Nova M67100-E User Manual
Nova Remote Control
User’s Guide North America
M67100-E
INTRODUCTION
The Nova universal remote control allows you to control up to 4 home theater
devices with one easy to use, compact remote control. Just install batteries and
follow the instructions in “Programming Device Control” to program the Nova
remote to control your equipment.
INSTALLING BATTERIES
Your Nova universal remote control requires 2 AA batteries (not supplied).
Battery Use And Safety
•
Use only fresh batteries of the required size and recommended type.
•
Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different
capacities.
•
If you do not plan to use the remote for an extended period, remove the
battery. It can leak chemicals that can destroy electronic parts.
WARNING: Dispose of old batteries promptly and properly. Do not burn or bury
them.
To Install Batteries:
1.
Open the battery compartment cover (located on the back of the
remote).
2.
Place the AA batteries in the compartment and match the + and -
polarity symbols inside.
3.
Replace the cover.
NOTE: When the battery voltage is low, the feedback LED blinks 5 times after a
keypress.
A QUICK LOOK AT THE CONTROLS
PROGRAMMING DEVICE CONTROL
To program this remote to control home theater devices, follow the steps below.
Before proceeding, find the codes for the devices you want to program in
“Manufacturer’s Codes” on the right side of this page and write them down or
highlight them.
1.
Turn on the device (for example, DVD player) and, if needed, load media
(for example, a DVD).
2.
Press a device key on the remote that you wish to program (TV, DVD, STB,
or AUX).
3.
Press and hold SET until the red LED blinks twice, then release.
4.
Enter the first five-digit code for the device and brand that you wish to
program. The LED blinks once as each digit is entered. If the code is
valid, the LED blinks twice.
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the
code again.
5.
Aim the remote at the device and press POWER. The device should turn
off. If it does not, repeat steps 3–5, trying each code for your brand until
you find one that works. If you cannot find a code that works, see
“Searching for Your Code”.
6.
Repeat steps 1 to 5 for the other devices you want to control. For future
reference, write down each working device code in the following chart:
TV Code:
DVD Code:
STB Code:
AUX Code:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote after trying all codes listed for
your brand, or if your brand is not listed, try searching for your code:
1.
Turn the device you wish to control on.
2.
Press the desired device key once.
3.
Press and hold SET until the red LED blinks twice, then release.
4.
Enter 9 9 1. The LED blinks twice.
5.
Press the device group number for your device type (see table below).
6.
Aim the remote at the device and press Power. The remote sends IR
codes from its library to the selected device, starting with the most
popular code first. If the device responds, go to step 8.
7.
If the device does not respond, press CH+ and the remote will test the
next code for that device type. Continue to press CH+ until the device
turns off.
Note: Press CH- to try the previous code.
8.
Now that you have found the correct code, press SET to save the code that
worked for your device. The LED blinks twice to indicate that the code
has been saved. To search for other device codes, repeat steps 1 to 8.
CHECKING THE CODES
If you have set up the remote using the procedure in “Searching for Your Code”,
you may need to find out which five-digit code is operating your equipment.
For example, to find out which code is assigned to your TV:
1.
Press TV once.
2.
Press and hold SET until the red LED blinks twice, then release.
3.
Enter 9 9 0. The LED blinks twice.
4.
To view the code for the first digit, press 1. Count the red LED blinks (for
example, three blinks = 3), and write down the number in the
appropriate code listing at the top of this column.
NOTE: If a code digit is 0, the LED does not blink.
5.
Repeat step 4 for the four remaining digits, using 2 for the second digit,
3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit.
6.
To check for other device codes, repeat steps 1—5, substituting the
device key the desired mode you would like to check.
USING LEARNING
This universal remote control includes a Learningfeature (some models may
not include Learning) so you can add functions that are unique to your home
entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some
considerations.
Learning Precautions
•
Your original remote controls must be in working order for learning to
work properly.
•
Learned keys are mode-specific, so each one can store a unique function
for each mode.
•
Do not use the following keys for learning: Device Keys, SET, or Record
(•).
•
Learning capacity is approximately 42 to 75 keys, depending on the code
being learned.
•
Certain device functions are not learnable including multi-frequency
types, some high frequency functions, and other unusual formats.
•
For optimum learning, avoid high levels of ambient light such as natural
sunlight or energy-efficient fluorescent lights.
NOTE: Please have your original remote controls handy before programming
learning.
