NEC SOPHO 2000 IPS DM User Manual

Summary of SOPHO 2000 IPS DM

  • Page 1

    General product description sopho 2000 ips, ips dm release 12.2, august 2006 nec philips unified solutions upd 1 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Subject: sopho 2000 ip...

  • Page 2

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 2 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Liability disclaimer nec philip...

  • Page 3

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 3 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Contents: regulatory informatio...

  • Page 4

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 4 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.3.1 port interface module (pi...

  • Page 5

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 5 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 3.1.1 baseline: ..................

  • Page 6

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 6 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 4.17 mat software ................

  • Page 7

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 7 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 6.5.5.2 on-line mp-fp command o...

  • Page 8

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 8 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 7.13 l anguage support ...........

  • Page 9: Regulatory Information

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 9 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Regulatory information this pre...

  • Page 10: Service Requirements

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 10 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Service requirements in the ev...

  • Page 11: Introduction

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 11 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1 introduction 1.1 release ove...

  • Page 12: 1.2 Future

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 12 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Sopho 2000 ips release 10 the ...

  • Page 13

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 13 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. This is indicated where this i...

  • Page 14

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 14 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.3 system information sopho 2...

  • Page 15

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 15 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Sopho 2000 ips/ ips dm nodes g...

  • Page 16

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 16 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.3.1.1 peer-to-peer ip teleph...

  • Page 17

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 17 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.3.1.2 peer-to-peer ip connec...

  • Page 18

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 18 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.3.4 sopho business connect s...

  • Page 19: 1.4 Hardware Architecture

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 19 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.4 hardware architecture 1.4....

  • Page 20

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 20 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Authentication. Also, the buil...

  • Page 21

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 21 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.4.7 extended application pro...

  • Page 22: 1.5 Software Architecture

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 22 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Remote pim cannot be connected...

  • Page 23

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 23 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Isdn dch 5 to 8 expands capaci...

  • Page 24: 1.6 Technical Terms

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 24 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.6 technical terms symbol des...

  • Page 25: 1.7 Trunking Diagram

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 25 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.7 trunking diagram this figu...

  • Page 26: 1.8 Sopho Ips Dm

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 26 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.8 sopho ips dm the sopho int...

  • Page 27

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 27 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. - no mn alarm indication 1.8.2...

  • Page 28

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 28 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Note: the mp card at remote si...

  • Page 29

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 29 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 1.9 list of main benefits ca...

  • Page 30: System Configurations

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 30 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2 system configurations 2.1 mo...

  • Page 31

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 31 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. O isdn pri card o isdn bri car...

  • Page 32: 2.2 Installation Methods

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 32 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.2 installation methods the s...

  • Page 33

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 33 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.2.3 19 inch rack-mounting in...

  • Page 34

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 34 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.3.2 battery module (battmh) ...

  • Page 35: 2.4 Circuit Cards

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 35 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.3.4 sopho 2000 ips system po...

  • Page 36: 2.5 Ips System Conditions

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 36 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.5 ips system conditions the ...

  • Page 37

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 37 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.6.3 isdn station card the 2 ...

  • Page 38

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 38 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. - for the communication betwee...

  • Page 39

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 39 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. O the system detects a link do...

  • Page 40

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 40 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. The ips supports: - ddo calls ...

  • Page 41

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 41 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. The feature also provides func...

  • Page 42: 2.8 The Ip-Pad And Vct

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 42 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.8 the ip-pad and vct to supp...

  • Page 43

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 43 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Expanded channels +24ch (+16ch...

  • Page 44

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 44 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.9 fax and modem traffic 2.9....

  • Page 45: 2.10Ip Networking

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 45 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. when providing the t.30 fax ...

  • Page 46

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 46 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Remote pim over ip via nat - p...

  • Page 47: 2.13Patch Panel (24-Port)

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 47 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Mymail@net 510i is an in-switc...

  • Page 48

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 48 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.14sopho ips dm/ips dml/ips d...

  • Page 49

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 49 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.14.2 sopho ips dml/ ips dmr ...

  • Page 50

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 50 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.15remote pim over ip (releas...

  • Page 51

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 51 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Cp27 dual cpu ips pimmh yes ye...

  • Page 52

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 52 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. On-line moves, adds and change...

  • Page 53

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 53 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. If the network is short of the...

  • Page 54

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 54 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. remote site starts survival ...

  • Page 55

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 55 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Service conditions host site...

  • Page 56

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 56 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. - internal hold tone: availabl...

  • Page 57

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 57 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Green/flashing (intermittently...

  • Page 58

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 58 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 72 control 5.8 kbps 5.8 kbps 5...

  • Page 59

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 59 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 2.16language and country versi...

  • Page 60: Terminals

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 60 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 3 terminals a variety of termi...

  • Page 61: 3.1 Analogue Terminals

    General product description sopho 2000ips release 12.2, august 2006 nec philips unified solutions upd 61 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. 3.1 analogue terminals 3.1.1 b...

  • Page 62

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 62 3.1.2 analogue dterm: dtr-1 dtr-1hm single line telephone requires one analogue port. Fully modular with redial key, flash key, message waiting lamp, data jack and ring/handset receive volume. Single line hotel/motel tele...

  • Page 63

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 63 item description function buttons hook flash, redial key on dtr-1 -1; hookflash, program, redial, monitor, and hold keys on dtr- 1hm-1 color – black/silver message waiting lamp neon lamp with window design -glow through f...

  • Page 64

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 64 3.2 dterm digital terminals the dterm series digital terminals offer adjustable display and non-display units with menu-driven soft key operation, allowing users to program terminals at the desktop. Standard features incl...

  • Page 65

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 65 dtr-4d 4 line terminal – available in black (bk) only (does not support optional adapters). Fully modular with 4 flexible, 2-color led line keys, nine function keys, built-in speakerphone, 24-character by 3-line display, ...

  • Page 66

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 66 dtr-32d dcr-60 console 32-button display 60-line dss/blf console 32 line display terminal fully modular with 32 flexible, 2-color led line keys, eleven function keys, built-in speakerphone, headset jack, wall mount unit, ...

