1. DL manuals
  2. Notifier
  3. Security System
  4. 1010
  5. Installation And Programming Manual

Notifier 1010 Installation And Programming Manual

Manual is about: Intelligent Fire Detection And Alarm System

Summary of 1010

  • Page 1

    Nsw (head office) 7 columbia court norwest business park baulkham hills nsw 2153 ph: (02) 9899-4155 fax: (02) 9899-4156 qld 16 lucy st moorooka qld 4104 ph: (07) 3892-6444 fax: (07) 3892-6455 vic unit 2 297 ingles st port melbourne vic 3207 ph: (03) 9681-9929 fax: (03) 9681-9930 notifier inertia pty...

  • Page 2: 1: I

    P age 2 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td table of contents s ection 1: i nstallation ............................................................................................. 5 p anel o verview . ......................................

  • Page 3: : P

    1010/2020 i nstallation a nd p rogramming m anual p age 3 c opyright © 2000, n otifier i nertia p ty l td xp-5m & xp-5c m odules ..............................................................................................................................................................................

  • Page 4

    P age 4 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td r ecommended t ype i d ’ s for common applications ......................................................................................................................................... 63 in...

  • Page 5: Ection

    1010/2020 i nstallation a nd p rogramming m anual p age 5 c opyright © 2000, n otifier i nertia p ty l td s ection 1: i nstallation p anel o verview . The following section describes the keypad functions, the cabinet sizes, the 1010 (4 loop) and the 2020 (10 loop) analogue fire detection system. U s...

  • Page 6

    P age 6 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td t he “system reset’ b utton once all alarms have been acknowledged, the “reset” button can be pressed, and the panel will return to all systems normal, unless the alarms are still present, in wh...

  • Page 7: 1010 F

    1010/2020 i nstallation a nd p rogramming m anual p age 7 c opyright © 2000, n otifier i nertia p ty l td l oop t erminations f or t he 1010 f ire i ndicator p anel 1010 p anel – 1 l oop notifier 1010 loop hardware arrangement 1 loop panel top top sib cpu 1010 loop 1 bottom bottom lib-200a not used ...

  • Page 8: 1010 P

    P age 8 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td 1010 p anel – 3 l oops notifier 1010 loop hardware arrangement 3 loop panel top top sib cpu 1010 loop 1 loop 3 bottom bottom loop 2 lib-400 lib-200a top top not used not used bottom bottom not u...

  • Page 9: 2020 F

    1010/2020 i nstallation a nd p rogramming m anual p age 9 c opyright © 2000, n otifier i nertia p ty l td l oop t erminations f or t he 2020 f ire i ndicator p anel 2020 p anel – 1 l oop notifier 2020 loop hardware arrangement 1 loop panel top top sib cpu 2020 loop 1 bottom bottom lib-200a not used ...

  • Page 10: 2020 P

    P age 10 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td 2020 p anel – 3 l oops notifier 2020 loop hardware arrangement 3 loop panel top top sib cpu 2020 loop 1 bottom bottom loop 2 lib-200a lib-200a loop 3 top top lib-200a not used bottom bottom not...

  • Page 11: 2020 P

    1010/2020 i nstallation a nd p rogramming m anual p age 11 c opyright © 2000, n otifier i nertia p ty l td 2020 p anel – 5 l oops notifier 2020 loop hardware arrangement 5 loop panel top top sib cpu 2020 loop 1 bottom bottom loop 2 lib-200a lib-200a loop 3 top top loop 4 lib-200a lib-200a loop 5 bot...

  • Page 12: 2020 P

    P age 12 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td 2020 p anel – 7 l oops notifier 2020 loop hardware arrangement 7 loop panel top top sib cpu 2020 loop 1 loop 7 loop 6 bottom bottom loop 2 lib-400 lib-400 loop 3 top top loop 4 lib-200a lib-200...

  • Page 13: 2020 P

    1010/2020 i nstallation a nd p rogramming m anual p age 13 c opyright © 2000, n otifier i nertia p ty l td 2020 p anel – 9 l oops notifier 2020 loop hardware arrangement 9 loop panel top top sib cpu 2020 loop 1 loop 7 loop 6 bottom bottom loop 2 lib-400 lib-400 loop 3 loop 9 loop 8 top top loop 4 li...

