O'Neal BLINC User Manual - page 7

                             When the headset rings, press and hold the Multi-Function Button (MFB) on the helmet 

control for about 3 seconds and release the MFB to reject an incoming call. Note: this function is valid only if 

your phone supports Hands-Free Profile. 

                                                                                        During a call using your headset, press the 

Multi-Function Button (MFB) for approximately 2 Seconds. If your headset works with Head Set Profile,you just

need turn off your headset.

Note: If the Multi-Function Button (MFB) is pressed too long, the call will end. 

helmet. When the call arrives,the intercom will disconnect autmatically, then you can press the Multi-function 

(MFB) to answer the phone call.

Note: Not all phone brands may apply,if you can not hear the incoming call, you need set your mobile phone on

the vibrate mode and position it so that you will feel it vibrate. When the call arrives, press the Multi-Function

(MFB) on the helmet control unit once to end the intercom connection, they press it again to answer the phone

call.

4. Last Number Redial:

3. To reject a call:

2. To terminate a call:

1. To answer a call:

5. To use Voice Commands:

6. To transfer the sound back to your mobile phone:

7. To transfer sound from mobile phone to BLINC   headset:

8. Taking a phone call while in intercom mode:

                                        When the headset is idle, double click the Multi-Function Button (MFB) to redial the last 

called phone number.