  • Page 67

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 67 standard features of the digital models large message waiting led 24 character, 3 line lcd on display equipped models tilt lcd unit adjustable base built-in wall mount unit built-in headset jack connector note...

  • Page 68

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 68 dterm series digital terminal options adapter code description ct(a)-r connects the dterm digital terminals (except the dtr-2dt) to a pc providing a complete turnkey package with graphical telephone user interface and cal...

  • Page 69: 3.3 Dterm Ip Terminals

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 69 3.3 dterm ip terminals dtermip terminals are designed to provide ergonomic form and user-friendly functions. Dtermip terminals offer an adjustable lcd display unit with menu-driven soft key operation, allowing users to pr...

  • Page 70

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 70 this feature provides the method to download the latest firmware program of ip enabled dterm from the ftp/tftp server automatically via system programming. Program download can be activated by: appointed time time of ...

  • Page 71

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 71 itr-8d itr-16d 8-button display 16-button display 8 line/feature access/ programmable feature access keys 11 dedicated function keys: feature, recall, conference, redial, hold, transfer, answer, speaker, microphone, direc...

  • Page 72

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 72 dtermip terminal features display features liquid crystal display (lcd) all models: 3 lines by 24 characters brightness control lcd contrast all models: yes adjustable lcd display dterm 4d, 8d, 16d, 16ld, 32d models only ...

  • Page 73

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 73 equipment specification size (w x d x h) dtermip 4d tilt up: 7.57" x 8.69" x 5.57" tilt down: 7.57" x 8.69" x 3.80" (without stand unit) weight: 1.98lbs dtermip 8d tilt up: 9.09" x 8.54" x 5.28" tilt down: 9.09" x 8.54" x...

  • Page 74: 3.4 Dterm Softphone Sp30

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 74 3.4 dterm softphone sp30 the dterm softphone sp30 receives and places high quality voice calls over a voip network on the user’s pc via a usb-connected headset. Call control is with a graphical user interface (gui) that u...

  • Page 75

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 75 task mode the softphone can be minimized and shown as a task within a microsoft operating system. While operating in this mode, the softphone will output an audio notification to the user upon receiving an incoming call. ...

  • Page 76

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 76 gui. The presence/status information is provided by the openworx servers (lsi) package. 8/6 party conference control: when the trunk conferencing card is configured within the voice switch and the voice trunk channel is...

  • Page 77

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 77 last number redial: a sp30 user can do a quick access and call to the most recent call placed by the sp30. During the idle stage a user can redial the telephone numbers previously dialed by selecting the [redial] in pop...

  • Page 78

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 78 - all messages sent and received are saved automatically in the chat log - automatic pop up notification when a chat message is received - icon notification within the chat log identifying different states of the messages...

  • Page 79: 3.5 Inaset

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 79 3.5 inaset tm (usa only) note: the inaset is not rohs compliant and is not available in eec countries. Inaset terminals have a web browser with a large color display and a built-in multi- port ethernet switch for connecti...

  • Page 80: 3.6 Wireless Terminals

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 80 3.6 wireless terminals the sopho 2000 ips provides a unique feature with dect terminals. The radio stations are connected via the lan. The protocol that is used to carry feature information to and from the 2000 ips is bas...

  • Page 81: 3.7 Attendant Console

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 81 3.7 attendant console 3.7.1 dterm digital 32d the dterm digital 32d is especially suitable for operator functions. Along with 16 programmable keys (each with a two-colour led) and 16 quickselection keys, it offers hands-f...

  • Page 82

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 82 the desk console is designed ergonomically, with user line keys on the left, the keyboard in the centre and frequently used function keys on the right. With this arrangement, the switchboard operator can answer or switch ...

  • Page 83

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 83 operator (e.G. For conferring in private) and a start key for initiating an outside call requested by an extension. connection via handset or headset, depending on the operator’s choice. Dimensions: 10” wide x 9” deep x...

  • Page 84

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 84 3.7.4 supervisor 60e the sv60e is an advanced windows based workstation operator console, with multitasking capabilities to enable your telephone operator to combine call handling with other office applications. The softw...

  • Page 85

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 85 other information available in the operator screen: - external or internal call, rerouted - presence status - time caller has been waiting before the call was answered call handling features full or pop-up screens provi...

  • Page 86

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 86 client platform processor 1 ghz memory 256 mb ram operating windows xp system professional, windows 2000 professional/server, windows 2003 server web browser ie 6.0 or higher.

  • Page 87: 4.1 Rohs Compliancy

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 87 4 equipment description (logistics) this section defines the list of deliverables for the sopho 2000 ips and sopho ips dm and dmr. The dmr was not introduced with the 2000 ips call processing software r6.2, but is part of...

  • Page 88: 4.2 Basic System Packages

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 88 the following table shows an overview of the components that are not rohs compliant and that will be phased out, for some of these an alternative exists: existing board (to be phased out) alternative board 9600 511 51245 ...

  • Page 89

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 89 the basic module of the sopho 2000 ips is the pimmg (pbc). The system capacity is defined by building configurations from 1 to maximum 8 pimmg (with the 2000 ips sw 3200 series r6.2). In case a dual processor configuratio...

  • Page 90: 4.4 Installation Hardware

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 90 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 9600511530 01 ips dm pimmd (pbc) sn1651 ipsmd pz-pw131 109p0624h7d09 fan front cover assem (pbc) label base b upto 11 - x x dm pimmd port interface m...

  • Page 91: 4.5 Power Unit

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 91 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151380 rack mount kit(j) - x x 2 ru (19 inch) rack mounting bracket kit. • qty two brackets per kit. • one kit is required for each pimmd when ...

  • Page 92

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 92 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151428 spn-cp24b mp(pbc) upto 9 x x - main processor: one card required per system. • cpu: amd elan sc520 pentium equivalent • memory: (from=8m...

  • Page 93

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 93 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151429 spn-cp31a mp(pbc) upto 9 - - x remote processor for remote pim over ip one card required in each remote pim. • cpu: amd elan sc520 penti...