  • Page 14

    P age 14 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td l oop w iring s pecification e xplanation of l oop boards . The lib-200a is a 1-loop board for the 1010 & 2020 panel and can support 99 detectors and 99 modules. The field wiring is electricall...

  • Page 15

    1010/2020 i nstallation a nd p rogramming m anual p age 15 c opyright © 2000, n otifier i nertia p ty l td c ommon f ault f inding t echniques if using optional shielded twisted pair cable to minimise radiated emissions of radio frequency energy, do not allow the shield drain wire to enter the cabin...

  • Page 16: Rs-485 A

    P age 16 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td n etwork w iring s ystems the noti-fire-net network wiring system is to be wired in 1.5mm 2 - 2core twisted pair (no shield) the network cable can run up to 1 klm between nodes (each fire panel...

  • Page 17: A P

    1010/2020 i nstallation a nd p rogramming m anual p age 17 c opyright © 2000, n otifier i nertia p ty l td c onnecting a p rinter d irectly t o t he d isplay (d ia ) rs-232 from dia card to printer dia db9 db25 5 tx rx pin 2 rx pin 3 6 ref ref pin 5 ref pin 7 this printer connection is a non monitor...

  • Page 18: A L

    P age 18 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td c onnecting a l aptop i n t erminal m ode t o e mulate a p rinter a laptop computer can be used in lieu of a printer for uploading the history file or capturing reports from the fire panel. Set...

  • Page 19: -485 F

    1010/2020 i nstallation a nd p rogramming m anual p age 19 c opyright © 2000, n otifier i nertia p ty l td a nnunciator t erminations r s -485 f rom sib c ard t o a nnunciators the rs-485 circuit must be wired in 2 core twisted pair, and can be run to a distance of 1.5 klms, the 24vdc must be from t...

  • Page 20: Lcd-80 (Acs M

    P age 20 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td c onnecting a nd p rogramming a n lcd-80 (acs m ode ) f rom a l aptop the following section details the programming procedure for programming lcd-80 (dual mode) mimics. Note the terminations fo...

  • Page 21

    1010/2020 i nstallation a nd p rogramming m anual p age 21 c opyright © 2000, n otifier i nertia p ty l td p rogramming c ustom m essages once in program mode, the lcd-80 ceases all communication on the rs-485 and waits for commands from the rs-232 circuit. The lcd-80 screen will display: ready for ...

  • Page 22

    P age 22 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td under which each e ntering c ustom p oint l abels custom point labels may be programmed by entering "0" from the initial program prompt. Enter 1 to 9 for 9 custom messages or 0 for custom point...

  • Page 23: Cpu T

    1010/2020 i nstallation a nd p rogramming m anual p age 23 c opyright © 2000, n otifier i nertia p ty l td cpu t erminations cpu 1010/2020 general isolate and general fault relays p ower s upply t erminations active neutral earth cut r27 to disable earth fault detection. Led indicators earth fault b...

  • Page 24: Lib C

    P age 24 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td t erminating the l oop and d evices on the l oop please note: the following examples are the actual wiring terminations for the devices, the example for wiring conventional circuits (mmx-2’s) o...

  • Page 25: (Mmx-2)

    1010/2020 i nstallation a nd p rogramming m anual p age 25 c opyright © 2000, n otifier i nertia p ty l td w iring c onventional c ircuits (mmx-2) the mmx-2 when used with version 3 release software, utilises the 24vdc non-resettable power supply, thereby negating the need for resettable power in th...

  • Page 26: (Cmx-2)

    P age 26 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td w iring c ontrol m odules (cmx-2) cmx-2’s are used for bells, solenoids or any general relay application and can be monitored outputs or relay outputs. W iring s hort c ircuit i solator m odule...

  • Page 27: Xp-5M & Xp-5C M

    1010/2020 i nstallation a nd p rogramming m anual p age 27 c opyright © 2000, n otifier i nertia p ty l td xp-5m & xp-5c m odules the xp-5 control and xp-5 monitor modules are 5 separate modules and addresses mounted on one circuit card, the address is chosen by one rotary switch and one slide switc...

