NEC Versa E6000 Disassembly Manual

Summary of Versa E6000

  • Page 1

    Versa e6000 disassembly manual.

  • Page 2

    Nec versa e6000/pb easy note g5 disassembly manual page 2 table of contents overview.................................................................................................................................................................3 technician notes........................................

  • Page 3

    Nec versa e6000/pb easy note g5 disassembly manual page 3 overview this document contains step-by-steps disassembly instructions for the versa e6000/easynote g5 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the s...

  • Page 4

    Nec versa e6000/pb easy note g5 disassembly manual page 4 hazardous voltage there is hazardous voltage present inside the computer when it is connect to an ac supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, con...

  • Page 5

    Nec versa e6000/pb easy note g5 disassembly manual page 5 removing the battery perform the following steps to remove the battery: 1. Make sure to power off the versa e6000/easynote g5. 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in fig. 1 fig....

  • Page 6

    Nec versa e6000/pb easy note g5 disassembly manual page 6 removing the memory module to remove the memory module, first remove the battery (see removing the battery ), then perform the following steps: 1. Release the one screw retaining the memory module cover. Fig. 2 removing the screw retaining th...

  • Page 7

    Nec versa e6000/pb easy note g5 disassembly manual page 7 removing the mdc modem to remove the mdc modem, first remove the memory module cover (see removing memory module ) then perform the following steps: 1. Release screws and disconnect cable on mcd modem as shown in fig. 4 fig. 4 mdc modem 2. Li...

  • Page 8

    Nec versa e6000/pb easy note g5 disassembly manual page 8 removing the hard disk drive to remove the hard disk drive, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws as shown in fig. 5 fig. 5 removing the hard disk drive cover 2. Release t...

  • Page 9

    Nec versa e6000/pb easy note g5 disassembly manual page 9 removing the keyboard to remove the keyboard, first remove the battery (see removing the battery ), then perform the following steps: 1. Release the keyboard cover from the rear of the system as shown in fig. 7 fig. 7 releasing the keyboard c...

  • Page 10

    Nec versa e6000/pb easy note g5 disassembly manual page 10 3. Lift up the keyboard and disconnect it from the system as shown in fig. 9 fig. 9 disconnecting the keyboard flat cable removing the optical disk drive to remove the odd, first remove the battery (see removing the battery ) and remove the ...

  • Page 11

    Nec versa e6000/pb easy note g5 disassembly manual page 11 2. Flip over the unit, and push the odd module out from the base unit as shown in fig. 11 fig. 11 pushing the optical drive out from the base unit.

  • Page 12

    Nec versa e6000/pb easy note g5 disassembly manual page 12 removing the lcd module to remove the lcd module first remove the battery (see removing the battery ) and remove the keyboard (see removing the keyboard ) then perform the following steps: 3. Remove the screws retaining the heat plate as sho...

  • Page 13

    Nec versa e6000/pb easy note g5 disassembly manual page 13 6. Open up the lcd lid, release the screws and the lcd cable connector. Fig. 15 removing screws retaining lcd cable connector 7. Carefully lift up the lcd module. Removing the wlan card module to remove the wlan card module first remove the ...

  • Page 14

    Nec versa e6000/pb easy note g5 disassembly manual page 14 removing the lcd panel to remove the lcd panel, first remove the lcd module (see removing the lcd module ), then perform the following steps: 1. Use a pin to remove the rubber cover on the lcd module as shown in fig. 17 2. Remove all screws ...

  • Page 15

    Nec versa e6000/pb easy note g5 disassembly manual page 15 4. Carefully lift up the lcd panel. 5. Remove the screws at both sides of the lcd panel in order to release the lcd hinges as shown in fig. 19 fig. 19 removing the lcd panel hinges removing the cpu to remove the cpu first remove the battery ...

  • Page 16

    Nec versa e6000/pb easy note g5 disassembly manual page 16 2. Remove the cpu fan screws, disconnect the cpu fan connector and remove the cpu fan. Fig. 21 cpu fan 3. Unscrew screws on cpu heat sink in descending order (3 Æ2Æ1) as shown in fig. 22 fig. 22 cpu heat sink m2.5x6.5 silver m2.5x4 copper.

  • Page 17

    Nec versa e6000/pb easy note g5 disassembly manual page 17 note: beware of screws use on the cpu heat sink! Make sure to use the screw size m2.5x4, otherwise it might cause damage to the cpu die. When install heat sink, screws must be secured in ascending order (1 Æ2Æ3). 4. Unlock the cpu from the c...

  • Page 18

    Nec versa e6000/pb easy note g5 disassembly manual page 18 removing the top cover to remove the top cover , first remove the battery (see removing the battery ), remove the hdd (see removing the hard disk drive ), remove the optical disk drive (see removing the optical disk drive ), remove the keybo...

  • Page 19

    Nec versa e6000/pb easy note g5 disassembly manual page 19 2. Release all screws on the top cover as shown in fig. 25 fig. 25 top cover screws 3. Disconnect the touch pad connector as shown in fig. 26 fig. 26 touch pad connection 4. Carefully lift up the top cover. A = m2.5x5 silver b=m2.5x6 silver.

  • Page 20

    Nec versa e6000/pb easy note g5 disassembly manual page 20 removing the touch pad to remove the touch pad, first remove the top cover (see removing the top cover), then perform the following steps: 1. Unscrew the screws on the top cover as shown in fig. 27 fig. 27 touch pad 2. Carefully separate the...

  • Page 21

    Nec versa e6000/pb easy note g5 disassembly manual page 21 removing the main board to remove the main board, first remove the top cover (see removing top cover ) then perform the following steps: 1. Remove the hex screws from the vga port as shown in fig. 28 fig. 28 vga port 2. Unscrew those screws ...

  • Page 22

    Nec versa e6000/pb easy note g5 disassembly manual page 22 3. Disconnect audio board from main board as shown in fig. 30 lifting up the audio board 4. Disconnect speaker and lid switch connectors from the main board as shown in fig. 31 fig. 31 connectors on main board.

  • Page 23

    Nec versa e6000/pb easy note g5 disassembly manual page 23 5. Unscrew the screws encircled in fig. 32 fig. 32 screws on main board 6. Lift up the main board as shown in fig. 33 fig. 33 lifting up the main board a = m2.5x8 b = m2.5x5 silver.

  • Page 24

    Nec versa e6000/pb easy note g5 disassembly manual page 24 removing the speaker assembly to remove the speaker assembly, first remove the main board (see removing the main board ) then perform the following steps: 1. Remove the screws holding speaker assembly as shown in fig. 34 fig. 34 speaker asse...

  • Page 25

    Nec versa e6000/pb easy note g5 disassembly manual page 25 dip switch settings jumper 1-2 open open close open open 3-4 open open close close close 5-6 open close close close open logo nec nec nec nec pb setting jp consumer jp commercial apac hk/cn eu status 2 6 5 1 10 9.

  • Page 26

    Nec versa e6000/pb easy note g5 disassembly manual page 26 screws m3x8 silver m2.5x6.5 silver m2.5x9 silver m2.5x7 silver m2.5x5 silver m2x7 silver m2.5x8 silver m2x8 silver m2.5x10 silver m2x4 silver m2.5x6 silver m2.5x4 copper.

  • Page 27

    Nec versa e6000/pb easy note g5 disassembly manual page 27 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consen...