  • Page 94

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 94 11 it’s a small world not available 4.7 firmware processor (fp) card firmware processors (fp) are required when more than 2 pims are used. For a 1 or 2 pim configuration a firmware processor is not required as this is sta...

  • Page 95

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 95 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051150114 pn-8lcaa x - - 8l analogue line circuit • loop resistance: max. 600ohms • message waiting control: 8 circuits • momentary open: 8 circui...

  • Page 96

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 96 note: the first analogue card in an ips dm should be the 4lcaa as the ips dm is not equipped with a ringing generator. 4.8.2 digital station the following cards are applied for digital lines. To these cards the dterm seri...

  • Page 97

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 97 card can offer power failure switch over from internal analogue lines to external analogue lines. 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151244 pn-8cotu see note x x x 8-line central...

  • Page 98

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 98 9600 51151289 pn-8rstg x x - 8 circuit pb receiver dtmf register used with analogue single lines. 960051102787 pn-4rsth 10 x x - 4 circuit frequency shift key (fsk) sender card for analog station cli-fsk (sirio terminal b...

  • Page 99

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 99 32-party x 1 feature comparison cftb (will be phased out) cftc station controlled conference x x (note) attendant controlled conference x x (note) meet-me conference --- x group calling – automatic conference x x group ca...

  • Page 100

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 100 4.8.7 digital announcement 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051150115 pn-4datc x x - 4 circuit digital announcement trunk (120 seconds per channel) 4.8.8 relay 12nc description r...

  • Page 101

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 101 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151236 spn-16vctaa ip pad-a upto 8 x x x 16-channel codec card for ip-pad: • voice compression protocols: • g.723.1, g.729a, g.711, • fax (14....

  • Page 102

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 102 the application processor (ap) cards reside directly under the control of the mp. The following ap cards can be used in the system. The following conditions apply (2000 ips), independent from the number of lt ports used ...

  • Page 103

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 103 the following isdn trunk interfaces are available: basic and primary rate trunk interface and d-channel handler card for the 2ilca. 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151285 spn...

  • Page 104

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 104 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051151233 spn-sc03b 8ich(ap) x x - isdn station -channel handler card: • provides the d-channel signaling interface and controls a maximum of fou...

  • Page 105

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 105 support of future qsig features are part of the roadmap and are described in section future. The following card provides the q-sig interface via a point-to-point 2mbit interface. A q-sig interface requires a ccis card so...

  • Page 106

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 106 4.9.6 sip trunk 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051102541 spn-8sip trk-c (ap) upto 11 x x - 8-channel sip trunk card (for toplink, germany) - can be expanded to 32 channels with...

  • Page 107

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 107 960051151486 pz-m537 upto 11 x x - memory expansion card for ap00 card: • the system capacity is expanded when pz-m537 is mounted on pn-ap00 (ap00) card. • ap00 supports up to 1,600 call records received without pz-m53 a...

  • Page 108

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 108 feature ap00-b (with sc-3005 ap00 prog-d1) (will be phased out) ap00-d (with sc-3561 ips mrca prog-c1) pms-ip + ap00-d (with sc-3561 ips mrca prog-c1) pms-ip without ap00-d remarks printout for totaled call charge per st...

  • Page 109: 4.11Power Fail Transfer

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 109 4.10the 8-port in-skin switching hub (obsolete) note: this card in not rohs compliant and will be phased out. 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960051102498 spn-8etia ether sw 10 til...

  • Page 110

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 110 960051151013 48-tw-0.7 conn ca x - - ac power cord; • connects to ac240 v (60 hz) via power distribution board. • wires fg, neutral and line to terminals in the base unit. 960051151061 ac cord-b- a x - - ac power cord - ...

  • Page 111: 4.13Software And Licenses

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 111 960051151007 rs prt-15s ca- a x x - rs-232c cable, 49.2 ft. (15.0m); • connects spn-ap00 to printer 960051151021 rs rvs-4s ca-c x x - rs-232c cable, 13.1 ft. (4.0m) 4.13software and licenses the following sections give a...

  • Page 112

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 112  isdn pri expansion from 5 to 8 cards  remote pim (required for ip system) 4.13.2 system software 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960052150585 64 port sys soft – 3200 series r6...

  • Page 113

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 113 960052150620 ipt 4 cards x x - adds support for up to four ip trunk cards 960052150628 ipt 8 cards x x - adds support for up to eight ip trunk card. Available with 2100 series software or higher. 960052150624 eccis x x -...

  • Page 114: 4.15Patch Panel

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 114 960051151300 alarm dspp upto 11 x x x external alarm display unit. Requires locally supplied cable to connect between alarm dspp and mdf. Provides power-on, major - alarm and minor-alarm indications. Note: discontinued. ...

  • Page 115: 4.18Desktop

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 115 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960050221410 matworx ips (pbc) till 8 x x x sw cd-rom matworx 6.3.2 960050221410 matworx ips (pbc) 9 x x x required to provide new r9 matworx featur...

  • Page 116

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 116 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 9600 53780033 dtr-2dt-1p (bk) tel x x x 2 line non-display digital terminal: • 2 flexible line keys with 2-color led • eight function keys • built-i...

  • Page 117

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 117 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960053780095 dcr-60-1p (bk) console x x x 60 button dss/blf or add-on module; • requires 8w ac adapter 4.18.2.1 digital adapters 12nc description r ...

  • Page 118

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 118 960053780093 itr-16d-2p (bk) tel eol 16 button with display ip terminal 960053780028 itr-16d-3p (bk) tel x x x 16 button with display ip terminal • ethernet switch port • 24 character by 3 line display • four soft-keys •...

  • Page 119

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 119 4.18.5 dterm desi labels desi labels are the labels used behind the transparent cover of the dterm phones, for e.G. Type of dterm station a separate label is available, it is possible to customize these labels using the ...

  • Page 120

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 120 12nc description r e le a s e 2 0 0 0 ip s ip s d m ip s d m r function 960012058000 ac/dc adapter 24v/8w int x x x ac/dc adapter 24v/8w for the itr-8d-2p, itr-16d- 2p and dcr-60-1p console (int version) 960012059000 ac/...