  • Page 28: 1668 F

    P age 28 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td 1668 f an c ontrols t ermination o f m odules 1 2 3 4 5 6 7 8 a b c d 8 7 6 5 4 3 2 1 d c b a rev size drg. No. Title sheet: drawn/ traced engineer design approved this drawing must not be used...

  • Page 29: Scs-8 F

    1010/2020 i nstallation a nd p rogramming m anual p age 29 c opyright © 2000, n otifier i nertia p ty l td d ip -s witch s ettings the following section indicates the typical dip-switch settings for annunciators (scs-8, acm-16at, acm-8r, acm-32a, ldm-32, ldm-32r, lcd-80 and lcd-80tm) s etting a nnun...

  • Page 30: Acm-16

    P age 30 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td acm-16 at p ushbutton & l ed i ndicator a nnunciator sw on off 1 keys disabled keys enabled 2 1 or 3 expanders none or 2 expanders 3 2 or 3 expanders none or 1 expander 4 n/a always use this se...

  • Page 31: Ldm-32 Led D

    1010/2020 i nstallation a nd p rogramming m anual p age 31 c opyright © 2000, n otifier i nertia p ty l td ldm-32 led d river a nnunciator sw3 on off 1 n/a always use this setting 2 expander installed expander not installed 3 n/a always use this setting 4 n/a always use this setting 5 receive only m...

  • Page 32: Lcd-80 Lcd M

    P age 32 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td lcd-80 lcd m imic a nnunciator (d ual m ode ) in t erminal m ode sw1 on off 1 n/a always off 2 n/a always off 3 piezo disabled piezo enabled 4 disable keys enable keys 5 n/a always off 6 n/a al...

  • Page 33

    1010/2020 i nstallation a nd p rogramming m anual p age 33 c opyright © 2000, n otifier i nertia p ty l td a pplying /r emoving p ower to the f ire a larm s ystem after completing the proper installation of all boards, cables and components, apply power in the following manner: 1. Apply ac power 2. ...

  • Page 34: Ection

    P age 34 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td s ection t wo : p rogramming p rogramming o verview r ecommended p rocedure the 1010/2020 programmablility is extremely versatile. It can be programmed 4 ways. 1. Via the panel keypad on the di...

  • Page 35

    1010/2020 i nstallation a nd p rogramming m anual p age 35 c opyright © 2000, n otifier i nertia p ty l td m ain p rogramming m enu on entering the programming mode, (and after entering the password) the display will show the main programming menu: press 1=psys, 2=fsys, 3=pprg, 4=fprg, 5=remv, 6=psw...

  • Page 36

    P age 36 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td p artial s ystem p rogramming option 1 from the main programming menu allows the programmer to change the programming of system-wide functions such as alarm verification of detectors, enabling ...

  • Page 37: Lib I

    1010/2020 i nstallation a nd p rogramming m anual p age 37 c opyright © 2000, n otifier i nertia p ty l td lib i nstallation (1=inst) option 1 from the partial system programming submenu allows the installation or removal of lib boards from memory. The lib boards must still be physically installed o...

  • Page 38: (3=Tdly)

    P age 38 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td t ime d elays (3=tdly) option 3 allows the programmer to activate or de-activate alarm verification of analog addressable detectors, as well as setting the appropriate time delays for this func...

  • Page 39: (5=Zbnd)

    1010/2020 i nstallation a nd p rogramming m anual p age 39 c opyright © 2000, n otifier i nertia p ty l td z one b oundary (5=zbnd) the 1010/2020 can make use of up to 240 software-defined “zones.” these zones can be either forward–activated (fzon) or reverse–activated (rzon), depending upon the par...

  • Page 40: (7=Locp)

    P age 40 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td * default latching (not recommended) • maximum of six devices can be latched at once (five modules maximum). • detectors have priority over modules. After six devices have been latched, detecto...

