All products are trademarks of nostalgia products group, llc. Worldwide design & utility patented or patents pending. © 2009 nostalgia products group, llc. Www.Nostalgiaelectrics.Com (rev. 08/21/09).
Ccp-200 old-fashioned movie-time popcorn cart™ instructions and recipes (french) old-fashioned movie-time popcorn cart™ instructions et recettes (spanish) old-fashioned movie-time popcorn cart™ instrucciones y recetas.
English 1 contents important precautions . . . . . . . . . . . . . . . . . 2 important safeguards . . . . . . . . . . . . . . . . . . 2 introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 parts & assembly . . . . . . . . . . . . . . . . . . . . . . 4 how to operate . . . . . . . . . . . ....
English 2 important precautions never immerse in water. 1. Never use near water. 2. Never use an abrasive sponge nor cloth. 3. Never use a scouring pad on the appliance. 4. Never leave appliance unattended while in use. 5. Never force kettle in nor out of the brackets as this may cause gears 6. To b...
English 3 extreme caution must be used when moving this appliance. 11. Do not use the appliance for other than its intended use. 12. An appliance that is plugged into an outlet should 13. Not be left unattended while in operation. Check kettle for presence of foreign objects prior to use. 14. Make s...
English 4 parts & assembly hardware #1 screw (10mm) #2 bolt (10mm) #3 bolt (20mm) #4 stud (65mm) qty. 4 qty. 6 qty. 4 qty. 4 #5 flat washer #6 nut cap qty. 8 qty. 6.
English 5 assembly (a) main unit (b) kernel measuring (c) storage (d) oil measuring cup compartment spoon (e) push handle (f) axle rod (g) wheel (h) wrench (i) base support (j) bottom plate (k) cross bar (l) leg assembly (m) popcorn scoop.
English 6 assembly of base support push handle (e) attaches onto the storage 1. Compartment (c) using supplied #1 screws. Insert cross bar (k) into the square inserts on the inside of base support (i) 2. And secure from below with #2 bolts. Insert the leg assembly (l) over the protruding ends of the...
English 7 assembly of wheels insert axle rod (f) into base support (i). 1. Put on #5 flat washer. Slide wheel (g) into axle rod (f) 2. And add a second #5 flat washer. Use wrench (h) to tighten the #6 nut cup. 3. Add #5 flat washer, second wheel (g), another #5 flat washer, and #6 nut 4. Cap to the ...
English 8 how to operate before first use, clean the inside of the unit by wiping with a moist, non-abrasive sponge, towel or cloth and then wipe with a non- abrasive dry towel. Wipe down the inside of the kettle and be sure it is properly placed in the brackets before starting. First, find a flat s...
English 9 helpful tips smoking if your old fashioned movie time popcorn cart™ begins to smoke during cooking, it may be due to grease build up. In order to reduce smoking, make sure that you clean the inside of the kettle between uses. Cleaning & maintenance make sure appliance is unplugged before c...
English 10 returns & warranty should your unit not work or is damaged when you first take it out of the box, please return it to the place of purchase immediately. Old fashioned movie time popcorn cart™ / ccp-200 should you have any questions, please contact us via email or at the customer service n...
