OBaby Disney Minnie Mouse Gliding Crib Instructions Manual - page 2
www.obaby.co.uk
Your child’s safety may be affected if you do not follow these instructions.
Thank you for choosing Obaby. This crib conforms to BSEN 1130-1:1997. To ensure that
your crib is used in accordance with these instructions, please read them fully.
A child’s safety is your responsibility.
When a child is able to sit, kneel or to pull itself up, the crib/cradle shall not be used
anymore for this child.
Young children should not be allowed to play unsupervised in the vicinity of the crib/
cradle.
that no screws are loose, because a child could trap parts of the body or
clothing (e.g. strings, necklaces, ribbons for babies dummies, etc.), which would
pose a risk of strangulation.
Do not use the body of the cradle without its frame.
WARNING:
The crib/cradle should be locked in the fixed position when a child is
unsupervsied in it.
WARNING:
Do not use the crib/cradle if any part is broken, or missing and use
only spare parts approved by the manufacturer.
WARNING:
Be aware of the risk of the open fires and other sources of strong heat,
such as electric bar fires, gas fires, etc. in the near vicinity of the
crib/cradle.
We recommend you use the Obaby Mattress Size 85 x 43cm for this crib/cradle.
The crib/cradle should be placed on a horizontal floor.
Safety Warnings
2
WARNING:
Cribs with self adhesive labels on the foot end & head end should
be assembled so artwork is outside the crib.
The thickness of the mattress chosen should be such that the internal height (surface
of the mattress to the upper edge of the crib/cradle frame) is at least 275mm.
One side of the crib has a mark indicating the max height of the mattress.