projector. • a combination of function keys will enable/disable the exter- ...
95 7. Appendix in the space below please describe your problem in detail. Information on application and environment where your projector is used projector model number: serial no.: date of purchase: lamp operating time (hours): lamp mode: normal eco information on input signal: horizontal synch...
96 7. Appendix travelcare guide travelcare - a service for international travelers this product is eligible for “travelcare”, nec’s unique international warranty. Please note that travelcare coverage differs in part from coverage under the warranty included with the product. Services offered with ...
97 7. Appendix nec corporation of malaysia sdn. Bhd. Address: 33rd floor, menara ta one, 22, jalan p. Ramlee, 50250 kuala lumpur, malaysia telephone: +6 03 2178 3600 (isdn) fax line: +6 03 2178 3789 email address: necare@nsm.Nec.Co.Jp web address: http://www.Necarecenter.Com (regions covered) malays...
98 7. Appendix to: nec or nec’s authorzed servce staton: fm: (company & name with signature) dear sir (s), i would like to apply your travelcare service program based on attached registration and qualification sheet and agree with your following conditions, and also the service fee will be charged t...
99 7. Appendix 5. Loan servce charges and condtons: upon acceptance of this nec projector, customer agrees to assume liability for this loan unit. The current cost of use of this loan unit is us$200 for 12 calendar days. If customer does not return the unit within the 12 calendar days, cus- tomer wi...
© nec display solutions, ltd. 2008-2009 7n951301.