Novatel GNSS-501 User Manual - page 3
of
8
3
MOUNTING PLATE (NOVATEL P/N 01018317)
ANTENNA CARE
The GNSS-501 and GNSS-502 are designed to withstand the elements, including rain, snow, and dust.
However, to ensure your antenna performs optimally, keep the radome (the top surface of the antenna)
clean and brush off any ice and snow.
The optimal screw penetration into the mounting holes is 6 mm (±1 mm) deep. When selecting
screws for mounting, ensure the screw penetration does not exceed this specification. Using
excessively long screws can damage the antenna enclosure.
Two magnetic mounts also available on
the bottom of the antennas.
Dimensions are in inches.