Northern Telecom CTA 150i Installation Manual - Norstar Tapi Sp Installation

Norstar TAPI SP installation  

9

Computer Telephony Adapter 150 Installation Guide

Norstar TAPI SP installation

Norstar TAPI SP software installation

This section describes the procedures that must be performed to install the 

Norstar TAPI SP.

Pre-installation checklist

Before installing the software, complete the following pre-installation 

checklist.

1.

Verify that your PC meets the minimum hardware and software 

requirements. Verify that the interface device is connected and that the 

telephone connected to the interface device is operational. Make sure 

that the telephone has at least one DN key to support dialing and 

answering calls from the TAPI application.

2.

Ensure that a previous version of the Norstar TAPI Service Provider is 

not running, by following these steps:

a)

Locate the Control Panel icon as follows:

(Windows 3.1)  

Double-click the 

Main

 program group in the 

Program Manager.

The

Main

 group displays.

(Windows 95)  

Double-click the 

My Computer

 icon.

The

My Computer

 group displays.

b)

Double-click the 

Control Panel

 icon.

The 

Control Panel

 window displays the 

Telephony

 icon.

c)

Double-click the 

Telephony

 icon, if it appears. (If it does not 

appear, the Norstar TAPI Service Provider is not running.)

(Windows 3.1)

  The 

Telephony

 dialog box displays.

(Windows 95)

  The 

Telephony Properties

 dialog box displays.

d)

(Windows 3.1)

  Click 

Driver Setup

.

The 

Telephony Drivers

 dialog box displays. If there is a Norstar 

Telephony SP entry, click 

Remove

 to uninstall it. Restart the PC 

before proceeding with the installation.

(Windows 95)

  If there is a Norstar Telephony SP entry, click 

Remove

 to uninstall it. Restart the PC before proceeding with the 

installation.