  • Page 41: Isib (8=Isib)

    1010/2020 i nstallation a nd p rogramming m anual p age 41 c opyright © 2000, n otifier i nertia p ty l td isib (8=isib) option 8 allows the changing of any of the following: intelligent sib allows you to add or delete the isib and set the network address. Ann add or delete annunciators boards. Xint...

  • Page 42

    P age 42 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td d ay /n ight s ensitivity the function day/night sensitivity- gives the operator the option of having the detectors high sensitivity during certain times, or set to low sensitivity during other...

  • Page 43: (0=Cont, 1=Ido)

    1010/2020 i nstallation a nd p rogramming m anual p age 43 c opyright © 2000, n otifier i nertia p ty l td step 3: set detector to use day/night feature changing the detector to select day/night sensitivity now press the program button and enter the password ***** enter the option menu 4=optns 4 ent...

  • Page 44

    P age 44 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td p artial p oint p rogramming partial point programming (pprg) allows the programmer to change the operational parameters of loop devices, software-defined zones, and annunciator points after se...

  • Page 45: Id (1=Typid)

    1010/2020 i nstallation a nd p rogramming m anual p age 45 c opyright © 2000, n otifier i nertia p ty l td t ype id (1=typid) option 1 of the partial point programming menu allows the programmer to change the software type id of any detector, module, zone or annunciator point. The following display ...

  • Page 46: (3=Lbl)

    P age 46 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td l abel (3=lbl) option 3 of the partial point programming menu allows the programmer to change the 20-character custom label (descriptor) associated with each detector, module, or software zone ...

  • Page 47: (4=Optns)

    1010/2020 i nstallation a nd p rogramming m anual p age 47 c opyright © 2000, n otifier i nertia p ty l td o ptional f eatures (4=optns) option 4 of the partial point programming menu allows the programmer to isolate/de-isolate a device, set bell isolate flag or walk test flag (for control modules),...

  • Page 48: (6=Ccbe)

    P age 48 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td note: each detector, module or zone may only be mapped to one annunciator point. Therefore, if it is desired to map one detector to more than one annunciator point or to map a group of detector...

  • Page 49

    1010/2020 i nstallation a nd p rogramming m anual p age 49 c opyright © 2000, n otifier i nertia p ty l td example: full point program on an analog photo-optical detector at l2d23. The photo-optical smoke detector on loop 2 will be programmed to activate two software zones (z13, z29) and a control m...

  • Page 50

    P age 50 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td example: programming monitor modules monitor module 15 on loop 3 is an mmx-2 and is to be programmed to monitor a full zone of conventional smoke detectors, activate software zone (z13), and is...

  • Page 51

    1010/2020 i nstallation a nd p rogramming m anual p age 51 c opyright © 2000, n otifier i nertia p ty l td example: programming software zones software zone 13 programmed as a forward zone to activate two other software zones (z15 and z29), and also mapped to annunciator module address "02" point "0...

  • Page 52: (5=Remv)

    P age 52 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td r emoving a d evice (5=remv) option 5 from the programming menu allows the programmer to remove (from control panel memory) loop devices, software-defined zones or annunciator points. The devic...

  • Page 53: (8=His)

    1010/2020 i nstallation a nd p rogramming m anual p age 53 c opyright © 2000, n otifier i nertia p ty l td a ccessing the h istory l og (8=his) option 8 from the main programming menu allows the programmer to change the parameters associated with history mode. Once the history option is activated, t...

  • Page 54

    P age 54 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td p rogramming g uidelines : w hat is a s oftware z one the 1010/2020 contains 240 software zones to be used in cbe programming. These software zones are broken into two types, forward-activating...

  • Page 55

    1010/2020 i nstallation a nd p rogramming m anual p age 55 c opyright © 2000, n otifier i nertia p ty l td the format for an equation is shown below, where the operators are or, and, not, xzone, del, sdel, and tim; and the operand’s are groupings of initiating devices and/or software zones, as well ...

  • Page 56: and

    P age 56 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td c.B.E e quations : o perators or operator: the first (and most useful) operator is or. Equation: or(z9 z15 z23) if any one of the three operand’s in the equation are in alarm, then the control ...

