Summary of Versa M540/PB EasYnote R7
Page 1
Nec versa m540 disassembly manual.
Page 2
Nec versa m540/pb easynote r7 disassembly manual page 2 table of contents overview.................................................................................................................................................................3 technician notes..........................................
Page 3
Nec versa m540/pb easynote r7 disassembly manual page 3 overview this document contains step-by-steps disassembly instructions for the versa m540/easynote r7 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the scre...
Page 4
Nec versa m540/pb easynote r7 disassembly manual page 4 hazardous voltage there is hazardous voltage present inside the computer when it is connect to an ac supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, conta...
Page 5
Nec versa m540/pb easynote r7 disassembly manual page 5 removing the battery perform the following steps to remove the battery: 1. Make sure to power off the unit. 2. Turn the unit upside down. 3. Unlock the left battery lock 4. Pushing battery lock on right outward and slide the battery out of its ...
Page 6
Nec versa m540/pb easynote r7 disassembly manual page 6 removing the hard disk drive to remove the hard disk drive, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws on hdd cover and carefully open up as shown in fig. 2 fig. 2 removing the h...
Page 7
Nec versa m540/pb easynote r7 disassembly manual page 7 3. Unscrew the four screws on both sides of the hard disk drive as shown in fig. 4 fig. 4 unscrewing the hard disk drive shield screws removing the optical disk drive to remove the odd, first remove the battery (see removing the battery ), then...
Page 8
Nec versa m540/pb easynote r7 disassembly manual page 8 removing the memory module to remove the memory module, first remove the battery (see removing the battery ) then perform the following steps: 1. Release the screws retaining the memory module slot cover. Fig. 7 removing the screw retaining the...
Page 9
Nec versa m540/pb easynote r7 disassembly manual page 9 removing the wlan module and mdc modem module to remove the wlan module and mdc modem module, first remove the battery (see removing the battery ) then perform the following steps: 1. Release the screws retaining the wlan/mdc cover. Fig. 9 remo...
Page 10
Nec versa m540/pb easynote r7 disassembly manual page 10 removing the cpu to remove the cpu, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screw retaining the cpu cover as shown in fig. 12 fig. 12 cpu cover 2. Release all screws on the heat sin...
Page 11
Nec versa m540/pb easynote r7 disassembly manual page 11 3. Unlock the cpu and carefully remove it from the cpu socket as shown in fig. 14 fig. 14 unlocking the cpu.
Page 12
Nec versa m540/pb easynote r7 disassembly manual page 12 removing the keyboard to remove the keyboard, first remove the battery (see removing the battery ), then perform the following steps: 1. Use flat screw driver to unlock keyboard as shown in fig. 15 fig. 15 unlock keyboard 2. Lift up the keyboa...
Page 13
Nec versa m540/pb easynote r7 disassembly manual page 13 removing the top cover to remove the top cover, first remove the battery (see removing the battery ), remove the keyboard (see removing the keyboard ), remove the cpu (see removing the cpu ), then perform the following steps: 1. Remove gpu hea...
Page 14
Nec versa m540/pb easynote r7 disassembly manual page 14 3. Flip over the unit and remove the screws then disconnect touch pad flat cable as shown in fig. 19 fig. 19 disconnect touch pad flat cable 4. Carefully lift up the top cover, release it and put it aside. Fig. 20 removing the top cover m2.5x7...
Page 15
Nec versa m540/pb easynote r7 disassembly manual page 15 removing the lcd module to remove the lcd module, first remove the battery (see removing the battery ), remove the top cover (see removing the top cover ) then perform the following steps: 1. Release lcd hinge cover by release screw on it as s...
Page 16
Nec versa m540/pb easynote r7 disassembly manual page 16 3. Release the lcd cable and wlan antenna cable as shown in fig. 23 fig. 23 releasing the lcd cable and wlan antenna cable 4. Release the screws on the lcd hinges as shown in fig. 24 fig. 24 releasing the lcd hinges 5. Carefully lift up the lc...
Page 17
Nec versa m540/pb easynote r7 disassembly manual page 17 removing the lcd panel to remove the lcd panel, first remove the lcd module (see removing the lcd module ), then perform the following steps: 1. Use a pin to remove the rubber covers on the lcd module as shown in fig. 25 2. Unscrew all screws ...
Page 18
Nec versa m540/pb easynote r7 disassembly manual page 18 4. Unscrew all screws encircled in fig. 27 fig. 27 removing the lcd panel screws 5. Release all four screws at the side of lcd back cover. Fig. 28 remove side screws 6. Carefully lift up lcd panel together with the inverter board and disconnec...
Page 19
Nec versa m540/pb easynote r7 disassembly manual page 19 removing the main board to remove the main board, first remove the bottom cover (see removing the bottom cover ) then perform the following steps: 1. Remove side cover at both corner of the base unit as shown in fig. 29 fig. 29 removing side c...
Page 20
Nec versa m540/pb easynote r7 disassembly manual page 20 3. Release all screws as shown in fig. 31 and disconnect all speaker connection to main board. Fig. 31 lifting up the main board assembly 4. Carefully lift up the main board together with system bracket. Fig. 32 lifting up main board m2.5x5 bl...
Page 21
Nec versa m540/pb easynote r7 disassembly manual page 21 5. Remove two screws at the vga port to separate main board from system bracket. Fig. 33 releasing system bracket removing the multi card slot to remove the multi card slot, first remove the main board (see removing the main board ), then perf...
Page 22
Nec versa m540/pb easynote r7 disassembly manual page 22 removing the touch pad to remove the touch pad, first remove the top cover (see removing the top cover ), then perform the following steps: 1. Unscrew the screws on the touch pad assembly as shown in fig. 35 and remove the touch pad assembly f...
Page 23
Nec versa m540/pb easynote r7 disassembly manual page 23 2. Carefully remove the speaker assembly from system bracket and place it aside. 3. Removing screws on woofer as shown in fig. 37 fig. 37 woofer 4. Carefully separate it from bottom cover. Dip switch setting no dip switch settings are availabl...
Page 24
Nec versa m540/pb easynote r7 disassembly manual page 24 screws m2x3.5 black m2.5x7 black m2x11 silver m2x7 silver m2.5x17 black m2x3 silver m2.5x5 black m2.5x5 silver m3x7 silver m2x4 black m2.5x7 silver.
Page 25
Nec versa m540/pb easynote r7 disassembly manual page 25 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent ...