1. DL manuals
  2. OAKWORKS
  3. Indoor Furnishing
  4. Clodagh Leo
  5. Instruction Manual

OAKWORKS Clodagh Leo Instruction Manual

Manual is about: Spa Tables

Summary of Clodagh Leo

  • Page 1

    Leo ™ i n s t r u c t i o n m a n u a l www.Oakworks.Com · 717.235.6807.

  • Page 2

    © copyright 2009 o akworks ® , inc. Manual part # mmmnst0015 1st edition, april 2009 printed in u.S.A. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of o akworks ® , inc. O akworks ® is a registered tr...

  • Page 3

    Warnings / symbols 1 table of contents table of contents table of contents symbol identification .................................................................................... Pg 2 warnings & safety instructions ..................................................................... Pg 3 groundi...

  • Page 4

    2 symbol identification warnings symbol identification symbol identification this symbol, when used in this manual and on product labels, represents a caution. Be sure to read and comply with all precautions and warnings. This symbol, when used in documentation on this product, indicates danger and ...

  • Page 5

    3 warnings / safety improper use of this device can cause injury. Be sure to read all operating instructions prior to use to prevent injury to operator or client. Electrical shock hazard. To reduce the risk of electric shock, always disconnect the table from the electrical outlet before moving the t...

  • Page 6

    4 warnings / safety warnings warnings & safety instructions warnings & safety instructions this product is equipped with an interior accessory outlet. The total electrical load of equipment plugged into this set of outlets is not to exceed 840 watts. Close supervision is necessary when this furnishi...

  • Page 7: Read and

    5 grounding grounding instructions (electric model only) warnings & safety instructions (continued) grounding instructions this product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. ...

  • Page 8

    Product description flex top table specifications • height range: 25” - 35” (64-89 cm) • width: 29” or 31” (74 cm or 79 cm) • length: 73” (185 cm) • lift capacity: 625 lbs. (284 kg.) • weight: 200 lbs. (91 kg.) • shipping weight: 250 lbs. (114 kg.) • top: electronically controlled flex top • base: m...

  • Page 9: Caution

    7 installation installation assembly & installation installation the table comes completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. Arrange the power cord and foot switch so that they will not create a tripping hazard. Place the controls in a ...

  • Page 10: Caution

    Directions for use 8 directions for use directions for use the o akworks ® leo™ comes complete with a multi-functional hand control that operates the backrest and leg rest positioning functions as well as a foot control that operated the height with ease. Foot control operate the foot control as sho...

  • Page 11: Caution

    9 directions for use directions for use hand control - 4 positioning buttons the hand control operates all the positioning of the backrest, seat and leg rest of the top. Adjusting the top when operating the table’s controls be sure to observe all cautions and warnings given in the manual to pre- ven...

  • Page 12: Caution

    10 directions for use directions for use the cabinet hood area under the backrest top is not designed for stor- age or as an area to hold accessories while with a client. Do not use this area for holding anything. Damage can occur to the table, especially when commands that are accessed by the hand ...

  • Page 13: Caution

    11 directions for use though the arm rests adjust automatically to remain parallel to the floor in any position, there will still be times when you will need to move an arm rest out of the way or remove them altogether. We recommend that you raise the arm rest out of the way to allow a client to get...

  • Page 14: Caution

    12 directions for use directions for use directions for use to remove one or both arm rests just take hold of the base of the arm rest at the metal frame and somewhere on the cushion. Holding securely, rotate the arm rest while at the same time pulling slightly away from the table. You will feel the...

  • Page 15

    Be sure to use either the face rest or head rest for all treatments that require your client to lay flat. Double articulating action provides nearly limitless positioning options with the quicklock™ face rest.The adjustable pad takes pressure off sensitive facial areas while providing superb support...

  • Page 16

    Directions for use moving the leo™ directions for use before doing any work on the table, disconnect the power cord from the power outlet and secure the electrical cord, and foot controls for moving. The table weighs as much as 200 lbs. Do not lift or move the unit without using proper safety proced...

  • Page 17: Caution

    Directions for use care & cleaning in order to maintain the quality and ensure the life of the table, here are some preventative steps that can be taken to protect the upholstery on the chair and accessories. • protect your table and accessories with sheets and fleeces. We offer both fitted sheets a...

  • Page 18

    16 product identification power lead plugs power lead plugs o akwork part #: voltage (ac) power cord plug 7791 120v 60 hz 3 prong grounded north america 7791-03 220v 50 hz continental plug; europe/italy 7791-04 220v 50 hz swiss plug; switzerland 7791-02 220v 50 hz british plug; united kingdom 7791-0...

  • Page 19

    17 specs & warranty specifications specifications & warranty electrical specifications designed for: north america europe japan/korea voltage/current service input frequency power consumption table actuator voltage electric shock protection mode of operation 120 vac/15 amps 60 hz tbd 24 vdc 220 vac/...

  • Page 20

    Manual part number mmmnst0015 revision date: 04.23.09 edition 1, english printed in usa i n s t r u c t i o n m a n u a l contact information: o akworks ® inc. 923 east wellspring road new freedom, pa 17349 toll free (usa only): 800-916-4613 phone: 717-235-6807 fax: 717-235-6798 www.Oakworks.Com leo...