North Star SAPPHIRE Operating Manual

Manual is about: 192kHz/24bit

Summary of SAPPHIRE

  • Page 1

    Sapphire cd player 192/24 operating manual north star design ® sapphire 192khz/24bit cd player.

  • Page 2

    Rev. 1.0 december 06.

  • Page 3

    Warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may...

  • Page 4

    Important safety instructions please read all instructions and precautions carefully and completely before operating your north star design ® sapphire cd player. 1. Always disconnect your entire system from the ac mains before connecting or disconnecting any cables, or when cleaning any component. 2...

  • Page 5

    Introduction welcome to the north star design “family” and congratulations on your purchase of our new cd player sapphire. With its combination of features, precision electronic circuitry and accurately machined chassis components throughout, your sapphire cd player will offer you many years of musi...

  • Page 6

    Front & rear panel function controls before attempting any system interconnection, please familiarize yourself with the front and rear panel controls of the sapphire cd player. The descriptions below refer to the numbers and letters associated with the features in the diagram above. Front panel 1 st...

  • Page 7

    6 remote sensor receiver 7 operate led indicator the operate led show the operating mode of your cd player: glows blue when the cd player is in operation mode. Off the cd player is in stand-by. 8 stand-by led indicator the stand-by led show the operating mode of your cd player: glows red when the cd...

  • Page 8

    18 balanced analogue output use this output to connect the cd player to the input of a preamplifier or integrated amplifier using interconnect provided with xlr connectors (not shipped with the equipment). Danger! Potentially dangerous voltages and current capabilities exist within the sapphire cd p...

  • Page 9

    1 . Stby standby on/off 2 . Disc open/close. 3 . Scan play 10 seconds of each track. 4 . Prog a. Set the cd player in stop mode. B. Select tracks with the numeric buttons, or step to the number using buttons > or and c until all the tracks you wish to program is done. After each track is programmed,...

  • Page 10

    Notes n o r t h s t a r d e s i g n north star design s.R.L. Via lenin, 132 56010 s.Martino ulmiano (pi) italy phone: +39-050-859945 fax: +39-050-859166 e-mail: info@northstar.It web: www.Northstar.It.