Nova Electronics SuBPilot User Manual - page 9
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
16
REAR PANEL
Made of high strength plastic.
MAIN PARTS
MAIN PARTS
MAIN PARTS
MAIN PARTS::::
1.
Main Volume
2.
COMBO Line input for Jack 6,5 and XLR plugs
3.
XLR line-link output
4.
Main Power Switch in A2 Stainless Steel IP68 vandal-proof.
5.
Led light power on/off indicator.
6.
Analog Vu-meters
7.
Charging IP68 Connector. (see Page)
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
17
SUBPILOT is provided, on the front panel, of 4 amplified Speakon output
plug.
These sockets allow you to connect the U-BOAT, POSEODON or
NAUTILUS speakers or other passive speakers
FOR EACH OUTPUT
FOR EACH OUTPUT
FOR EACH OUTPUT
FOR EACH OUTPUT:
Wideband:
20 – 20.000 Hz
Distortion:
Minimum impedance:
2 Ohm
Peak Power:
75 WRms - 4Ohm
Power:
60 WRms – 2 Ohm
40 WRms - 4Ohm
Channel separation:
55 dB
Ratio S/N:
96 dB (valued A)
SUBPILOT is equipped with a potentiometer volume IP69K completely
sealed and built to be used directly immersed and in contact with the
water. It is, therefore, of a component without any risk of oxidation.
The two COMBO plugs inputs are compatible for all connectors XLR and
Jack 6.5. The two inputs are unbalanced and accept line-level signals
from any pre-amp external source.
The two XLR link out plugs allow you to connect to external devices with
SUBPILOT additional line input. It can then connect "cascade" multiple
amplifiers SUBPILOT to increase the total number of underwater
speakers.
SUBPILOT has an on/off key switch in stainless steel A2 built with
antivandal-proof mechanics.
USE: REAR PANEL
1
4
6
7
5
3
2
SPEAKON OUTPUTS
1. MAIN VOLUME
2. COMBO LINE INPUT
3. XLR LINK OUTPUT
4. ON/OFF KEY SWITCH