NEC WT610E Quick Setup Manual
1.
PROJECTOR PLACEMENT
Place projector on table in front of screen or
wall which will be used for displaying image.
2.
OPENING THE MIRROR
Unlock mirror cover lock switch and open
top mirror door to the open position (figure 1).
3.
CONNECTING THE POWER
Plug power cord into projector and AC outlet.
(See Figure 1 for AC Power connection.)
4.
TURNING ON THE WT610E
Turn on the main power to the projector; press the PROJECTOR POWER
SWITCH (figure 1) to the on position. Press the POWER (ON/STAND BY)
button on the projector cabinet (figure 2) or POWER ON button on the
remote control (figure 5) for a minimum of 2 seconds, when the POWER
INDICATOR turns a steady green the projector is ready to use.
5.
PROJECTOR PLACEMENT FOR PROPER SCREEN SIZE
Move projector closer or farther away from screen to fit the width of the
screen or desired size. Maximum screen size is 100” diagonal.
NOTE
as the
size of the image increases or decreases the displayed vertical image position shifts
depending on screen size (figure 3). Smaller images will have less vertical image
shift than larger screen sizes.; you will need to adjust screen height to
accommodate this shift. The distance between the projector and display surface
cannot be changed without changing image size.
CONTINUED ON REVERSE SIDE...
Quick Set-up Guide
WT610E short throw projector
POWER
BUTTON
"MENU
BUTTON
STEP-BY-STEP PROJECTOR PLACEMENT FOR FRONT SCREEN TABLE TOP USE
PROJECTOR
POWER SWITCH
AC POWER
INLET
TOP MIRROR
DOOR
COVER
LOCK
SWITCH
FIGURE 1
FIGURE 2
FIGURE 3
Diagonal Width(W) Height(H)
inches
inches
inches
inches
inches
inches
40
32
24
26.0
2.5
14.0
60
48
36
37.0
10.3
19.0
67
53.6
40.2
40.8
13.1
20.7
72
57.6
43.2
43.6
15.0
22.0
84
67.2
50.4
50.2
19.7
25.0
90
72
54
53.5
22.0
26.5
100
80
60
59.0
25.9
29.0
Image Size (4:3)
B
C
D(4:3)
Diagonal Width(W) Height(H)
inches
inches
inches
inches
inches
inches
37
32
18
26.0
2.5
17.0
40
35
19.7
28.0
4.0
18.2
83
72
40.5
53.5
22.0
33.2
92
80
45
59.0
25.9
36.5
D(16:9)
Image Size (16:9)
B
C
B Vertical distance between the bottom of the projector and the screen center
C Throw distance
D Vertical distance between the bottom of the projector and screen bottom
(screen top for ceiling mounted application)