Northern TVID212IR Manual

Manual is about: HD-TVI, Full HD 1080p Indoor IR Dome Camera

Summary of TVID212IR

  • Page 1

    Tvid212ir rev. 062015 hd-tvi, full hd 1080p indoor ir dome camera user guide: tvid212ir 3625 cincinnati avenue, rocklin, ca 95765 ♦ 888-874-3336 ♦ www.Northernvideo.Com 855-388-7422 shown with snap-on cover..

  • Page 3: Caution

    Safety information caution risk of electric shock. Do not open caution : to reduce the risk of electric shock, do not remove cover (or back) no user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates that dangerous voltage consisting a risk of electric sh...

  • Page 4

    Precautions choose an ideal location for the camera, location must be protected against moisture and vibration. Be careful not to scratch the camera unit, especially lens or dome cover. Indoor only design, do not install outdoors. Use the camera within the temperature (14 ˚ f ~ 122 ˚ f). Handle with...

  • Page 5

    Features sony 1/2.9" cmos sensor. Full hd-tvi(1920x1080) resolution. Digital-wdr, 3d-dnr. Day & night function. Full osd with multi-language. Multi function : sense up(x2~x8), motion detection, privacy mask, mirror(h/v/r), d-zoom. 25m range visible in total darkness with 24pcs of ir leds. 3-axis bra...

  • Page 7: Dimensions

    Dimensions mechanical dimension Ø130.8 x 101(h)mm weight approx. 500g environment construction plastic ingress protection indoor only operating temp 14°f ~ 122°f humidity 0% to 90% electrical (power consumption) power supply regulated 12v dc ±10% 12v dc / 24v ac dual voltage current consumption max....

  • Page 8: Installation

    Installation how to install 1. Opening the dome : push in the latch button. (remove the protection sheet after installing.) 2. Removing the dome : lift the dome. When you push the latch button, it is unlocked and you can lift the dome. To switch to white housing, gently push the bubble through the b...

  • Page 9: Installation

    Installation 3. Camera installation (1) fix the camera set with the supplied screws on ceiling or wall mount. If you don't use supplied screws, the camera may fall off. (2) please refer to '4. Camera angle adjustment' regarding adjust camera angle. (3) lens adjustment ① by turning the "tele-wide" kn...

  • Page 10: Assembly

    Assembly assembly mounting scerw tp1 screw tp1 3.5x20 2ea >t n u o m ll a w screw tp1 3.5x20 2ea scerw tp1 3.5x20 2ea >t n u o m ll a w scerw tp1 3.5x20 2ea scerw tp1 3.5x20 2ea take off the marked part by using nipper for lpacing cable out. Sk -d3 00(ir) dome cover a ss ’y sk -d3 00(ir) camera modu...

  • Page 11: Connection

    Connection ac 24v / dc 12v video terminal dome camera

  • Page 12

    Osd menu set up • main set up exposure lens / brightness / mode / shutter / agc / sens-up white balance auto / auto ext / manual backlight blc / hlc / off day&night auto_cds / color / bw image dnr / sharpness / color gain / gamma / d-wdr / defog / shading / mirror special title / privacy / motion / ...

  • Page 13

    Osd menu set up osd menu control and set up the on-screen menu is operated with the control lever on the pcb. To call the on-screen menu, press the control lever straight downward. The main menu is displayed as follows. Select the menu item by tilting the control lever in direction ↑ or ↓ . Change a...

  • Page 14

    Menu set up exposure function of adjusting shutter speed and agc lens : set to dc / dc auto-iris lens is standard. Brightness : adjust brightness level 0(dark) ~ 20(bright) mode : select ae mode. Indoor / outdoor /deblur shutter : can be set in auto or manual auto : auto shutter mode manual : adjust...

  • Page 15

    Menu set up function of adjusting white balance auto : automatically adjusts color according to the lighting autoext : faster extension version of auto manual : manual white balance kelvin : low / middle /high r-gain : 0~20 b-gain : 0~20 dome camera

  • Page 16

    Menu set up backlight strong/large sources of light coming from behind the main subject (such as a person indoors that is in front of a window) cause the light meter to underexpose for the main subject. Hlc : high light compensation / masking the highlight in the image to distinguish the subject. Bl...

  • Page 17

    Menu set up day & night switching of day operation/ night operation auto : automatic switching between day operation (color mode) and night operation (black and-white mode) depending on the ambient brigh tness - ir led : ir led on/off setting - anti-sat. : compensate when ir hunting happens. When yo...

  • Page 18: Image

    Menu set up dnr(3d-dnr) : select digital noise reduction (off / low /middle / high) sharpness : adjust sharpness level (0 ~ 10) color gain : adjust color gain value (0 ~ 20) gamma : selecte gamma mode. (0.45~0.65) d-wdr : select digital wdr(wide dynamic range) (off / low /middle / high) defog : adju...

  • Page 19

    Menu set up title : camera title edit and display on / off select. Privacy : hide an area you want to hide on the screen.(16 point) motion : when there is movement of the subject on the screen, there will be motion detection. D-zoom : select digital zoom magnification. Max 8x language : select langu...

  • Page 21

    Menu set up all the settings will be restored to the factory default escape the menu dome camera

  • Page 22: Tvid212Ir

    Specification tvid212ir video image sensor 1/2.9" sony cmos total pixels 2010(h) 1108(v) = 2,227,080 (pixel) active pixels 1944(h) 1092(v) = 2,122,848 (pixel) scanning system progressive scan resolution digital : 1920x1080p (1080p, 30/25fps) 1280x720p (720p, 60/50fps) analog : 700tvl s/n more than 5...

  • Page 23: Nothing Appears On Screen.

    Troubleshooting nothing appears on screen. The screen seems blurry and darker. The image focus is not correct. Check if the camera and monitor’s powers are on. (also, the voltage and polarity.) check if the video-out terminal of the camera and the video-in terminal of the monitor are correctly conne...

  • Page 25

    Memo dome camera