Air tools made in china read carefully and understand rules for safe operation and instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 1981202 1/2" black nickel air impact wrench user's manual.
For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a northern tool + equipment co., product! For future reference, please complete the owner's record below: model: _______________ purchase date: _______________ save the receipt, warranty and t...
3. Avoid accidental starting. Be sure the trigger is off before connecting to the air supply. Carrying pneumatic tools with your finger on the trigger, or connecting pneumatic tools to the air supply with the trigger on, invites accidents. 4. Remove adjusting keys or wrenches before turning on the t...
5. The warnings, precautions, and instructions discussed in this manual can not cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Assembly ...
Note: Øif the tool stalls while tightening, do not raise the outlet pressure of the air compressor above 90 psi. Øwhen the nut has been tightened, remove the tool and socket. Do not over-tighten. Øif available, check the recommended torque specifications for the nut. You should use a torque wrench t...
Diagram 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 cylinder rotor rotor blade front end blade front dowel pin rear end plate rear dowel pin rear gasket back cover spring washer cap screw stop pin spring pin set screw exhaust deflect tapping screw plug nose rubber protect ring o-ring...
