Nostalgia Electrics SLUSHEASE HSM-245 User Manual

Summary of SLUSHEASE HSM-245

  • Page 1

    Nostalgia products group llc 1471 partnership dr. Green bay, wi 54304-5685 visit us online at www.Nostalgiaelectrics.Com ©2009 nostalgia products group llc rev. 6/23/09 t h e sl u s h eas e ™ hsm series for household use only hsm-245 hsm-250 hsm-250d hsm-cvs.

  • Page 2

    13 read these instructions before using this unit! Save these instructions 6/23/09 rev. 14 returns & warranty should your unit not work or is damaged when you first take it out of the box, please return it to the place of purchase immediately. Should you have any questions, please contact us via ema...

  • Page 3

    1 important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before operating this appliance. 2. Do not open the unit lid while unit is running. 3. Do not place hands or fingers inside fill plug hole wh...

  • Page 4

    3 important precautions a. Never immerse the main base unit in water. B. Never operate near water or hot temperatures. C. Never leave unattended while in use. D. Never try to force the locking mechanisms. E. Unplug unit from power outlet source when not in use and when cleaning. F. Do not put in dis...

  • Page 5

    5 before first use it is recommended that after unpacking your home slush-ease™ machine, you take the unit apart and clean all parts, to remove any packing debris. 1. First remove blue mixing chamber by unlocking it from the motor base. (see below) levers locked levers unlocked 2. Next, remove lid f...

  • Page 6

    7 7. Remove the aluminum cylinder from the plastic auger cage and lift off the cap on the aluminum cylinder. (you may need to use the cap opener located on the back of the unit under the motor.) 8. Now parts are all ready to wash in warm soapy water, towel dry. Using your home slushease machine™ 1. ...

  • Page 7

    9 using your home slushease™ machine continued 12. Place the unit on a level counter top. Attach the cup holder by snapping into place illustration a. Make sure the dispenser handle is in the up position as shown below, in illustration b. Then plug unit into the electrical cord provided as shown in ...

  • Page 8

    11 helpful tips when inserting the ice cylinder into the cylinder cage unit, try laying it on its side and slide it in. The fit is tight and this may avoid pinching fingers or catching jewelry. Note: drinks with a high sugar or corn syrup base will crystallize faster and produce a thicker slush. Car...