Summary of NB.Z2000
Page 1
Operating manual.
Page 2
Nb.Z2000 am proadcast exciter developed and manufactured in the eu. By norton broadcast victor hugo 7 trikala 42100 greece tel. 2431037717 www.Nbcast.Gr info@nbcast.Gr reading this user manual you must know the following: • it’s forbidden to use the transmitter beyond the frequency band 526.5- 1606....
Page 3
Significant notes and correct installation conditions important carefully read and save this manual, before you turn on the nb.Z2000 transmitter. This manual includes important safety instructions and operation for the transmitter. Precautions warning high voltage don’t touch ever the antenna or the...
Page 4
Notes about the placing when selecting the place of nb.Z2000 operation, we have in mind the general limitation about the environmental conditions as they describe to the specifications and precautions. Choose the place of the installation, so that all the connections of nb.Z2000 can be accessible at...
Page 5
Description of transmitter’s front panel description of transmitter’s back view.
Page 6
Installation and connection the nb.Z2000 at the back side of the unit has a female plug like cannon, with which connects the sound from the output of the console, or of one sound editor. The connection of the cannon’s pin becomes balance pin2+ pin 1- pin3 grounding. At the front side of the transmit...
Page 7
Connection ptt and connection of a distant standby. To the back side of the transmitter you can find the female 9pin plug to connect a button with which you could set the transmitter in standby condition and conversely if you connect an external button to pin 9-5. To pin 1-2 when the transmitter is ...
Page 8
Function description of the transmitter the nb.Z2000 is a dds exciter with modulation am, high power 100watt carrier (400watt p.E.P.) and programmed to send out from 500khz-2000khz. It is equipped with all the protections that it needs, so that the unit never be risk from a wrong manipulation or fro...
Page 9
Detailed description of the menu of the transmitter.
Page 10
First screen during startup of the transmitter: when the transmitter activated from the power button that there is at the right side of the front of the transmitter and before it starts to stopwatch conversely for 7 seconds, at this point the mechanicals of the transmitter gives the ability to the u...
Page 11
Importation to the menu this is the first screen of the transmitter which you will see if you press the big button at the front side of the transmitter. Up you can see the temperature of the transmitter and just below is the set frequency menu. At this menu you change the transmission’s frequency fr...
Page 12
Never adjust this protection under 40watt. The amplifier will destroy. Protection amplifier’s excessive temperature of the transmitter. It has adjust from the factory to 60 celsius degrees. You have the ability to adjust this protection to 1-100 celsius degrees. Never outdistance 70 degrees. If the ...
Page 13
The nb.Z2000 is programmed so every time any of the protections activates to try and do restart for three times, by timing conversely for 30 sec. If the transmitter doesn’t open in any of the three efforts (trys:1.2.3) the problem stay on and the transmitter will stay close. To open it you must push...
Page 14
Eu declaration of conformity manufacturer norton broadcasting kaperoni eleni victor hugo 7, trikala, 42100, greece product am broadcaster nb.Z2000 suitable antenna 50Ω european directives 2014/53/ΕΕ – radio equipment 2011/65/ΕΕ – rohs harmonized standards en 60215:1989+a1:1992 en 60065:2014 en 61000...