Oakley RAZRWIRE Quick Start Manual - page 9
Avoid Moisture
Using RAZRWIRE in or near water or other liquids, or in wet locations, may cause electric shock and serious injury. The transceiver module is not
waterproof, so follow these safeguards:
• Do not use RAZRWIRE while swimming or bathing.
• Do not wear RAZRWIRE in the rain.
• If any food or liquid is spilled on RAZRWIRE or its power adapter, unplug the charging cable from RAZRWIRE and unplug the power
adapter from the electrical outlet before drying.
Location of Use
RAZRWIRE is NOT to be used in the vicinity of any explosive or hazardous substances, as it may become volatile and cause serious injury or death.
See "Electromagnetic Interference" above for restrictions on using RAZRWIRE in medical facilities and aboard aircraft.
Proper Care of your RAZRWIRE
Do Not Modify or Dismantle
Do not attempt to open RAZRWIRE. Doing so may expose you to electric shock and serious injury. There are no user-serviceable parts inside. Any
attempt to alter or repair the module will void the limited warranty. Users are not permitted to make changes or modify the device in any way.
Changes and modifications void the user's authority to operate the device. See 47 CFR Sec. 15.21.
Battery
Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain internal rechargeable batteries must be in
accordance with local environmental regulations.
Temperature
• Do not store or use RAZRWIRE in temperatures lower than -20ºC / -4ºF or higher than 50ºC / 122ºF.
• Do not recharge RAZRWIRE in temperatures lower than 0ºC / 32ºF or higher than 40ºC / 104ºF.
• Conditions inside a parked car can exceed this temperature range. Do not store RAZRWIRE in a parked car.
• Do not store RAZRWIRE in direct sunlight.
• Storing RAZRWIRE fully charged in high temperature conditions may permanently reduce the life of the internal battery.
• Battery life may temporarily shorten in low-temperature conditions.
Shockwave
Do not expose RAZRWIRE to excessive force or impact. Be careful not to drop RAZRWIRE.
Charger
Do not force the charging cable connector into the module port. If the connector won't go into the port, try flipping the connector 180 degrees.
Do not attempt to charge RAZRWIRE with any charger other than the one designed by Oakley specifically to be used with this product.
Cleaning
When cleaning RAZRWIRE, please note the following:
• The transceiver module is not waterproof, and moisture may damage the electronic circuitry. Do not rinse or immerse any part of the
module. Keep the module dry at all times.
• Before cleaning, make sure RAZRWIRE is unplugged from the wall charger.
• Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive cleaning compounds or solvents. These substances
may damage the lens coatings or leak into the module and damage the electronic circuitry.
• Should a lens become scratched, have it replaced immediately to ensure your vision is not compromised.
Support
If your RAZRWIRE Bluetooth Accessory Module does not function, please make sure that the battery is charged, you have followed the
instructions to pair your Bluetooth phone to the RAZRWIRE. In addition, go to www.oakley.com/RAZRWIRE for the latest support information. If
RAZRWIRE Bluetooth Accessory Module still does not function, contact Motorola Product Support at www.hellomoto.com or 1.877.MOTOBLU.
RAZRWIRE QUICK START GUIDE
6