Important please read these instructions carefully before using this product keep for future reference instruction manual winnie the pooh buggy.
Safety warnings getting to know your buggy hood secondary release lock front swivel wheel levers shopping basket hood adjustment catch harness storage clip primary release locks brake levers backrest release thank you for choosing obaby. To ensure that your stroller is used in accordance with these ...
Opening your buggy to open your buggy release the storage clip on the side of the buggy (fig.1 & 2). Lift the handles away from the wheels (fig.3). Using your foot push down on at the back of the buggy (fig.4). Ensure the lock clicks into place (fig.5). Warning: ensure that all locking devices are e...
Fitting and removing the front wheels fig. 13 fig. 14 fig. 15 using the front swivel wheels to lock the swivel wheels, first ensure the front wheels are facing forward inline with the chassis, then lift the lever up (fig.16). To put the wheels in swivel mode, push the lever down on the front of each...
Fitting and removing the hood adjusting the hood fig. 24 fig. 27 fig. 25 fig. 28 fig. 26 fig. 29 to fold the hood, lift the hood adjusters up on both sides of the hood, as shown above. Fig. 30 fig. 33 fig. 31 fig. 34 fig. 32 fig. 35 using the harness press to fit the hood, place the hood on the chas...
Fig. 36 fig. 37 fig. 38 fitting the rainshield to fit the rainshield, place the rainshield over the front of the hood and allow the rainshield to drape over the front of the buggy. Fasten the press-studs on both sides of the hood (fig.36). Wrap the velcro straps around each front leg of the chassis ...
©disney based on the “winnie the pooh” works by a.A milne and e.H. Shepard..
