14.4v cordless grease gun owner’s manual warning: read carefully and understand all instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 109635.
Page of 12 2 thank you very much for choosing a northern tool + equipment co., inc. Product! For future reference, please complete the owner’s record below: model: _______________ purchase date: _______________ save the receipt, warranty and these instructions. It is important that you read the enti...
Page of 12 3 work area • keep work area clean, free of clutter, and well lit. Cluttered and dark work areas can cause accidents. • do not use your tool where there is a risk of causing a fire or an explosion; e.G. In the presence of flammable liquids, gasses, or dust. Power tools create sparks, whic...
Page of 12 4 avoid a hazard. Do not attempt to repair the power cord. • do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified service provider for repair. • do not disassemble the charger or the battery pack. Take it to a qu...
Page of 12 5 tool use and care • do not force the tool. Tools do a better and safer job when used in the manner for which they were designed. Plan your work, and use the correct tool for the job. • never use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the switc...
Page of 12 6 operation normal charging make sure the power circuit voltage is the same as that shown on the charger specification plate before connecting to power source. Removing the battery pack depress the two battery release buttons (one button on each side of battery pack) and pull the battery ...
Page of 12 7 removing empty grease cartridge 1) pull back on the follower handle (#11) until follower rod is fully extended and latched onto the locking lever (# 10). 2) unscrew the grease tube assembly from the rechargeable grease gun. 3) press the locking lever and carefully release the follower h...
Page of 12 8 how to use the self-locking trigger the rechargeable grease gun comes with a self-locking trigger to help avoid having the trigger pressed by accident, causing an unwanted grease spill. To stop unwanted spills,, turn the button position from 'unlock' to 'lock' (see figure 2). Note: do n...
Page of 12 9 pump to fill the container. Stop the filler pump when the follower rod extends to approximately 8 inches (20 cm). 2) push the follower rod into the grease tube assembly by pressing the locking lever. How to expel air pockets 1) withdraw the follower rod from the grease tube assembly cap...
Page of 12 10 diagram & parts list (1) part# description part# description 1 battery 7 pump assembly 2 handle assembly 8 packing 3 flexible hose 9 grease tube assembly 4 self-locking trigger 10 locking lever 5 coupler 11 follower handle 6 relief valve 12 fast charger.
Page of 12 11 diagram & parts list (2) part# description part# description 1 interference blanker 8 vent valve 2 motor kit 9 circuit breaker 3 gear assembly kit 10 jiggle switch 4 yoke block 11 button 5 plunger 12 check valve kit 6 grease release valve 13 battery capacity display 7 filler nipple.
Page of 12 12 troubleshooting for replacement parts and technical questions, please call 1-800-222-5381. Warranty one-year limited warranty. Northern tool + equipment co., inc. 2800 southcross drive west p.O. Box 1499 burnsville, mn 55337-0499 made in china.
