1. DL manuals
  2. North Star
  3. Pressure Washer
  4. M157206R
  5. Installation, Operation And Maintenance Manual

North Star M157206R Installation, Operation And Maintenance Manual

Summary of M157206R

  • Page 1

    Installation, operation, and maintenance manual pressure washer : c leans dirty surfaces with high pressure water. To the owner: thank you for purchasing a northstar pressure washer. Your machine is designed for long life, dependability, and the top performance you demand! Take time now to read thro...

  • Page 2

    2 table of contents important safety instructions 2 maintenance instructions 10-11 machine component identification 3 moving and handling instructions 12 installation instructions 4-6 long term storage 12 operation instructions 7-9 troubleshooting 13 safety features 9 parts explosions 14-15 limited ...

  • Page 3

    3 machine component identification ref description ref description 1 engine 5 pump oil sight glass 2 pump oil fill/dipstick 6 startup/shutdown instructions 3 gas cap with gauge 7 fuel shutoff valve 4 battery box t m 2.) attach pr essure hose 4.) turn wate r supply on . 3.) attach g un and l ance com...

  • Page 4

    4 installation instructions i.) unpack separate and identify the components. Use the assembly instructions in this manual for assembly. Fig02225 main unit hose spray gun, lance, nozzle holder fuel tank cap (may already be installed) wheels handles hardware bag.

  • Page 5

    5 hardware bag.

  • Page 6

    6 ii.) assembly instructions iii.) pump preparation a.) remove red shipping plug from oil fill hole. B.) install vented dipstick into oil fill hole. C.) make sure the oil is 1/2 way up oil sight glass. Iv.) engine preparation a.) fill engine with sae 10w30 oil. B.) fill fuel tank with unleaded gasol...

  • Page 7

    7 operating instructions read and understand the entire manual before operating the pressure washer. Follow these instructions every time you use the pressure washer. I.) pre-operation a.) position the machine for easy access to all controls. B.) position the machine on a solid surface, with less th...

  • Page 8

    8 iv.) attach high pressure hose your pressure washer hose is equipped with quick couplers. Simply pull the collar back and push the coupler onto the nipple. Make sure the collar slides over the ball bearings. Once the connection is made, pull on the hose to assure a positive connection. V.) turn wa...

  • Page 9

    9 warning: do not inhale the exhaust from the engine. Do not point the lance at anyone even if the engine has stopped because there could be a release of water under retained pressure if the spray gun trigger is actuated. X.) cleaning warning: wear eye, ear, hand, foot and skin protection at all tim...

  • Page 10

    10 maintenance instructions *refer to the honda engine owner’s manual for engine maintenance instructions maintenance mode before performing any maintenance on the pressure washer, it must be placed in maintenance mode. A.) turn off engine b.) turn off water supply c.) bleed water from system d.) sh...

  • Page 11

    11 157205 belt tension some general rules of belt tension are: 1.) ideal tension is the lowest tension without belt slippage. 2.) over tightening decreases belt and bearing life. 3.) keep belts clean and free of foreign material that may cause slippage. 4.) tighten belts when slipping. 5.) never app...

  • Page 12

    12 moving and handling instructions maneuvering your pressure washer 1.) pull the handles up with both hands. 2.) push the pressure washer forward as you walk. Lifting your pressure washer 1.) to reduce risk of injury, it is recommended that two adults lift the pressure washer. 2.) only lift the pre...

  • Page 13

    13 troubleshooting engine will not start causes solutions low oil shutdown fill engine with the adequate amount of oil cold engine choke engine to start no fuel add gas to engine - make sure fuel shutoff valve is open pressure build-up from initial use trigger spray gun to relieve pressure engine no...

  • Page 14: M157206S

    14 item pn description qty model item pn description qty model 1 784970 783392 16 hp briggs vanguard gx660 v-twin honda 1 157205 157207 41 777352 battery box 1 all 43 777108 24" black battery cable 1 all 2a 35166 4000 ipw decal 1 157205 44 32839 42" red battery cable 1 all 2b 35166 warning decal 1 a...

  • Page 15

    15 parts explosion (continued) item pn description qty model item pn description qty model 1 2264 ½” hose 12" 20" 157205 157207 15 780368 ar, rka 45g40hn 1 157205 780352 ar pump riser 1 157205 2 777119 ½" hose clamp 2 all 777374 comet pump tws5050s 1 157207 3 2294 ½"npt x ½" hose barb 1 157207 77737...

  • Page 16

    16 this page has intentionally been left blank..

  • Page 17

    Limited warranty 17 dear valued customer: the northstar product you just purchased is built with the finest material and craftsmanship. Use this product properly and enjoy the benefits from its high performance. By purchasing a northstar product, you show a desire for quality and durability. Like al...

  • Page 18

    18 manufactured by northern tool + equipment co., 2800 southcross drive west p.O. Box 1499 burnsville, mn 55337-0499 ®.