Programming a Learned Key
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-
gramming.
1.
Place the Nova head-to-head (about 2" apart) from your original remote
control. Also locate the key (on your original remote control) that you
want the Nova to learn. Press the mode key you wish to learn functions
on.
2.
Press and hold SET until the LED blinks twice, then release.
3.
Enter 9 7 5. The LED blinks twice.
NOTE: If the LED displays one long flash instead, either your batteries are low,
or the Nova has a memory fault. In either case, the remote cannot learn a
new key.
4.
Press the key on the remote you wish to learn onto. The feedback LED
stays lit for three seconds, suggesting the remote is ready to learn.
5.
On the original remote, press and hold the key to be learned. Continue
holding the key on the original remote until the Nova’s LED blinks twice.
NOTE: If the red LED displays one long blink, a learning error has occurred. Try
repeating this step again until a successful capture occurs. If the func-
tion is still not captured, press and hold SET to exit programming and
review the “Learning Precautions” above. If needed, also see “Trouble-
shooting” below. After reviewing, start programming again at step 1.
6.
Repeat steps 4 through 5 for another key you would like to learn onto.
Once you have completed learning all keys, press and hold SET until the
LED blinks twice to save all data learned.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you
select. You can also delete learned programming by teaching a different
function to the key (see “Programming a Learned Key”).
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-
gramming.
1.
Press the mode key that you wish to remove the learned key from.
2.
Press and hold SET until the LED blinks twice, then release.
3.
Enter 9 7 6. The LED blinks twice.
4.
Press the key containing the learned function to be deleted twice. The
LED blinks twice and exits from programming.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 10 seconds pass between key presses, the remote exits
programming.
1.
Press and hold SET until the LED blinks twice, then release.
2.
Press 9 7 6. The LED blinks twice.
3.
Press a mode key twice (i.e., TV, DVD, STB, or AUX) to clear all the learned
keys for that mode. The LED blinks twice and exits from programming.
CHANGING VOLUME LOCK
The Nova universal remote control comes preset to allow independent volume
control of each selected device (Global Volume Unlock). However, you may
change the Volume Lock setting to Global Volume Lock so that one device's
volume controls volume in all other modes. After that, you can perform
Individual Volume Unlock on a selected device to set its volume control for
independent operation or Global Volume Unlock to remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
1.
Press and hold SET until the red LED blinks twice, then release.
2.
Enter 9 9 3, the LED blinks twice.
3.
Press the mode key for the device you want to control (for example, TV).
4.
The LED blinks twice. Now when you press VOL+, VOL-, or Mute, the
selected device (for example, TV) controls the volume regardless of the
current mode.
Unlocking All Volume Control (Restoring Global Unlock)
1.
Press and hold SET until the red LED blinks twice, then release.
2.
Enter 9 9 3, the LED blinks twice.
3.
Press VOL+. The LED blinks four times. Volume is independently
controlled for all programmed devices.
Unlocking a Single Device’s Volume Control
1.
Press the desired device mode key (TV, DVD, STB, or AUX).
2.
Press and hold SET until the red LED blinks twice, then release.
3.
Enter 9 9 3. The LED blinks twice.
4.
Then press VOL-. The red LED blinks four times. Volume is
independently controlled for the selected devices.
PROGRAMMING CHANNEL LOCK
Channel control can be locked so that the Nova remote controls a single
device’s channel-changing functions, regardless of operating mode. This is
often enabled by users who watch all broadcast TV through one device (e.g., a
cable set-top box). The affected keys are 1 through 0, CH+, CH-, and LAST.
Locking All Channel Controls to One Device
To lock all channel-control functions to a specific device, follow these steps:
1.
Press the mode key that relates to the device that you use for channel-
changing control.
2.
Press and hold SET until the mode LED blinks twice, then release.
3.
Enter 9 7 3.The mode LED blinks twice.
4.
Press CH+ once. The mode LED blinks twice.
Now, regardless of what mode you select, the channel keys will only change
channels on the assigned device.
Unlocking Channel Locks
To unlock Channel Lock and thus allow the channel control functions to work
with the device associated to the active operating mode, follow these steps:
1.
Press and hold SET until the mode LED blinks twice, then release.
2.
Enter 9 7 3. The mode LED blinks twice.
3.
Press CH- once. The mode LED blinks four times.
