It is user’s responsibility to communicate proper information on the safe use and good operation of this machine..
The purpose of this user ’s instruction manual is to provide safety information and operating instructions in order to protect the users from exposed danger. For your own safety, please read the safety instructions and operating instructions described in this manual thoroughly before use. The inform...
1. Safety information trowels are only allowed to be operated under the intended conditions of floating, finishing and combining the surface of concrete. It is prohibited to use it for any other purpose. Although the product is designed with special attention to the safety, it still is the user ’s r...
- are assessed to be able to carry out their duties reliably. 2) people are not allowed to enter into the danger zone of the trowel. 3) the operator has to monitor the danger zone all the time. It is not allowed to operate if there is a person in the danger zone. 4) operate the trowel away from othe...
4. Safety label locations 5. Specifications 5-1 specifications ** ce certified product only power trowel model tmt – 24 tmt-36 weight 47 kg 80 kg out dimension (l x w x h) 1,630 x630 x 980 1,890 x 960 x 1,040 working blade diameter 610 m/m (24 ”) 914 mm (36 ”) rpm of blade 60-100 rpm 70-110 rpm engi...
5-2 major external dimension 5-3 outline configuration 6. Engine 6-1 recommended fuel 1) the trowel engine requires regular unleaded gasoline. Use only fresh, clean fuel. Fuel containing water or dirt will damage the fuel system. Consult engine owner ’s manual for complete fuel specifications. 6-2 b...
6-4 stopping the engine 1) reduce the engine rpm to idle by moving throttle completely to the right. 2) press stop button until engine stops completely. 3) close the fuel valve. Please see the instruction manual of engine for further detailed information. 7. Operation all safety instructions must be...
Caution ** if the engine has been running hard, do not stop it abruptly from the full load. ** cut down the speed (load) and allow the engine to run idle for a few minutes. 8. Transportation 1) transport the trowel by vehicle or lift crane after securely fasten with rope or chain on the motor vehicl...
10. Periodic maintenance schedule ** the following chart is based on the normal operation schedule. 1. Dust off the engine and the body of the trowel to clean after each use. 2. Cover up with dry cloth completely for storage. 3. Carry the periodic inspection. Caution the engine switch must be turned...
11. Troubleshooting please check the list below before addressing the problems to servicing personnel including local dealer. And if the problem continues after the troubleshooting as described below, call your local dealer for future assistance. Failure possible cause remedial measure trowel does n...
13. Warranty periods 1) warranty policy for the products shown in the following table. 2) northern industrial shall supply all necessary parts for the replacement or repair at free of charge, when defects shall be proved that main problems are derived from mill defect by 3rd party inspection company...
