O2 DSL Router Quick Start Manual

C

D

Typ 1

Typ 2

O

2

DSL Router Classic

Quick start guide

You will require the following components to set up and configure your O

2

 DSL Router Classic. Please note that the O

2

 DSL Router Classic  

will only work once your telephone line has been activated. Please see your welcome letter for the activation date.

Power supply unit 

with power cable

DSL cable 

2 adaptors for 

phone/fax

Connecting the DSL router to the power supply

1

Connecting the DSL router to the telephone socket

2

Connecting the DSL router to the computer

Overview of the package contents and the necessary installation information

A

B

C

D

Please only use your O

2

 DSL Router Classic in conjunction with your O

2

 DSL connection.

Setting up and connecting the O

2 

DSL Router Classic

Connect the small connector on the DSL cable        to the grey DSL connector 

on the DSL router. Now insert the other end of the DSL cable into the  

telephone outlet, which is labelled with an (F) or a telephone symbol. 

The DSL router will now establish a DSL connection. During this time, the 

LEDs marked »DSL« and »INTERNET« will flash in succession. 

Once the »DSL« LED is permanently illuminated and the »INTERNET« LED 

flashes, the DSL router has successfully established the internet connection.

Note: This process may take up to 3 minutes.

The DSL router and computer are connected via LAN (with Ethernet cable).

Connect the Ethernet/LAN cable        to one of the yellow Ethernet 

connections marked 1– 4 on the DSL router. Connect the second yellow 

plug on the cable to the network connection port on your computer.

E

C

Connect the power cable        to the DSL router       . Then plug the  

power supply unit into a power outlet.

Turn the DSL router on using the ON/OFF switch.

Once the blue LED lamp marked »POWER« is continuously illuminated, 

the DSL router is ready for use. 

Note: This process may take up to 1 minute.

Tip: When setting up the DSL router, please follow the safety notes 

in the manual.

B

A

O

2

 DSL Starter CD

O

2

 DSL manual

Ethernet/LAN  

cable

E

F

G

Welcome letter 

(received in advance)

H

Please follow the 

instructions in 

sequential or

der!

Tip: You will find English and Turkish versions of the quick start guide as PDF documents 

on the O

2

 DSL Starter CD in the »Handbücher« folder.

Connecting the phone/fax to the DSL router

3

Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are 

permanently illuminated. You can now connect your phone/fax.

Note: This process may take between 3 and 5 minutes.  

Your phone/fax is connected directly to the DSL router and not to the  

telephone socket.

If your telephone connector cable has a Type 1 plug (see top picture), 

connect this plug directly to one of the two DSL router connectors marked 

»PHONE 1« or »PHONE 2«. 

If your telephone connection cable has a Type 2 plug, please use one of the 

adapters supplied        as shown in the adjacent picture. 

Tip: Connect the phone to the adapter via socket (F); fax via socket (N).

Your phone/fax is now ready to use.

O

2

 DSL Router 

Classic

1

Power outlet

ON/OFF switch

A

D

RESET

E

C

B

Telephone outlet 

TAE outlet (F)

Computer

4

Phone/fax (analogue)

1 The O

2 

DSL Router Classic only works with an O

2 

DSL tariff from O

2 

Germany. If you want to use it with a  

different DSL provider, the integrated calling function will not be available. 

Please turn over 

B

A

E

D