Northwestern Bell Big Button Plus 20270 Owner's Manual - page 11
010508A-1 10
Automatic Call Back
Allows you to automatically dial the
number of the person who has called
previously, provided that Caller ID
information has been recorded.
1. Select the caller you want to call
back by pressing the Review UP or
Review DOWN button.
2. When the call record is displayed
during review lift the handset or
press the SPEAKERPHONE button.
Press the call back button. The
phone
number displayed on the
LCD will be dialed automatically.
The LCD panel will show the IN
USE icon "
” and the talking
timer starts to count in 5 seconds.
NOTES:
• The Call Back feature will not dial
the phone number if the selected
Call Record phone number is
blocked or if it is not available.
OPTION Button
Each press of this button will change the
format of display as follow.
7 – digit --- 7digit phone number
10 – digit – 3 digit area code + 7 digit
phone number
11 – digit – long distance code “1” + 3
digit area code + 7 digit
phone number.
Erasing A Single Call Record
1.
Press either the Review UP or
DOWN button to display the call
record to be erased.
2.
Press quickly the DELETE button
twice. The display will show the
next caller ID record, after you have
deleted the call record.
NOTE: A call record cannot be
retrieved once it has been deleted.
Erasing All Call Records
1.
Press either the Review UP or
DOWN button once to enter the call
history list and to review all call
records.
2.
While the last call record is
displayed. Press and hold the
DELETE button for at least five (5)
seconds until the LCD display
shows “NO CALL”.
LCD Panel Display Messages
Different messages are displayed on the
LCD panel to indicate the status of the
Caller ID.
TOTAL XX NEW XX
• While the caller ID is in standby
mode, it shows the count for the
total number of calls and new calls
received.
BLOCKED CALL
• In some areas, caller may be able to
block their name and phone number
from appearing on the Caller ID of
the receiving party. The LCD panel
will display “BLOCKED CALL”
on the last line of the LCD panel.
OUT OF AREA
• This is a call from an area where
Caller ID service is not yet offered
or an area that is not yet providing
Caller ID delivery via the long
distance network. The LCD panel
will display the “OUT OF AREA”
on the last line of the panel.
NEW CALL INDICATION
• If you have new calls to be
reviewed, the MESSAGE/New Call
LED Indicator on the unit will blink
and “NEW” will momentarily
appear on the upper right hand
corner of the panel. Once you have
reviewed all new call records and
message waiting messages,
MESSAGE/NEW CALL LED
indicator will turn off and the new
call counter will reset to "00".
$$TOLL ICON
• Appears on the upper left side of the
LCD screen when the incoming call