  • Page 121

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 121  via patch panel mdf options: the following mdf options are available (selection in prophix): mdf option cables options connection block options no mdf  no cables  cables 2 meter  cables 4 meter  cables 8 meter...

  • Page 122

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 122 two 38ah batteries per 2-pims provides 4-hours two 65ah batteries per 4-pims provides 4-hours two 65ah batteries per 2-pims provides 8-hours the external battery cabinet is only possible in case a floorstanding stack ins...

  • Page 123

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 123 9600 016 42000 cable rj21-rj21 4mtr x x x 25 pair mdf cable from pim to mdf (sofycom) 4mtr 960 0 016 43000 cable rj21-rj21 8mtr x x x 25 pair mdf cable from pim to mdf (sofycom) 8mtr 9600 016 44000 rj21-rj21 4m 90 deg x ...

  • Page 124

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 124 9600 075 08100 sopho dterm ug-se se 9600 075 09100 sopho dterm ug-dk dk 9600 075 73000 sopho dterm ug-pt pt 4.19.1.2 country version support the list of deliverables (lod) for 2000 ips / ips dm sw r6.2 is defined based u...

  • Page 125: Feature Description

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 125 5 feature description index to features: 2 way calling ....................................154 account code.....................................130 add-on module .................................130 alarm indications.......

  • Page 126

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 126 call forwarding - override ................140 call forwarding - override - ccis ...183 call forwarding set by disa ............148 call hold............................................155 call park.........................

  • Page 127

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 127 dialed number identification service (dnis)............................................134 dictation equipment access ..............159 did addressing .................................192 did addressing and dod addressin...

  • Page 128

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 128 hot line – ccis ................................186 hotel/motel attendant console .........155 hotel/motel front desk instrument...156 hotel/motel printer service for ip-pms (r11) ...........................................

  • Page 129

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 129 open application interface (oai) .....163 outgoing trunk queuing - ccis.......188 overflow for tas queue...................162 pad lock ............................................163 paging access - ccis ..................

  • Page 130

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 130 system speed dialing ........................173 programmable length of abbreviated code (r11).................................173 system speed dialing (r12.1)...........197 system speed dialing (r8)................173 t...

  • Page 131

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 131 the lcd on multiline terminals is used to provide alphanumeric information including clock/calendar and call processing information. Station application all multiline terminals with an lcd display. Analog port adapter th...

  • Page 132

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 132 this feature allows a station user to ask an attendant for assistance in originating a call. Three methods are available: non-delay, delay, and passing dial tone. Attendant camp-on this feature permits the attendant to h...

  • Page 133

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 133 attendant do not disturb setup and cancel the attendant has the ability to enter and remove individual stations from do not disturb (dnd). Additionally, the attendant can set one preassigned group of stations into, or ou...

  • Page 134

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 134 2. Attendant loop release feature cannot be used when this feature is used. 3. Semi-automatic camp-on over ccis is not supported. 4. Oai cannot be used where the system uses the semi-automatic camp-on. Attendant support ...

  • Page 135

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 135 individual trunk access the attendant console is provided with the ability to access each individual trunk by dialing an associated identification code. This allows detection of faulty trunks during regular testing or af...

  • Page 136

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 136 attendant override this feature permits an attendant to enter a busy connection (station or trunk) using the attendant console. When this feature is activated, a warning tone is sent to the connected parties after which,...

  • Page 137

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 137 this feature allows the system to prioritize incoming calls by trunk route and on a per station basis, when the call enters an acd queue. When a call is considered as a priority, it is placed at the beginning of the queu...

  • Page 138

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 138 this feature works as a timed reminder. When a call remains on hold, camp-on or ringing unanswered for a fixed interval after being transferred, the station that initiated the hold, transfer, or camp-on is automatically ...

  • Page 139

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 139 two parties. The single line telephone user uses the hold feature to alternate between the two parties. Call back this feature allows a calling party to set an automatic call back when a busy or no answer condition is en...

  • Page 140

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 140 answer can be set by the individual station user, an attendant console, or by a multiline terminal with a secondary appearance of the station's extension. Call forwarding - destination this feature allows a station (a) u...

  • Page 141

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 141 split call forwarding - no answer this feature allows internal and external calls to a busy extension to be rerouted to separate destinations. Destinations may be an internal station, attendant console, or voice mail. An...

  • Page 142

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 142 without answering incoming calls or held calls that terminate to the line keys of a multiline terminal, the calls can be transferred to a pre-programmed station or voice mail system. Two transferring destination number c...

  • Page 143

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 143 2) r11 software provides an option to choose “blinking or not” of the calling party number display, when receiving an incoming call to a dterm. Caller id - station (etsi-fsk), cli on analogue station (r10) this feature e...

  • Page 144

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 144 class of service this feature permits all stations to be assigned a class of service in accordance with the degree of system use desired. The class of service is used to assign restrictions for trunk access and feature a...

  • Page 145

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 145 group call - 2-way calling this feature enables a station user to page a maximum of 31 parties simultaneously except the group call leader. After one of the paged parties answers, paging becomes 2- way calling between th...

  • Page 146

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 146 delayed hotline (r12.2) when a station user goes off-hook and waits for a pre-programmed time without dialling, the station user is automatically routed to a predetermined station or an operator (desk console). If the st...

  • Page 147

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 147 prior to r12.2, when a dterm user enters wrong character or number during directory search or directory data entry, the user cannot modify the input characters or numbers (need back from the start). In r12.2 software, th...

  • Page 148

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 148 this feature allows name assignment for a did number received from a public network, and displays the name on an lcd of a multi-line terminal or attendant console. Direct inward system access (disa) this feature allows a...

  • Page 149

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 149 by a green led associated with each button. In addition, the multiline terminal user can set/cancel the dnd status of other stations using the dnd console. Message waiting console this feature allows a dss/blf console un...

  • Page 150

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 150 required hardware - spn-ap00b mrc-e(ap) do not disturb - hotel/motel this feature allows the attendant console(s), hotel/motel front desk instrument(s), guest stations or property management system (pms) terminal(s) to p...

