User's manual 3d video controller nova3d hd rev 1.0.0 no: ns160100010
User manual of 3d video controller www.Novastar-led.Cn 2 statement dear users: welcome to use nova's products. We are pleased to offer this manual to help you understand and use the product. In the preparation of the manual, we try to make it accurate and reliable. Nova may revise and alter the cont...
User manual of 3d video controller www.Novastar-led.Cn 3 fcc caution: any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the fcc rules. Operation is subject to the ...
User manual of 3d video controller www.Novastar-led.Cn 4 content fcc caution: ........................................................................................................................................................................................... 3 1. Safety statement ...............
User manual of 3d video controller www.Novastar-led.Cn 5 8.5 d isplay c ontrol ............................................................................................................................................................................... 19 8.6 c ommunication setting ..................
User manual of 3d video controller www.Novastar-led.Cn 6 1. Safety statement to avoid potential hazards, please use this equipment according to the regulations. In case of damages, non-professionals should not open for maintenance without permission; please contact the after-sales department of the ...
User manual of 3d video controller www.Novastar-led.Cn 7 product feature: 1) it adopts the output of standard 3d video; 2) it adopts an innovative architecture to implement smart configuration; the screen debugging can be completed within 30 seconds 3) it adopts the nova g4 engine; the screen is sta...
User manual of 3d video controller www.Novastar-led.Cn 8 ⁓ knob: press knob for entry; rotate knob for selection or adjustment; ⁔ return key: exit current operation or option; ⁕ video source switch; the key is bright after press when the video source has signal; the key flashes when the input of vid...
User manual of 3d video controller www.Novastar-led.Cn 9 5. Signal connection connect the required hardware equipment reference with the interface descriptions of the previous chapters. Fig. 5-1 3d hd signal connection tips: it's must to turn-off power before signal connection. If it is required to ...
User manual of 3d video controller www.Novastar-led.Cn 10 6. Operational motion instruction knob: press the knob under main interface to enter the operation interface of menu; rotate the knob to select menu or press the knob under the operation interface of menu to select current menu or enter s...
User manual of 3d video controller www.Novastar-led.Cn 11 unable to preempt network or usb communication; g. It indicates that the current brightness of display is 60%; h. It indicates that the controller is master mode ; i. It indicates that port2 and port 3 are provided load. 8. Operation tips: th...
User manual of 3d video controller www.Novastar-led.Cn 12 method 2: custom set horizontal res, vertical res and custom refresh rate and then select "apply" and press the knob for application. If the application is not confirmed, custom resolution is invalid. 8.2 step 2: screen setting the preconditi...
User manual of 3d video controller www.Novastar-led.Cn 13 step 4 set cabinet out1 qty. The device has some limitations on the cabinet quantity of ports. For details, see precautions for screen setting a). Step 5 set the data flow(front view). Pay attention to precautions for screen setting c), d) an...
User manual of 3d video controller www.Novastar-led.Cn 14 8.3 step 3: brightness return to the main menu interface. Press the knob to select the corresponding value of brightness. You can rotate the knob to adjust the value at this time. 8.4 advanced setting several setting options of main functions...
User manual of 3d video controller www.Novastar-led.Cn 15 8.4.3 master/redundancy set the controller as master control mode or backup mode when there are multiple controllers in the system. 8.4.4 loading the configuration file of cabinet 3d hd is connected with pc, novalct-mars runs on pc and cabine...
User manual of 3d video controller www.Novastar-led.Cn 16 2) import the configuration file of cabinet into 3d hd. The operation steps are as follows:.
User manual of 3d video controller www.Novastar-led.Cn 17 tips: novalct-mars automatically reads the existing configuration files in the controller. The novalct-mars can perform operations such as modification of file name, adjustment order of file and delete these files. 3) load the configuration f...
User manual of 3d video controller www.Novastar-led.Cn 18 8.4.7 return to home screen the time period during which the system stops at current interface and then automatically returns to home screen when there is no operation. The system default value is 60s. 8.4.8 hardware version view the hardware...
User manual of 3d video controller www.Novastar-led.Cn 19 8.5 display control normal : normally display. blank out: the display is blank freeze: the current play lists are frozen. The blank screen occurs when the current source signal is lost. testing pattern: there are eight kinds of testin...
User manual of 3d video controller www.Novastar-led.Cn 20 8.7 language setting 9. Firmware update 3d hd connect to a computer , and run novalct-mars on this computer, login as an advanced user , the password is admin, then type in admin on keyboard to open the page for updating the hardware program..
User manual of 3d video controller www.Novastar-led.Cn 21 current operation communication port the serial port under which the hardware program needs update..
User manual of 3d video controller www.Novastar-led.Cn 22 program path select the hardware program needs to be updated currently. Sending card check to update the mcu program of sending card. Receiving card fpga check to update the fpga program of sending card. Update update the hardware program int...
User manual of 3d video controller www.Novastar-led.Cn 23 11. Technology specification input index interface number resolution specification dvi 1 vesa standard (support 1080i input); support hdcp 1920x1080@60hz, 2560x1600@60hz, 3840x1080@60hz, 1920x1080@120hz hdmi 1 eia/cea-861 standard; meet hdmi-...
User manual of 3d video controller www.Novastar-led.Cn 24 12. Installation dimension fig. 12-1 3dhd dimension (unit: mm).