Now the channel functions will correlate to the active mode (e.g., press CH+ in
TV mode and the TV changes channel accordingly).
USING KEYMOVER
Your Nova universal remote control includes a Keymover feature that allows
you to map (or copy) keys from one mode (i.e., source mode) to another mode
(i.e., destination mode) or to a different key in the same mode.
NOTE: Do not use any of the Device Keys, POWER, RECORD, or SET as a source
or destination key
.
Moving Keys in the Same Device Mode
1.
Press the desired device key (TV, DVD, STB, or AUX).
2.
Press and hold SET until the LED blinks twice, then release.
3.
Press 9 9 4. The LED blinks twice.
4.
Press the key you want to move.
5.
Press the new key that should perform the function. The LED blinks
twice.
6.
Repeat steps 1-5 to move additional keys.
Moving Keys to a Different Device Mode
This lets you, for example, control DVD functions while in TV mode. You
would move the transport key functions (Play, Stop, etc.) from DVD mode to
TV mode, as follows:
1.
Press and hold SET until the LED blinks twice, then release.
2.
Press 9 9 4. The LED blinks twice.
3.
Press the device key that contains the function you want to move (e.g.,
DVD).
4.
Press the key you want to move (e.g., Play).
5.
Press the device key that you want to move the function to. (e.g., TV).
6.
Press the key in the new mode that should perform the function (e.g.,
Play). The LED blinks twice.
7.
Repeat steps 1-6 to move additional keys.
Restoring All Keymoved Data in a Specific Mode
1.
Press and hold SET until the LED blinks twice, then release.
2.
Press 9 9 4. The LED blinks twice.
3.
Press the device key you wish to remove all keymoved data from twice.
The LED blinks twice.
4.
Repeat for each device you want to restore.
Restoring Original Key Function
1.
Press the device key for which you wish to remove the keymoved data
from a specific key.
2.
Press and hold SET until the LED blinks twice, then release.
3.
Enter 9 9 4. The LED blinks twice.
4.
Press the key you wish to remove the keymoved data from twice. The
LED blinks twice.
5.
Repeat steps 1-4 for additional keys you wish to remove.
PROGRAMMING MACROS
Your Nova universal remote control includes the ability to program any key
(other than the SET key) with a Macro function. Each one can be set up to
perform a pre-programmed set of sequential key presses with the press of one
key. A macro can be used to control a home theater operation, to set a favorite
channel, or for other multiple functions you would like to control with one key
press. Moreover, each Macro Key can hold up to 15 key presses total.
NOTE: Programming a new macro over an existing one erases the original
macro.
Programming a Mode-Independent Macro
1.
Press and hold SET until the red LED blinks twice, then release.
2.
Press 9 9 5. The LED blinks twice.
3.
Press the key you wish to assign a macro on.
4.
Enter the series of commands you want the macro to execute (up to 15
commands).
5.
Press and hold SET until the red LED blinks twice, then release.
Now, when you press the preset macro key , the remote sends the series of
commands you have entered, regardless of what mode you are in. For example,
you could program a macro key to turn on both your TV and cable box and
select a particular channel.
To clear the macro, repeated steps 1-5 above, but do not enter a series of
commands at step 4.
Programming a Mode-Dependent Macro
1.
Press the device mode key (TV, DVD, STB, or AUX).
2.
Press and hold SET until the LED blinks twice, then release.
3.
Press 9 7 8. The LED blinks twice.
4.
Press the key you wish to assign a macro on.
5.
Enter the series of commands you want the macro to execute (up to 15
commands).
6.
Press and hold SET until the red LED blinks twice, then release.
Now, when you press the macro key , the remote sends the series of commands
you have entered, but only if you are in the mode you selected in step 1. For
example, you could program the macro key to turn on both your TV and cable
box and select a particular channel, but only if you are in TV mode. If you are
in DVD mode, this key does not execute the macro you set up in TV mode.
To clear the macro, repeat steps 1-6 above, but do not enter a series of
commands at step 5.
TROUBLESHOOTING
PROBLEM: LED does not blink when you press a key.
SOLUTION: Try pressing different keys. Replace the batteries with 2 new AA
batteries.
PROBLEM: LED blinks when you press a key, but device does not respond.
SOLUTION: Make sure the remote is aimed at your device and is not more than
40 feet away.
PROBLEM: LED blinks one long blink while in SET mode.
SOLUTION: An entry error has occurred (for example, wrong key). Try entering
the sequence again.