  • Page 151

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 151 if necessary, the terminal can be temporarily logged out and can be used as someone’s own terminal by login with his/her station number & password. After he/she logged out the terminal, the terminal is automatically lo...

  • Page 152

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 152 e&m tie lines the sopho 2000 ips supports both 2 and 4-wire, type i and type v, e&m tine line connection to other sopho ips systems. An odt (outbound dialing trunk) card is required for 2 or 4-wire e&m tie line interface...

  • Page 153

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 153 required hardware: tie line trunk: 4odt, e1 trunk or ccis paging trunk: 8cot with dk00, or 4odt extended smdr - ccis, ips to ips, ips to sv7000 (r9) extended smdr allows both office number and pstn calling number to ...

  • Page 154

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 154 assembler/disassembler (ippad) and voice compression trunk (vct) are required for facsimile uses over ip network same as legacy stations. The facsimile transmission procedure (t.30 or g.71 1/g.726 pass-through) is suppor...

  • Page 155

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 155 this feature allows a multiline terminal/single line telephone to page a maximum of fifteen parties simultaneously including the originator. After one of paged parties answers, the paging becomes the 2 way calling betwee...

  • Page 156

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 156 hotel/motel front desk instrument a multiline terminal with lcd can be programmed to function as a hotel/motel (h/m) front desk instrument. This can be used to set and cancel standard h/m features such as message waiting...

  • Page 157

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 157 voice mode: allows an incoming call to terminate with voice announcement. tone mode: allows an incoming call to terminate with ringing. Internal zone paging with meet-me this feature allows the attendant console and ...

  • Page 158

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 158 add-in modules. Add-in modules provide a user friendly intuitive method to customize the pbx database. Message center interface (mci) this feature provides an interface with a customer supplied voice mail system (vms) th...

  • Page 159

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 159 voice message waiting - individual when setting message waiting, an originating station user announces the message to be recorded after dialing the station number. Miscellaneous trunk access this feature allows the conne...

  • Page 160

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 160 from r12.1 software, 2000 ips supports basic mobility access (ma) feature including enquiry calls and activation/deactivation by user, with enhancements in r12.2 for call forwarding and cli (this feature is equivalent of...

  • Page 161

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 161 7. The ma user can alternate between first call and second call by doing the 1) to 6) above. Send cli of outside caller to remote ma user (r12.3) when an outside caller dials in to an ma station and that call is forwarde...

  • Page 162

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 162 when the attendant console is in night service, any operator directed calls (dial 0 calls) are automatically routed to a preprogrammed station. Priority calls and off-hook alarms which terminate to an attendant are also ...

  • Page 163

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 163 prior to r12.1, when a failed did call (destination busy, no answer, etc.) is forwarded to a dterm attendant position in the night mode, the call is routed to the attendant position and continues ringing at the attendant...

  • Page 164

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 164 direct privacy release this feature allows a station user with a secondary appearance of another extension in the system to access that extension when it is being used by someone else. This feature allows for a simplifie...

  • Page 165

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 165 when room cut-off feature is set or canceled from an administrative terminal, date & time, guest station number, and setting/canceling station number (or terminal type) are printed out. - check-in/check-out set/cancel wh...

  • Page 166

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 166 microphone control all multiline terminals are equipped with a microphone control button with an associated led. Multiple line operation this feature allows for the appearance of multiple lines on the flexible line keys ...

  • Page 167

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 167 volume control multiline terminals are equipped with common volume control keys for: built-in speaker / handset receiver volume. ring volume. c.O. Transmission level. lcd contrast. ring tone frequency the volum...

  • Page 168

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 168 between the main site and remote site, the remote site automatically changes over to a survival mode and operates as a stand-alone system. Reserve power this feature provides backup power from a 24v battery source in the...

  • Page 169

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 169 security alarm this feature provides an indication on the attendant console when a contact closure occurs. Semi-automatic attendant camp-on this feature permits the attendant to hold an incoming call in a special mode wh...

  • Page 170

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 170 and trap. This feature also enables the network management system (snmp manager) to manage the 2000 ips via network address translation (nat). Software line appearance (virtual extensions) this feature permits assignment...

  • Page 171

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 171 station hunting - secretarial this feature allows assignments to be given to members of terminal and circular hunting groups to reroute calls (when their hunting group is all busy) to a back-up hunting group. Station mes...

  • Page 172

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 172 prior to r11, 2000 ips supports the isdn colp/colr supplementary service based on the etsi standards. In r11 software, the ips also supports the isdn colp/colr based on the spanish national standards used by telefonica. ...

  • Page 173

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 173 - “account code access code” + “account code” + “trunk access code” + “outside telephone number” - “forced account code access code” + “forced account code” + “trunk access code” + “outside telephone number” - “authoriza...

  • Page 174

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 174 globally unique ip address before sending packets to the outside network. Nat is configured on the router at the border of the inside network and the outside network. Nat is used for efficient use of global ip addresses ...

  • Page 175

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 175 this feature allows an agent in a ucd group to log their station onto or off of the group. This allows the system to control whether a call directed to the pilot number of the ucd group goes to that station or not. This ...

  • Page 176

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 176 did number, features/applications can be retained by the employee at any location in the network. This allows the mobile/visiting employees to retain their productivity. User mobility supports two scenarios. 1. User move...

  • Page 177

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 177 voice over ip allows the system to transmit voice conversations over a corporate intranet using itut h.323 protocol. Whisper page this feature allows a secretary to interrupt the boss in a private way. By pressing a feat...

  • Page 178: 5.2 Ccis Features

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 178 5.2 ccis features networking - a powerful feature of the sopho 2000 ips that sets it above competitive systems of comparable size. This concept is based on the common channel inter-office signaling (ccis) protocol. This ...

  • Page 179

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 179 can receive administrative support from the another site. multiple call forwarding all/busy/no answer this feature allows the last hop of a multiple call forwarding sequence to be forwarded over a ccis network to a sta...

  • Page 180

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 180 ccis over ip supports connectivity between legacy terminals, ip terminals, and legacy– to-ip terminals. The mp card manages control signals in both types of connections. For peer-to-peer connection, the voice data is tra...

