1. DL manuals
  2. North Star
  3. Paint Sprayer
  4. M282737F
  5. Owner's Manual

North Star M282737F Owner's Manual

Manual is about: Tow Behind Sprayer

Summary of M282737F

  • Page 1

    ® m282737k owner’s manual instructions for assembly, testing, operation, servicing, and storage tow behind sprayer: for outdoor use with agricultural pesticides and other liquids** warning read and understand the owner’s manual completely before using this sprayer. Assemble, test, and use only in ac...

  • Page 2

    Hazard signal word definitions 2.

  • Page 3: Table Of Contents

    Table of contents 3 intended use ............................................................................................................................................................... 4 summary of important safety information ....................................................................

  • Page 4: Intended Use

    Intended use 4 the sprayer is intended for use in spraying agricultural pesticides and other non- flammable liquids. Spraying pesticides: pesticides are hazardous chemicals that must be handled with caution as directed throughout this manual and on the pesticide label. Pesticides are regulated by th...

  • Page 5

    Summary of important safety information 5 warning read and understand this owner’s manual completely before using the sprayer. Read each chemical label’s instructions before handling the chemical. Improper use of the sprayer or handling of chemicals could result in serious injury or illness for the ...

  • Page 6

    Summary of important safety information (continued) 6 turn off vehicle and set brake or block wheels, turn off power to sprayer, and relieve system pressure before leaving sprayer unattended. See troubleshooting section of this manual before attempting any repairs. Wear personal protective equipment...

  • Page 7: Warning Label Location

    Warning label location 7 call 1-800-270-0810 to order new label. Order part no. 777499 for chemical label. Warning read and understand the owner’s manual completely before using this sprayer. Assemble, test, and use only in accordance with the owner’s manual instructions. Read and follow chemical la...

  • Page 8: Unpacking

    Unpacking 8 closely inspect all contents in the shipping carton. Note that some parts are shipped inside the tank. If you have damaged components: contact the freight company that delivered the unit and file a claim. If you have missing components: contact northstar product support at 1-800-270-0810...

  • Page 9: Unpacking The Manual Bag

    Unpacking the manual bag 9 the following items are found in the manual bag. Drain cap rubber washer gun clip large gun clip hose guide 5/16 x ¾” carr. Bolt (4) 5/16 x ½” flange bolt (1) 5/16 flange nut (4) #10 x ¼” screw (2) hose clamp (4) wheel retainer (2) 5/16 flat washer (4) pressure gauge posit...

  • Page 10: Assembly

    Assembly 10 step one: attach the tongue to the cart base fasten with (2) 5/16 x ¾” carriage bolts and (2) 5/16 flange nuts. Tighten to 20 ft-lbs. Step two: attach the hitch mount to the tongue fasten with (2) 5/16 x ¾” carriage bolts and (2) 5/16 flange nuts. Tighten to 20 ft-lbs. Step three: attach...

  • Page 11: Assembly (Continued)

    Assembly (continued) 11 step four: attach wheels to cart base 1. Slide axle into holes on bottom of cart. 2. Slide tires and wheel retainers onto the axle. 3. Tighten wheel retainers with supplied hex wrench. Step five: attach pressure gauge 1. Remove and discard the plug in the gauge port. 2. Threa...

  • Page 12: Assembly (Continued)

    Assembly (continued) 12 step seven: attach gun clips to tank fasten one gun clip and one large gun clip to the sprayer tank with (2) #10 x 1/4” screws. Step eight: attach drain cap to tank press the rubber washer into the drain cap, then thread the drain cap onto the tank. Step nine: attach hose gui...

  • Page 13: Assembly (Continued)

    Assembly (continued) 13 step ten: attach sprayer to vehicle secure the sprayer to the tow vehicle with a hitch pin (not included, call 800.270.0810 and order item# 2501946). Step eleven: connect power cords to vehicle battery warning batteries are hazardous because they contain caustic acid, can emi...

  • Page 14: Assembly (Continued)

    Assembly (continued) 14 battery power cord pump power cord remote switch power cord hoop prongs strip ½” red wire handle shield battery power cord pump power cord 2. Identify sprayer’s power cords identify the power cords shipped with the sprayer. There are three power cords for the sprayer that you...

  • Page 15: Assembly (Continued)

    Assembly (continued) 15 5. Connect power cord to battery connect the sprayer’s battery power cord to the vehicle battery using the following procedure: a) disconnect the vehicle battery ground wire. B) connect the remote switch’s redbattery clamp or red wire connector to the positive (+) terminal of...

  • Page 16: Assembly (Continued)

    Assembly (continued) 16 10. To disconnect permanently when it is necessary to disconnect the sprayer’s battery power cord from the battery, use the following procedure: 1. Disconnect sprayer’s remote switch power cord from the battery power cord. 2. Disconnect the battery power cord from the vehicle...

  • Page 17: Machine Components

    Machine components 17 02630 1.) remote switch. The remote switch allows the operator to safely turn on/off the sprayer. 2.) hitch mount. The hitch mount connects the vehicle hitch to the sprayer. 3.) pump power cord. The pump power cord connects the remote switch to the pump. 4.) gun hose. The 420” ...