PROBLEM: Remote does not control devices or commands are not working
properly.
SOLUTION: Try all listed codes for the device. Make sure the device operates
with an infrared remote control.
PROBLEM: No volume on a device.
SOLUTION: See “Changing Volume Lock” and make sure the volume is not
locked to a different mode already.
PROBLEM: Channels do not change properly when directly entering digits to
change channels.
SOLUTION: If the original remote control required you to press Enter to change
channels, press Enter on this remote after entering the channel number.
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers
Setup Codes for Audio Accessories
Setup Codes for Audio Receivers
Setup Codes for Cable Converters
Setup Codes for Cable/PVR Combos
Setup Codes for CD Players
Setup Codes for DVD Players
Press this key…
To…
Select a device.
Turn the selected device on or off.
Program sequences.
Select the next or previous channel.
Select next or previous chapter on some models of
DVD players.
Press LAST to recall the last-viewed channel.
Raise or lower the sound level.
Press MUTE to turn the sound off or on.
Move the cursor in the menu screens.
Press OK to choose the highlighted menu option.
Skip backward, rewind, fast forward, skip
forward, stop, pause, or play content on DVD,
DVR, PVR, or CD devices.
Press SKIP FORWARD to skip ahead in your
program.
Press SKIP BACK to skip back in your program.
View the current channel and program
information..
Display the menu for the selected device.
Exit the selected device's menu, guide, or
program without making a menu selection.
Display the program guide for the selected device.
Switch the video and/or audio input of the active
device.
Directly enter channels (for example, 09 or 31).
Press Enter to send channel number entries on
some TV models.
Code
Device Group
0
Cable (Cable Converters, Video Accessories, Satellite
Receivers)
1
TV (TVs)
2
VCR (VCRs, DVD players)
3
Audio (Audio Amplifiers, Audio Amp/Tuners, CD
players)
Adcom
30577, 31100
Anthem
32220
Bose
30674
Carver
30892
Durabrand
31561
Elan
30647
GE
30078
Harman/Kardon
30892
JVC
30331
Left Coast
30892
Lenoxx
31561
Marantz
30892
McIntosh
30251
Modulaire
30395
NEC
30264
Optimus
30395, 30823
Philips
30892
Pioneer
30823
Polk Audio
30892
RadioShack
30395
RCA
30823
Realistic
30395
Shure
30264
Sony
30689, 30815
Soundesign
30078
Victor
30331
Wards
30078
Yamaha
30354, 30133
Accurian
31106
Altec Lansing
30607, 31056
Apple
31115
Creative
30872
DLO
31155
GPX
32113
Griffin
31891
iDeck
31106
iHome
32152
iLive
32113
Imerge
31491
iPort
31917
Klipsch
31339
Marantz
31491
Memorex
32119
Monitor Audio
31106
Motorola
31464
Omnifi
31605
Roku
31828
Sonance
31917
Yamaha
31809, 31810, 32021
ADC
30531
Adcom
30616
Aiwa
31405, 30189, 30121, 31089, 31388, 31641
Akai
30244, 31512
Alco
31390
AMC
31077
Amphion Media Works
31563
AMW
31563
Anam
31609, 31074
Anthem
31185
Apex Digital
31257, 31430, 31774
Arcam
31189
Audiotronic
31189
Audiovox
31390
B & K
30702, 30820, 30840
BK
30702
Bose
31229, 30639, 31253, 31629, 31841, 31933
Cairn
30189
Cambridge Soundworks
31370
Capetronic
30531
Carver
31189, 30189, 30121, 31089, 31289
Coby
31389
Curtis Mathes
