Northern Industrial Power Booster Owner's Manual

Summary of Power Booster

  • Page 1

    Item# 16762 on/off switch completely portable, safe & convenient owner's manual this manual contains important information regarding safety, operation, maintenance and storage of this product. Please read this instruction manual carefully before using this product to avoid possible injury or propert...

  • Page 2

    1 12 10 2 4 11 9 1 6 5 3 8 7 13 on/off switch figure 1. Front view showing control pane l 1. 12 volt output socket with overload 7. 110 volt ac adapter/charger cord protection 8. Dc/dc power cord/charger 2. Color-coded battery meter 9. Emergency light switch 3. Heavy-duty 400 amp booster clamps 10. ...

  • Page 3

    . Allows 12v dc appliances to be used in remote sites and/or in emergencies when commercial power is not available. . Solid-state, automatic operation and circuit protection. . Requires no maintenance for optimum operation. . Sealed, maintenance-free, heavy-duty battery is safe to use and transport....

  • Page 4

    3 warning always wear eye protection when working on or around lead-acid batteries. If splashed with battery acid: immediately wash effected area such as face and particularly the eyes with clean water. Continue washing area, face and eyes until medical help arrives. Cautions 1. To avoid possible da...

  • Page 5

    Recommendations for getting the most from your new power booster: recharging 1. For maximum battery life, we recommend that your power booster be kept fully charged at all times. If the battery is allowed to remain in a discharged state, battery life may be shortened. Table i shows the relationship ...

  • Page 6

    5 10 optional equipment- 300w power inverter the power inverter easily attaches to the rear of the power boost and just as easily detaches from it. 1. How your 300w power inverter works the power inverter is an electronic device that converts low voltage dc (direct current) electricity from a batter...

  • Page 7

    We recommend that you use the 12v dc recharging procedure only when it is necessary as continued use of the 12v dc recharging procedure may shorten the system's life. To use the 12v dc recharging system : 1. Insert the power cord with the 12v dc cigarette lighter plug into the 12v dc cigarette light...

  • Page 8

    8 1. Unscrew and remove the eight (8) ''phillips'' (cross-head) screws that hold the 8.25-inch (20.8- centimeter) wide by 10.75-inch (27.8-centimeters) high rectangular cover plate in place on the back of your power booster. 2. Lift off the cover plate to expose the battery compartment. 3. Unscrew t...