  • Page 57: Xzone

    1010/2020 i nstallation a nd p rogramming m anual p age 57 c opyright © 2000, n otifier i nertia p ty l td xzone operator: for cross zone operation, the xzone counting operator may be used. Equation: xzone(z23) if any combination of two or more initiating devices (l1d1, l1d2, l1d3, l1d4) that have b...

  • Page 58: Sdel

    P age 58 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td sdel operator: the sdel operator is also used for delayed operation. This is a latched version of the del operator. Once the equation evaluates true, it remains activateduntil areset, even if t...

  • Page 59: C.B.E S

    1010/2020 i nstallation a nd p rogramming m anual p age 59 c opyright © 2000, n otifier i nertia p ty l td c.B.E s ize l imitations each control-by-event has a physical size limitation of 14 bytes in control panel memory. For initiating devices, the control-by-event size can be calculated by the fol...

  • Page 60: C.B.E P

    P age 60 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td c ooperative c ontrol -b y -e vent the null control-by-event the simplest type of control-by-event is the null, which means empty. For initiating devices, the null is denoted by entering ( ) as...

  • Page 61

    1010/2020 i nstallation a nd p rogramming m anual p age 61 c opyright © 2000, n otifier i nertia p ty l td general alarm example # 2: l1d1 activates l1m1 through z1. L1d2 activates l1m2 through z2. L1d3 and l1d4 activate l1m4 through z3. L1m3 will activate when reverse zone 240 is activated. Z240 wi...

  • Page 62

    P age 62 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td fire floor, floor above, floor below example # 4: l1d1 activates z1 and z2. L1d2 activates z1, z2 and z3. L1d3 activates z2, z3 and z4. L1m1 will activate when z1 is active. L1m2 will activate ...

  • Page 63: Software Type-Id’

    1010/2020 i nstallation a nd p rogramming m anual p age 63 c opyright © 2000, n otifier i nertia p ty l td software type-id’ s - a n o verview all devices, software zones, and annunciator points must be programmed with appropriate software type identification. Software type i.D.S allow the 1010/2020...

  • Page 64

    P age 64 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td a ddressable d etectors type i.D. Display label type of device ion cmbo phot ther phod smoke (ion) smoke(combo) smoke(photo) heat(analog) phot(duct) cpx-/751 intelligent ionisation smoke detect...

  • Page 65

    1010/2020 i nstallation a nd p rogramming m anual p age 65 c opyright © 2000, n otifier i nertia p ty l td s ystem c ommon o utput m odules • these software types cannot be programmed for bell isolate. • these software types do not have any control-by-event programming. Type i.D. Type of device brea...

  • Page 66

    P age 66 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td o utput m odules • these software types do have control-by-event programming capability. Type id application bell isolate break tabs cmxc cmxs con* forc* frcm cmx form c cmx control control for...

  • Page 67

    1010/2020 i nstallation a nd p rogramming m anual p age 67 c opyright © 2000, n otifier i nertia p ty l td a nnunciator z one type i.D. Display label type of device azon aact agzn ann zone alm activate ann global zon annunciator point, in the case of an acm- 16at, azon acts as a zone isolate facilit...

  • Page 68: 1668 (Scs-8) P

    P age 68 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td 1668 (scs-8) p rogramming up to 16 fans (per annunciator address, 8 with master, then further 8 with expander fitted) each individual fan may be programmed to either start or stop automatically...

  • Page 69

    1010/2020 i nstallation a nd p rogramming m anual p age 69 c opyright © 2000, n otifier i nertia p ty l td a fan that stops in firemode , with associated duct detector . Address type label annunciator map l1m1 frcm fan start a1p1 l1m2 frcm fan stop a1p2 l1m3 nona fan status a1p3 l1d4 phod duct probe...

  • Page 70

    P age 70 1010/2020 i nstallation a nd p rogramming m anual c opyright © 2000, n otifier i nertia p ty l td upgrading a notifier 1010/2020 version 2.8 to version 3 aus 1 1 upload the config from the fip to the laptop using verifire 2.8 upload. Note: after the upload is completed, check & confirm conf...