30014
Daewoo
31250
Denon
31360, 30121, 31104, 31142, 31306, 32857
Emerson
30531
Fisher
31801
Garrard
30463
Grundig
30189
Harman/Kardon
30110, 30189, 30891, 31289, 31304, 31306, 32241
Hitachi
31273, 31801
iLive
32013
Inkel
30491
Insignia
31030, 31077, 31893, 32169, 32175
Integra
30135, 30842, 31298, 31320, 31805
iSymphony
32258
JBL
30110, 31306
JVC
31058, 30074, 31374, 31495, 31871, 32239
Kawasaki
31390
Kenwood
31313, 31570, 30077, 30186, 31027
KLH
31390, 31412, 31428
Koss
31366, 31497
Lexicon
31076
LG
31293, 32197
Linn
30189
Liquid Video
31497
Magnavox
31189, 31269, 30189, 30391, 30531, 31089, 31266,
31514
Marantz
31189, 31269, 30189, 30891, 31089, 31289
McIntosh
31289
Micromega
31189, 30189
Mitsubishi
31393
Musicmagic
31089
Myryad
31189
Nakamichi
31313, 30097, 31555
Norcent
31389
Nova
31389
Onkyo
30135, 30842, 31298, 31320, 31531, 31805, 31905
Optimus
31023, 30074, 30014, 30121, 30186, 30531, 31074
Oritron
31366, 31497
Outlaw
30391
Panasonic
31308, 31518, 30367, 31275, 31288, 31316, 31548,
31633, 31763, 31764
Philips
31189, 31269, 30189, 30391, 30891, 31089, 31266
Pioneer
31023, 30014, 30150, 30244, 30531, 30630, 31123,
31384, 31935
Polaroid
31508
Polk Audio
30189, 31289
Proscan
31254
RadioShack
31609
RCA
31023, 31609, 31254, 30531, 31074, 31123, 31390,
31511
Realistic
31609, 30121, 30186
Revox
30189
Rio
31869
Samsung
31295, 31304, 31500
Sangean
32165
Sansui
31189, 30189, 31089
Sanyo
31251, 31469, 31801
Sharp
30186, 31286
Sharper Image
31556
Sherwood
30491, 31077, 31653, 31905, 32169
Sherwood Newcastle
32169
Sonic Blue
31869
Sonic Frontiers
31185
Sony
31058, 31441, 31258, 31759, 31622, 30474, 31158,
31406, 31558, 31658, 31758, 31822, 31858
Stereophonics
31023
Sunfire
31313
Teac
30463, 31074, 31390, 31528
Technics
31308, 31518, 31633
Thorens
31189
Toshiba
30135, 30842, 31123, 31788
Venturer
31390
Victor
30074
Wards
30189, 30014
XM
31406
Yamaha
31023, 30176, 30186, 30376, 31176, 31276, 31331,
31375, 31376, 31476, 31815, 32061
Zenith
30857, 31293
A-Mark
00008, 00144
ABC
00237, 00003, 00008
Accuphase
00003
Acorn
00237
Action
00237
Active
00237
ADB
02586
Americast
00899
Amino
01602, 01822
Archer
00237
BCC
00276
Bell South
00899
British Telecom
00003
Century
00008
Cisco
01877, 00877, 01982
Clearmaster
00883
ClearMax
00883
Cool Box
00883
Coolmax
00883
Digeo
01187, 02187
Director
00476
Fosgate
00276
GE
00144
General Instrument
00476, 00810, 00276, 00003
Gibralter
00003
GMI
00883
GoldStar
00144
Hamlin
00009, 00273
Hitachi
00003, 00008, 00009
i3 Micro
01602
Insight
00476, 00810
Jerrold
00476, 00810, 00276, 00003
Memorex
00000
Mitsubishi
00003
Motorola
01376, 00476, 00810, 00276, 01187, 01106, 01982
Multitech
00883
Myrio
01602, 01822
Nova Vision
00008
Novaplex
00008
Pace
01877, 00877, 00237, 00008, 01982
Panasonic
00000, 00008, 00144, 00107, 01982
Paragon
00000, 00008, 00525
Penney
00000
Philips
01305, 00317
Pioneer
01877, 00877, 00144, 00533
Pulsar
00000
Quasar
00000
RadioShack
00883
RCA
01256
Regal
00276, 00279, 00273
Runco
00000
Samsung
00003, 00144, 01982
Scientific Atlanta
01877, 00877, 00477, 00237, 00003, 00000, 00008,
01982
Sejin
01602
Sony
01006
Sprucer
00144
Starcom
00003
Supercable
00276
Supermax
