1. DL manuals
  2. Northern Industrial
  3. Welding System
  4. ARC 200
  5. Operator's Manual

Northern Industrial ARC 200 Operator's Manual

Summary of ARC 200

  • Page 1

    +vgo 09 12'4#614ŏ5/#07#. 4gcfectghwnn[cpfwpfgtuvcpf47.'5(145#('12'4#6+10cpfkpuvtwevkqpudghqtg qrgtcvkpi(cknwtgvqhqnnqyvjguchgv[twngucpfqvjgtdcukeuchgv[rtgecwvkqpuoc[ tguwnvkpugtkqwurgtuqpcnkplwt[ 9gnfgt/cpwcn%qxgtkpff 9gnfgt/cpwcn%qxgtkpff 2/ 2/ $ 5 &.

  • Page 2

    #4% +vgo 09 1rgtcvkqp+puvtwevkqpu (qtvgejpkecnswguvkqpucpftgrncegogpvrctvurngcugecnn 6jcpm[qwxgt[owejhqtejqqukpic0146*'40611. '37+2/'06%1rtqfwev(qt hwvwtgtghgtgpegrngcugeqorngvgvjgqypgtŏutgeqtfdgnqy /qfgnaaaaaaaaaaaaaaaa2wtejcug&cvgaaaaaaaaaaaaaaaaaaa 5cxgvjgtgegkrvycttcpv[kphqtocvkqpcpfvjkuqypgtŏuo...

  • Page 3: 200Amp Ac Stick Welder

    Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property....

  • Page 4

    2 arc 200 northern industrial welder operating instructions and parts manual know your welder current adjustment welding cable and electrode holder indicator lights on/off switch ground cable and clamp on/off switch in the “off” position no power is being supplied to the electrode holder. In the “on...

  • Page 5

    3 arc 200 northern industrial welder operating instructions and parts manual general safety information 1.1 your welding environment -keep the environment you will be welding in free from flammable materials. -always keep a fire extinguisher accessible to your welding environment. -always have a qua...

  • Page 6

    4 arc 200 northern industrial welder operating instructions and parts manual can cause fatal shocks and severe burns. While welding, all metal components connected to the wire are electrically hot. Poor ground connections are a hazard, so secure the ground lead before welding. -wear dry protective a...

  • Page 7

    5 arc 200 northern industrial welder operating instructions and parts manual -do not operate any electric arc welder in areas where flammable or explosive materials are present. -remove all flammable materials within 35 feet of the welding arc. If removal is not possible, tightly cover them with fir...

  • Page 8

    6 arc 200 northern industrial welder operating instructions and parts manual - do not touch or handle pc board without being properly grounded with a wrist strap. Put pc board in static proof bag to move or ship. - do not put hands or fingers near moving parts such as drive rolls or fan assembly 1. ...

  • Page 9

    7 arc 200 northern industrial welder operating instructions and parts manual installation 1. Power requirement ac single phase 230v, 60hz with a 50 amp circuit breaker. Do not operate this unit if the actual power source voltage is less than 207 volts ac or greater than 253 volts ac. • high voltage ...

  • Page 10

    8 arc 200 northern industrial welder operating instructions and parts manual the welding electrode is a rod coated with a layer of flux. When welding, electrical current flows between the electrode (rod) and the grounded metal work piece. The intense heat of the arc between the rod and the grounded ...

  • Page 11

    9 arc 200 northern industrial welder operating instructions and parts manual the best way to teach yourself how to weld is with short periods of practice at regular intervals. All practice welds should be done on scrap metal that can be discarded. Do not attempt to make any repairs on valuable equip...

  • Page 12

    10 arc 200 northern industrial welder operating instructions and parts manual from side to side while moving with the torch. It is best to hesitate momentarily at each side before weaving back the other way penetration. 2.4 welding position flat position it is easiest of the welding positions and is...

  • Page 13

    11 northern industrial welder operating instructions and parts manual arc 200 • wear goggles or eye glasses with side shields and protect the hands and other exposed parts of the body with protective garments, or if possible, work with a shield between the body and the work piece. The intense heat p...

  • Page 14

    12 arc 200 northern industrial welder operating instructions and parts manual circuit chart.

  • Page 15

    13 arc 200 northern industrial welder operating instructions and parts manual trouble shooting chart symptom (s) possible causes(s) corrective action(s) welder does not work when the turn on the main switch 1.No power input 2.The power cord or power plug is broken 3.Main switch is broken 4.Transform...

  • Page 16

    14 arc 200 northern industrial welder operating instructions and parts manual.

  • Page 17

    15 northern industrial welder operating instructions and parts manual arc 200 repair parts list reference number description part number qty 1 handle 1.06.201.03 1 2 panel 1.06.201.01 1 3 spring 2.06.29.051 2 4 transformer 1.06.201.31 1 5 cable holder 2.05.05.201 1 6 power cord 2.03.05.148 1 7 spind...

  • Page 18

    16 northern industrial welder operating instructions and parts manual arc 200 other safety and standards information this manual is designed to inform the operator of safety and general use of this model only. For further information about welding safety refer to the following standards and comply w...

  • Page 19: Warranty

    Warranty northern tool + equipment effective jan 1, 20 10 limited warranty this warranty applies to the original purchaser and is subject to the terms and conditions listed below. This limited warranty is for new equipment sold after the above date, providing coverage for defects in material and wor...

  • Page 20

    Northern tool + equipment co. 2800 southcross drive west po box 1219 burnsville mn 55337 weldermanualcover.Indd 4 weldermanualcover.Indd 4 12/28/06 1:45:49 pm 12/28/06 1:45:49 pm.