  • Page 181

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 181 5.2.1 ccis over e&m lines example with leased line: example with e&m tie-line network: pn-2odtb - e&m tie line cards and spn-sc00 cch-d channel handler required per site connected. When building a point-to-point network,...

  • Page 182

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 182 5.2.3 ccis over isdn (event driven) isdn pri (30prta) or bri (4brta) cards and a ccis channel handler (spn-sc00 cch-d) card are required per site connected. In the pri card 29 voice channels remain, in the bri card 3. Wh...

  • Page 183

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 183 busy verification - ccis this feature permits an attendant, via the attendant console on the 2400 ipx or the 2000 ips, to interrupt a busy station’s call at another switching office connected through ccis. Call back - cc...

  • Page 184

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 184 this feature allows a station user to transfer incoming or outgoing central office, intra- office and inter-office calls to another station in the ccis network, without attendant assistance. Call transfer - attendant – c...

  • Page 185

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 185 is also applicable when the distant systems are 2400 ipx not supporting peer-to-peer connections. Centralized billing - ccis this feature is used to collect billing information from each office within the network and to ...

  • Page 186

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 186 distinctive ringing – ccis this feature provides distinctive station ringing patterns for terminated calls, through the ccis network, so that a station user can distinguish between incoming internal and external calls. D...

  • Page 187

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 187 this feature provides an indication on external equipment when the ccis link is connected/disconnected, when the system is initialized, or when the cch is in make- busy. Link reconnect - ccis this feature provides the sy...

  • Page 188

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 188 this feature routes calls normally directed to the attendant console to a pre-selected station in another office, through the ccis network, when the night mode has been entered. Night connection - flexible – ccis this fe...

  • Page 189

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 189 this feature allows the system to be programmed to restrict outgoing calls, through ccis, according to specific area and/or office codes. This restriction is determined on the basis of a three-digit area code or six-digi...

  • Page 190: 5.3 Isdn Features

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 190 5.3 isdn features 5.3.1 isdn interfaces two standard isdn interface cards for the 2000 ips are available: the digital trunk interface card with d-channel handler provides a single 30b+d circuit for isdn pri. the basic ...

  • Page 191

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 191 the aoc service. The aoc information received will be displayed on the calling dterm display phone, and be output to the smdr port. (see table above for country release.) aoc-e output to pms interface (r12.2) in r12.2 so...

  • Page 192

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 192 calling party to set an automatic call back when a called party is busy. When the busy station becomes an idle, the station that sets the call back will be called. A maximum of 32 stations can access this feature simulta...

  • Page 193: 5.4 Oai Features

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 193 caller will receive a special tone to notify the 2nd choice trunk is seized. This will provide the caller an option to stop making the expensive call. The notification tone will continue about 240ms to 320ms (fixed value...

  • Page 194

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 194 prior to r11, when a station monitored by smfr makes an outgoing trunk call (ccis/qsig/isdn), the system provides only the outgoing trunk information in the system to oai. In r12.1 software, the system can provide the co...

  • Page 195

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 195 camp-on-busy recall can be queued and answered by oai (r11) for recall of oai scf10: camp-on-busy recall can be queued and answered by oai application (e.G. Pc-attendant) called number, of rerouted did call via ccis, ove...

  • Page 196

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 196 note: when the incoming call by call forwarding is answered by dterm sub-line, the ips sends smfn fn=2 sts=1. Forward notification across ccis (r9) r9 enhancement allows the ips to send a distinctive notification for cal...

  • Page 197

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 197 o the status of the busy station can be notified via oai (smfn 2-8). O the status of the held party can be notified via oai (smfn 6-1). - when the broker’s call (shuttle) is activated by the busy station, the status of t...

  • Page 198

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 198 tc-certificate: a local training centre must have a good training environment and enough equipment to enable tr-certified trainers to deliver an optimal training session. More information about this subject can be found ...

  • Page 199: 6.1 Operating Environment

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 199 6 installation, programming and maintenance 6.1 operating environment operating condition temperature relative humidity normal operations 5 o c - 30 o c 41 o f - 86 o f 15% - 65% non-condensing short periods ** -0 o c - ...

  • Page 200: 6.3 Ac Power Requirements

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 200 6.3 ac power requirements description specifications ac input voltage 90 to 132vac, or 180 to 264vac; 47 to 64hz ac input current 3.5a at 100v, 2.0a at 200v 6.4 installation the following items are required for correct o...

  • Page 201

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 201 the cpu has been loaded with system sw and software keys (licences). the system has been loaded with standard scripting, based upon the configuration defined in prophix. on start up therefore all boards will be “in...

  • Page 202: 6.5 System Administration

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 202 6.5 system administration in this system, the customer administration terminal (cat) or maintenance administration terminal (mat) is used for programming the system data. The cat is a digital multi-function telephone (dt...

  • Page 203

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 203 3. The commands cm00 (office data all clear) and cm01 (office data partial clear) cannot be accessed from the cat. The cat cannot delete itself from the system program. 4. Only two customer administration terminals can b...

  • Page 204

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 204 6.5.4 matworx matworx is a graphical user interface (gui) program that provides an efficient method for maintaining the pbx database. This program contains extensive help files, usage wizards and tool tips, with hyperlin...

  • Page 205

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 205 rom check readout of generic program. display of fault/fault cleared messages. on site or remote access to the system. printout of system data (when printer is connected to pc). display and setting of system cl...

  • Page 206

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 206 release 11: - add-in enhancement for quick station data entry o quick data entry of station number, trunk number and trunk route number. (consecutive number entry at 1-click operation, etc.) o easy setting of station dat...

  • Page 207

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 207 command script interface allows an external application to communicate with the 2000 ips system via matworx based on the pbx script data. The external application is system programming assistant (spa) which is developed ...

  • Page 208

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 208 o a modem at the maintenance center and one at each remote site. (when the internal o modem of the main processor (mp) is used, no modem at each remote site is required) o a cable for connection between the mp and the on...

  • Page 209

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 209 mp download process service conditions general service conditions the mp program download can be executed to the pn-cp24/pn-cp31 (mp card) when a pz-m606-a is mounted. for the retrofit and backup cpu systems remote d...