  • Page 18

    Operation – important safety information 18 now that you have completed and tested your assembly, there is some important safety and health information you need to know with regard to handling and spraying chemicals, as well as vehicle handling with the sprayer attached. Warning carefully read and m...

  • Page 19

    Operation – important safety information (continued) 19 chemical application safety: warning caution must be used when spraying chemicals to avoid unsafe exposure to humans and the environment . Heed the warnings below and follow all instructions carefully. Before spraying sprayer prep. Always inspe...

  • Page 20

    Operation – important safety information (continued) 20 towing safety: warning the filled sprayer is very heavy. It can crush and cause serious injury if it rolls out of control or tips over. Follow the instructions below for safely towing the sprayer. Read vehicle instructions. Review towing safety...

  • Page 21

    Operation – important safety information (continued) 21 bodily chemical contact personal contamination can occur when chemicals splash, spill, or spray directly onto a person. 1. Follow the emergency first aid instructions on the chemical label listed in the “first aid” or “statements of practical t...

  • Page 22

    Operation – preparing the sprayer for each use 22 fill cap suction strainer (inside tank) if the sprayer has been used previously, it must be prepared before each subsequent use. Warning read instructions below carefully for inspecting and preparing the sprayer. Damaged or clogged equipment could re...

  • Page 23

    Operation – using the sprayer 23 step one: assess wind conditions and clear work area. Before you decide to spray, you must determine whether wind conditions are suitable. You must also restrict access to the work area to ensure the safety of bystanders. Warning do not spray if wind speeds are great...

  • Page 24

    Operation - using the sprayer (continued) 24 fill cap step two: fill the sprayer. Warning always wear personal protective equipment as directed on the chemical label when handling pesticides. Long pants and sleeves, chemical resistant gloves, and eye protection are strongly recommended. Additional p...

  • Page 25

    Operation - using the sprayer (continued) 25 drain cap 7. Check drain cap before filling tank, ensure drain cap is securely tightened. 8. Fill tank add pesticide to tank through fill cap: a) confirm the chemical/water dilution ratios specified on the chemical label. B) determine chemical and water v...

  • Page 26

    Operation - using the sprayer (continued) 26 01542 priming valve lever priming hose 01542 priming valve step three: operate the sprayer. Warning always wear personal protective equipment as directed on the chemical label when spraying. Long pants and sleeves, chemical-resistant gloves, and eye prote...

  • Page 27

    Operation - using the sprayer (continued) 27 6. Operate spray gun (as needed for application) proper operation of the spray gun cone and stream spray pattern instructions 1. Squeeze the trigger to begin spraying. 2. With choke pulled back, rotate spray pattern selector knob to change between cone an...

  • Page 28

    Operation - using the sprayer (continued) 28 01542 priming valve pressure adjustment knob 7. Adjust pressure and agitation as needed -rotate the pressure adjustment knob until the sprayer is running at the desired pressure. -open priming valve to circulate flow back to the tank and create agitation....

  • Page 29

    Operation - using the sprayer (continued) 29 step four: clean sprayer and decontaminate after use. When done using the sprayer, it is important to clean the sprayer and decontaminate yourself. Do not store the sprayer with chemicals in the tank, as it is unsafe and could also result in damage to the...

  • Page 30: Storage

    Storage 30 prepare the sprayer for end-of-season storage by running rv antifreeze through the system. This will keep internal parts lubricated, protect against corrosion, and keep the unit from freezing. Caution the sprayer will be damaged if it freezes. Protect the sprayer from freezing during stor...

  • Page 31: Troubleshooting

    Troubleshooting 31 warning before troubleshooting or attempting to service, read the following safety rules to avoid accidental exposure to chemical and also risk of electric shock. Note: a reserve, clean container capable of holding at least 16 gallons should be kept for use when the sprayer tank n...

  • Page 32: Specifications

    Specifications 32 electrical system requirements electrical connection………………. 12 vdc amp draw from pump……………... 15.0 amps sprayer specifications maximum gpm……………………. 2.0 gpm continuous pressure……………….. 200 psi pressure adjustment……………….. 0-200 psi tank maximum capacity………….. 16 gallons overall dimen...

  • Page 33

    Exploded view – 282737 – rev. K 33 item part# description qty item part# description qty 1 781088 spray gun 1 21 5250 switch 1 2 30746 hose clamp 10 22 5253 insulated female spade 2 3 30290 420” gun hose 1 23 37694 remote switch 2-way connector 1 4 35118 pressure gauge 1 24 37693 2-way connector 1 5...

  • Page 34

    34 this page has intentionally been left blank..

  • Page 35: Limited Warranty

    Limited warranty 35 dear valued customer: the northstar product you just purchased is built with the finest material and craftsmanship. Use this product properly and enjoy the benefits from its high performance. By purchasing a northstar product, you show a desire for quality and durability. Like al...

  • Page 36

    36 ® manufactured by northern tool + equipment co., 2800 southcross drive west p.O. Box 1499 burnsville, mn 55337-0499.