— 2 — norton clipper troubleshooting manual cp512-300i & cp514-350i high-speed gas saws all the muscle you need™.
— 1 — this manual is intended as a guide for the service center. The details and functional descriptions will assist with any possible repairs to the norton clipper high-speed gas saws cp512-300i or cp514-350i ilube®. We recommend that only norton clipper – original parts are used for all repairs. T...
— 2 — chapter 1 check of oil level and associated components before testing any of the electrical components, check the oil tank, oil pick-up filter and the oil pick-up hose. We recommend starting by checking the oil pick-up filter for obstructions then, test the oil pick-up hose for leaks. Replace ...
— 3 — chapter 4 testing the generator g1 and fault finding to test the condition of the generator g1 as a possible fault source, proceed as follows: 1. Disconnect the push-plug connection (x13/x23 and x14/x24) and test the two yellow cables on the plug x23/x24 with the multi-meter for resistance. Re...
— 4 — chapter 8 testing of the oil pump electronic a2 the connection x15/x25 is separated for this test. Connect the test probes with plug x15. The polarity is not important at this point. If there is a voltage increase of +18v or -18v = dc for the short time pulse of 0.16 sec. At plug x15, the oil ...
— 5 — cp512-300i & cp514-350i high-speed gas saws trouble shooting manual.
— 6 — cp512-300i & cp514-350i high-speed gas saws trouble shooting manual.
— 7 — cp512-300i & cp514-350i high-speed gas saws trouble shooting manual.
— 1 — usa customer service: phone toll free: 1 800 554-8003 fax toll free: 1 800 443-1092 canada customer service: phone toll free: 1 800 263-6565 fax toll free: 1 800 561-9490 form #8393 © saint-gobain abrasives, inc. April 2013 norton, clipper, and ilube are registered trademarks of saint-gobain a...