  • Page 210

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 210 port no. 3000 is used for the file transfer (control), and port no. 2999 is used for the file transfer (port 21-file transfer (control), port 20-file transfer: default). if you read the issue number of the standby side...

  • Page 211

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 211 by command entry from the matworx in the main site, the mp software stored in the external ftp server is downloaded to the mp of the remote site pim. The downloaded software stored in the mp is changed over to the existi...

  • Page 212

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 212 when a fault occurs in a central processor system, switch network processors. Many other miscellaneous system messages and change of key status messages are also printed. 6.5.5.4 station service status display (r12.2) by...

  • Page 213

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 213 the upload to 2000 ips use case. Download from 2000 ips a service engineer can choose to get the configuration from the 2000 ips as an alternative to import the ‘(hoorn)’ script. All configuration items that are shown in...

  • Page 214

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 214 web browser: any http 1.1 compliant internet explorer 5.5 or greater input device: mouse & 101 key keyboard mouse & 101 key keyboard operating system: windows® 98 se windows 2000/xp with latest service pack the following...

  • Page 215: 6.6 Documentation

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 215 6.5.7.1 ma4000 ips assistant the ma4000 ips assistant gives the power of station management directly to the end- user. Limited by access rights, an administrator can allow his users to manage their own phones. Supported ...

  • Page 216

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 216 matworx installation guide 3522 009 11531 installation/maintenance technicians matworx user guide 9600 075 26001 end user sopho dterm u.Guide anlg 9600 075 01001 end user sopho desk cons. U.Guide 9600 075 02001 end user ...

  • Page 217: 6.7 Training

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 217 all functionality offered on the 2000 ips platform with applications is described in the product descriptions of the associated subject. 6.7 training 6.7.1 end-user training the information for the customer services cent...

  • Page 218

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 218 terminals dterm (analogue, digital, ip) and deskcon 753: 12 months warranty, option for 3 years maintenance 2000 ips sw and licenses: 6 months warranty on current and previous release, 3 years maintenance obligation ...

  • Page 219: 6.9 Service Information

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 219 cooling fan recommendation: we recommend that the cooling fan that is mounted in the right side of the pimmd should be replaced every four years in order to ensure proper functioning of the cooling system. Via the fault ...

  • Page 220: Specifications

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 220 7 specifications 7.1 processors the sopho 2000 ips, ips dm, ips dml, and ips dmr are distributed multiprocessor systems. Their control system consists of a main processor (mp), firmware processors (fp), and application p...

  • Page 221

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 221 name code remarks pz-m606a ethernet control card: • mounted on mp card to accommodate the ethernet and transmit/receive a signal of tcp/ip protocol. • 10 base -t/100 base-tx twisted pair cable is connected directly to th...

  • Page 222: 7.2 Power

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 222 firmware processor (fp) firmware processors (fp) are required when more than two pims/modular chassis (mc) are used. The fp provides supervision and status analysis of line/trunk ports, which reside in the mc or pim. The...

  • Page 223

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 223 ambient temperature 0 to 40 relative humidity max. 90% (non-condensing) 7.2.5 electrical characteristics (central office trunk description specifications insulation resistance 15 mega-ohms or more at 100vdc dc resistance...

  • Page 224: 7.3 System Capacity

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 224 7.3 system capacity 7.3.1 release overview of system parameters and specifications with release r8 of the 2000 ips software a maximum of 64 fp/ap can be deployed in the remote pim network. The maximum number of remote si...

  • Page 225

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 225 7.3.2 ips system capacity capacity per pim note 1 item 1pim 2pim 3pim 4pim 5pim 6pim 7pim 8pim no. Of ports 64 128 192 256 320 384 448 512 no. Of cards (single mp) 12 24 36 48 60 72 84 96 lt card no. Of cards (dual mp) 1...

  • Page 226

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 226 item capacity note 1 attendant consoles max. 8 sets per system attendant terminal (dterm att position) max. 8 sets per system smdr interface max. 2 interface ports (rs232) max 1 interface port (ip) per system pms interfa...

  • Page 227

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 227 capacity comparison for releases 6, 8 and 9 the following table compares the capacities between r6.2, r8 and r9: software release comments capacities (numbers) r6.2 r8/r9 lt ports 512 1020 dtmf receivers 32 32 muber of a...

  • Page 228

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 228 7.3.3 ips dm/ips dml system capacity capacity per mc number of physical modular chassis 1 2 no. Of ports 56 112 lt card note 1 no. Of cards 7 14 no. Of ports max. 256 ports per system ap card no. Of cards 7 14 total numb...

  • Page 229

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 229 ips dm/ips dml system capacity (continued) per mc number of physical modular chassis 1 2 built-in router max. 5 cards per modular chassis dtmf sender max. 32 circuits per system dtmf receiver 16 32 sn716 desk console 8 a...

  • Page 230

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 230 7.4 ip remote network capacity total system capacity (main plus remote) item capacity lt ports 1020 ap ports 256 analog single line tel. + dterm 980 ip pad (no. Of channel) 256 dtermip/inaset (ptp connection) 952 ps 512 ...

  • Page 231

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 231 7.4.1 ips dmr capacity capacity per mc number of physical modular chassis 1 2 no. Of ports 56 112 lt card note 1 no. Of cards 7 14 no. Of ports max. 256 ports per network ap card no. Of cards 7 14 ip-pad no. Of channel 3...

  • Page 232

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 232 7.4.2 ips pimmj (as remote pim) capacity capacity per pim number of physical pims 1 2 no. Of ports 64 128 lt card no. Of cards 8 16 no. Of ports max. 256 ports per network ap card no. Of cards 12 24 ip-pad no. Of channel...

  • Page 233: 7.5 Ip Specifications

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 233 7.4.3.3 payload size for virtual ipt max. Voice channels per ipt payload size g.729a g.711 g.723.1 10 ms. 4 4 – 20 ms. 8 8 – 30 ms. 16 16 16 40 ms. 16 16 – 7.5 ip specifications item specifications remarks voice encoding...