00883
Thomson
01256
Torx
00003
Toshiba
00000
Tristar
00883
United Cable
00276, 00003
US Electronics
00276, 00003, 00008
V2
00883
Videoway
00000
Viewmaster
00883
Vision
00883
Vortex View
00883
Zenith
00000, 00525, 00899
Americast
00899
Amino
01822
Cisco
01877, 01982
Digeo
01187, 02187
General Instrument
00810
Jerrold
00810
Motorola
01376, 00810, 01187, 01106, 01982
Myrio
01822
Pace
01877, 00237, 01982
Pioneer
01877
RCA
01256
Scientific Atlanta
01877, 01982
Sony
01006
Supercable
00276
Thomson
01256
Zenith
00899
Acoustic Research
30420
Aiwa
30157
Arcam
30157
Audio Research
30157
Burmester
30420
Cairn
30157
California Audio Labs
30029
Cambridge Soundworks
30157
Carver
30157
Curtis Mathes
30032
Denon
30034
DKK
30000
DMX Electronics
30157
Fisher
30000
Garrard
30393, 30420
Genexxa
30032
Grundig
30157
Hafler
30173
Harman/Kardon
30100, 30157, 30173
Hitachi
30032
Inkel
30157, 30180
Integra
30101
JVC
30032, 30072
Kenwood
30626, 30000, 30029, 30028, 30190
KLH
31318, 31711
Krell
30157
Linn
30157
Magnavox
30157, 30038, 30274
Marantz
30626, 30029, 30157, 30038, 30180, 30435
Matsui
30157
McIntosh
30256, 30290, 30660
MCS
30029
Memorex
30000, 30032, 30420
Micromega
30157
Miro
30000
Mission
30157
Modulaire
30000, 30032, 30087, 30180, 30420
MTC
30420
Myryad
30157
NSM
30157
Onkyo
31327, 30101
Optimus
30000, 30032, 30087, 30393, 30420
Panasonic
30029, 30388, 30752
Parasound
30420
Penney
30029
Philips
30626, 30157, 30274
Pioneer
31062, 30032, 31087
Polk Audio
30157
Proceed
30420
Proton
30157
QED
30157
Quad
30157
Quasar
30029
RadioShack
30000, 30032, 30180, 30420
RCA
31062, 30032, 30053, 30420
Realistic
30000, 30032, 30087, 30180, 30420
Revox
30157
Roksan
30435
Rotel
30157, 30420
SAE
30157
Sansui
30000, 30157
Sanyo
30000, 30087
Sharp
30180
Sherwood
30180
Sonic Frontiers
30157
Sony
30490, 30000, 30100, 31364, 30185
Sugden
30157
Sylvania
30157
Symphonic
30180
TAG McLaren
30157
Tandy
30032
Tascam
30393, 30420
Teac
30490, 30180, 30393, 30420
Technics
30029
Thule Audio
30157
Victor
30072
Wards
30032, 30157, 30053, 30087
Yamaha
30490, 30036, 31292
Yorx
30000
3D LAB
20503, 20539
Accurian
20675, 21072, 21416
Advent
21016
Afreey
20698
Aiwa
20641
Akai
20695, 20705, 20770, 20899, 21089
Alba
20672, 20717
Alco
20790
Allegro
20869
Amphion Media Works
20872
AMW
20872
Apex Digital
20533, 20672, 20717, 20755, 20794, 20796, 20797,
20830, 21004, 21020, 21056, 21061, 21100
Arrgo
21023
Aspire Digital
21168, 21407
Astar
21489
Audiovox
20717, 20790, 21041, 21071, 21072, 21121, 21122
Axion
21071, 21072
B & K
20655, 20662
BBK
21224
Bel Canto Design
21571
Blaupunkt
20717
Blue Parade
20571
Blue Sky
20695
Bose
21895, 22023
Brandt
20651
Broksonic
20695, 20868
California Audio Labs
20490
Celestial
21020
Centrex
20672, 21004
Cinea
20831
CineVision
20876, 20833, 20869
Citizen
21003, 20695, 21277
Clairtone
20571
Coby
20778, 21077, 21086, 21107, 21177
Craig
20831
Creative
20503, 20539
Curtis Mathes
21087
CyberHome
20816, 20874, 21023, 21024, 21117, 21129, 21502,
21537
Cytron
20705
Daewoo
20784, 20705, 20770, 20833, 20869, 21169, 21172,
21234, 21242
Dansai
20770
Daytek
20872
Decca
20770
Denon
20490, 20634, 22258
Denver
20778
Desay
21407
DigitalMax
21738
Digitrex
