Lprcam license plate capture bullet camera rev. 081814 3625 cincinnati avenue, rocklin, ca 95765 ♦ 855-388-7422 ♦ www.Northernvideo.Com note: for license plate capture only. This technology will not take pictures of surrounding areas. User guide.
Table of contents 2 1. Notice of use 3 2. Product overview 4 2.1 camera parts definition 6 2.2 specification 7 3. Mounting specification & installation instruction 8 3.1 package content 8 3.2 mounting specification 8 3.3 camera installation 9.
1. Notice of use follow all instructions. All requirements should be followed before using this camera. The manufacturer is not responsible for any technical or typographical errors. Keep this document for future reference. Install it with applicable outdoor housing and accessories. Please make sure...
2. Product overview this high-performance plate-capture camera is equipped with a 1/3” sony ccd. The plate-capture camera’s outstanding feature set ensures seamless integration and enhanced performance when used in conjunction with external license plate recognition (lpr) software. Outfitted with po...
Dimensions 5.
2.1 camera parts definition power connector extendable sunshield rain guard mount adjustment bnc connector tele/wide adjustment screw far/near adjustment screw rain guard/extendable sunshield: minimize the effects of rain and sunlight on image quality. Tele/wide and far/near adjustment screws: lens ...
2.2 specification image system signal system ntsc pal image sensor 1/3" sony ccd effective pixels(hxv) 768 x 494 752 x 582 electric 2:1 interlace v: 59.94hz, 2:1 interlace v: 50hz, scanning system h: 15.734khz h: 15.625khz sync system internal horizontal resolution 600 tv lines f=9mm ~ 22mm, f1.4 dc...
3. Mounting specification & installation instruction please follow the mounting specification to install the plate-capture camera. 3.1 package content item description plate-capture camera assembly camera rubber pad static electricity protection 3 insulation tubes static electricity protection guide...
6. Suggest the horizontal angle is less than 40 degree. This camera is designed to cover only one lane (less than 3 meters). 7. If connected to a dvr, make sure your dvr has the de-interlace feature and the frame rate is above 15 fps for optimal effect. 8. To ensure an optimal view, please install t...
2. Loosen the right screw 3. Rotate the mount adjustment 1. Loosen the left screw 3. Install the camera : use an appropriate tool to install 3 self-tapping screws to fasten the camera. For static electricity protection, please use the rubber pad to cover the metal mount adjustment and put 3 insulati...
4. Adjust the lens : loosen the screws and make the far/near and tele/wide adjustments. After adjustments, make sure to tighten the screws to keep the camera waterproof. It’s suggested to manually tighten the screws. If using an electric screwdriver, a torque of 5~8 kgf-cm is suggested. Warning: ple...