  • Page 234: 7.6 Trunk Interfaces

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 234 ip specifications (continued) item specifications remarks dtermip/ccis virtual ipt 10 ms-40 ms (g.723.1: 30 ms unit) maximum voice channels per card 10 ms: 12 ch 20 ms: 20 ch 30 ms: 30 ch 40 ms: 32 ch payload size h.323 ...

  • Page 235

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 235 refer to below table for specifications implemented in the 2000 ips country itfc zac zb li(dbr) lo(dbr) comp.(dbr) cotcard austria k2 270 ohm+750 ohm//150nf tbr38 270 ohm+750 ohm//150nf tbr38 l: -6.0 s: -3.5 l: -1.0 s: -...

  • Page 236: Specifications

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 236 - add/delete e.164 “+” sign o add “+” sign in front of telephone number (outgoing call) o delete “+” sign in front of telephone number (incoming call) below table shows a summary of basic specifications of the sip trunk ...

  • Page 237: 7.8 Line Conditions

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 237 conditions temperature: 5°c – 40°c (when the system is operating) humidity: 20% - 80% ~ (when the system is operating) cooling cooling by fan safety standard complied with ul60950, csa22.2 no. 950, en60950, as3260 emc co...

  • Page 238: 7.9 Traffic Capacity

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 238 7.9 traffic capacity number of pims 1pim 2pim 3pim 4pim 5pim 6pim 7pim 8pim traffic capacity max. 2500 bhca max. 5000 bhca note max. 7500 bhca note max. 8000 bhca note note: the traffic load of each fp shall be 2500 bhca...

  • Page 239: 7.13Language Support

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 239 7.12ip pad compatibility table in r8 an 8-channel ip-pad card is released with a 24-channel daughter board. The table shows the compatibility of the new ip-pad card. Compression rate fax over ip (foip) modem over ip (moi...

  • Page 240

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 240 7.14.2 platform security the sopho 2000 ips system can be programmed such that access to program changes is controlled by passwords. Up to eight password levels are available. This feature, when activated, prevents unwan...

  • Page 241: System Performance

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 241 8 system performance 8.1 transmission characteristics transmission characteristics cross talk attenuation more than 70 db at 1000 hz idle circuit noise less than -65 dbm insertion loss (relative to 1khz-10 dbm) station- ...

  • Page 242

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 242 unwanted frequency components not applicable 40 db below the power of signal frequency 8.2.2 multi-frequency compelled (mfc) – r2 signal (1) mfc frequency value frequencies forward signals(hz) backward signals(hz) f0 1,3...

  • Page 243

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 243 call w aiting ring back tone 440 hz mixed with 480 hz 1 sec. On, 1 sec. Off 8.2.4 tone changes for denmark (r12.2) the following tone specifications are implemented: tone name frequencies cadence number unobtainable tone...

  • Page 244: 8.4 Dimensions And Weight

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 244 8.2.6 ringing signal description specifications frequency 20 hz (nominal) voltage 75 vrms (nominal) interruption: 2 sec. On, 4 sec. Off (for external call) 1 sec. On, 2 sec. Off (for internal call) note: the 2000 ips has...

  • Page 245

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 245 8.6 maximum feature capacities application 2000 ips speed dial 10,000 fault message types 64 station numbering 8 digit forced account code 3,000 call forward outside 496 message reminder 1024 did conversion 1,000

  • Page 246: Appendices

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 246 appendices appendix a: repairables and consumables the following overview presents which items obtained from nec are defined as repairable or consumable. Remaining items on the list of deliverables are supplied by pbc an...

  • Page 247

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 247 960051151013 48-tw-0.7 conn ca consumable 960051151029 mat ca-t consumable 960051151038 bus-0.4 ca-pa consumable 960051151371 19 inch rack bracket (b) consumable 960051151494 pz-pw131 consumable 9 960051150115 pn-4datc r...

  • Page 248

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 248 960051151492 pz-m606-a repairable 90 1.57% 960051151236 spn-16vctaa ip pad-a repairable 43 1.30% 960051151257 spn-32iplaa ip pad-c repairable 10 4.35% 960051151294 spn-30prta-qsig (ap) repairable 28 0.00% note: empty f...

  • Page 249: Handlers

    Chapter 3 terminals issue 5 univerge neax 2000 ips general description page 249 appendix b: sopho 2000 ips networking: channel cards, handlers network type type quantity max licenses (s/w activation key) trunking analogue loop start channel card pn-8cotu 1 per 8 trunks [1] none analogue analogue (e&...

  • Page 250

    Nec philips unified solutions upd 250 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals appendix c: spn-8ipla ip pad-a details compatibility table ip pad /vct 151226...

  • Page 251

    Nec philips unified solutions upd 251 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals channel allocation table ip-pad channel allocation (system data) and fax supp...

  • Page 252

    Nec philips unified solutions upd 252 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals spn-8ipla and spz-24ipla specifications: function description remarks network...

  • Page 253

    Nec philips unified solutions upd 253 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals spn-8ipla and spz-24ipla number of simultaneous calls (estimated) codec paylo...

  • Page 254

    Nec philips unified solutions upd 254 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals circuit card mounting slots vm : pz-vm00/vm00-m/vm03-m mounting slot lt00-lt1...

  • Page 255

    Nec philips unified solutions upd 255 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals sopho 2000 ips ip pad mounting conditions pn-32ipla and 16vct pn-32ipla (ip-p...

  • Page 256

    Nec philips unified solutions upd 256 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals pn-8ipla pn-8ipla (ip-pad) card is to be mounted in the lt00 and/or lt04 slot...

  • Page 257

    Nec philips unified solutions upd 257 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals sopho ips dm and sopho ips dmr mounting conditions circuit card mounting slot...

  • Page 258

    Nec philips unified solutions upd 258 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals using 16 channels (ip-pad is in lt00): using 24 channels (ip-pad is in lt00) ...

  • Page 259

    Nec philips unified solutions upd 259 of 259 © nec philips unified solutions, 2006. All right reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Chapter 3 terminals pn-32ipla pn-32ipla-a (ip-pad) card is recommended to be mounted in the lt04 ...