Oasis 506335C User manual - page 6

6

Your new water dispenser features a water bottle cap with siphon tube that can accommodate either a 3 or 5 gallon 

(12 or 19 liter) water bottle. 

The water bottle cap and siphon tube assembly is shipped in it’s default confi guration for use with a standard 5 gallon 

(19 liter) bottle. For proper operation, make sure the collar of the water bottle cap is sealed tightly to the neck of the 

bottle. (Fig. 1)

To adjust the siphon tube length, squeeze the clips on the top of the water bottle cap together to release it from the 

collar. (Fig. 2)

Raise or lower the siphon tube to the proper depth into the bottle. (Fig. 3)

The water dispenser has 4 indicator lights on the front panel.

•    When the            indicator light is on, the dispenser has power.

•    When the            indicator light is on, the dispenser is heating water inside the heated water tank.

•    When the            indicator light is on, the dispenser is in the process of cooling water inside the cooling tank.

•    When the            indicator light is on, there is no water left in the water bottle and it needs to be replaced. 

     Replace the water bottle, and close the door to reset the dispenser. The dispenser will work again and the 

     indicator light will turn off .

Using the Water Dispenser

•    To dispense HOT water, slide the red safety lock to the left and press the hot water dispense button 

     all the way down.

•    To dispense ROOM TEMP water, press the room temp water dispense button all the way down.

•    To dispense COLD water, press the cold water dispense button all the way down.

LED DISPLAY PANEL

Fig. 1

Fig. 2

Fig. 3

ADJUSTING THE SIPHON TUBE FOR SMALLER BOTTLES

OPERATION