20672
Disney
20675, 21270
DiViDo
20705
Dual
20675, 21068, 21085
Durabrand
21127
DVD2000
20521
Electrohome
21003
Emerson
20591, 20675, 20821, 21268
Enterprise
20591
Entivo
20503, 20539
Enzer
20770
ESA
20821, 21268
Firstline
20651
Fisher
20670
Funai
20675, 21268, 21334
Gateway
21073, 21077, 21158
GE
20522, 20815, 20717
Go Video
20573, 20744, 20717, 20715, 20741, 20783, 20833,
20869, 21044, 21075, 21099, 21158, 21304, 21730
Go Vision
21071, 21072
GoldStar
20741, 20869
Goodmans
20790
Gradiente
20490, 20651
Greenhill
20717
Grundig
20539, 20705
Harman/Kardon
20582, 20702
Hello Kitty
20831
Hitachi
20573, 20664, 21247
Hiteker
20672
Humax
21500, 21588
iLo
21348
Initial
20717
Insignia
21268
Integra
20571, 20627, 21769
IRT
20783
JBL
20702
Jensen
21016
JMB
20695
JVC
20558, 20623, 20867, 21164, 21275, 21550
Kawasaki
20790
Kenwood
20490, 20534
KLH
20717, 20790, 21020, 21149
Kloss
20533
Koss
20651, 21061
Lasonic
20627, 20798
Lecson
21533
Lenoxx
21127
LG
20591, 20741, 20869
LiteOn
21058, 21158, 21416, 21440, 21656, 21738
Loewe
20511, 20741
Logix
20783
Magnasonic
20651, 20675
Magnavox
20503, 20539, 20646, 20675, 20821, 21268, 21354,
21506
Marantz
20503, 20539, 20675
McIntosh
21533, 21273
Medion
20651
Memorex
20695, 20831, 21270
Microsoft
20522, 22083
Minato
20752
Mintek
20839, 20717
Mitsubishi
21521, 20521
NAD
20741
Naiko
20770
NEC
20785, 20869
Nesa
20717
NexxTech
21402
Norcent
21003, 20872, 21107, 21265
Onkyo
20503, 20627, 21769
Oppo
20575, 21224
Optimus
20571
Oritron
20651
Palsonic
20672
Panasonic
20503, 20490, 20571, 20632, 20703, 21362, 21462,
21490, 21641, 21762
Philco
20675
Philips
20503, 20539, 20646, 20675, 20854, 21260, 21267,
21340, 21354, 22056, 22084
PianoDisc
21024
Pioneer
20525, 20571, 20142, 20631, 20632, 21460, 21512,
21571
Polaroid
21020, 21061, 21086
Polk Audio
20539
Portland
20770
Presidian
20675, 21072, 21738
Prima
21016
Proceed
20672
Proscan
20522
ProVision
20778
Qwestar
20651
Radionette
20741
RadioShack
20571
RCA
20522, 20571, 20717, 20790, 20822, 21022, 21132,
21769
Realistic
20571
Reoc
20752
Rio
20869
Rotel
20623, 21178
Rowa
20823, 21004
Saba
20651
Sampo
20698, 20752
Samsung
20490, 20573, 20744, 20199, 20820, 20899, 21044,
21075
Sansui
20695
Sanyo
20670, 20675, 20695, 20873, 21334
Schneider
20783
Schwaiger
20752
Sensory Science
21158
Sharp
20630, 20675, 20752, 21256, 22250
Sharper Image
21117
Sherwood
20770, 21043, 21077
Sherwood Newcastle
21077
Shinsonic
20533, 20839
Slim Art
20784
Sonic Blue
20573, 20715, 20783, 20869, 21099
Sony
20533, 21533, 20864, 21033, 21070, 21431, 21516
Sova
21122
Superscan
20821
SVA
20717
Sylvania
20675, 20821, 21268
Symphonic
20675, 20821, 21268, 21334
Tatung
20770
Teac
20571, 20717, 20790
Technics
20490, 20703
Technika
20770
Terapin
21031
Tevion
20651
Theta Digital
20571
Thomson
20522, 20511
Tivo
21503, 21512, 21588
Toshiba
20503, 20573, 20539, 20695, 21045, 21154, 21503,
21510, 21588, 21769
Unimax
20770
Universum
20591
Urban Concepts
20503, 20539
US Logic
20839
V
21064, 21226
Venturer
20790
Vizio
21064, 21226
Xbox
20522, 22083
Yamaha
20490, 20539, 20545
Yamakawa
20872
Zenith
20503, 20591, 20741, 20869
Zeus
20784
Nova CE.fm Page 1 Wednesday, July 16, 2008 12:39 PM