Important please read these instructions carefully before using this product keep for future reference lisa cot bed.
Page one www.Obaby.Co.Uk www.Obaby.Co.Uk thank you for choosing o baby. To ensure that your cot bed is used in accordance with these instructions, please read them fully and retain for future reference. If you have any problems please contact o baby - info@obaby.Co.Uk or 0845 078 0290 before assembl...
Page two www.Obaby.Co.Uk parts a. Allen key x 1 b. Long assembly screw x 8 c. Short assembly screw x 8 d. Barrel nuts x 16 cot bed head end & foot end panel (foot end has the o baby logo facing the outside of the cotbed) cot bed base fixed sides x 2 a b c d.
Page three www.Obaby.Co.Uk assembling your cot bed step 1 starting on one end of the base fit the barrel nuts in the holes provided on the base corners . Ensure the slits are facing the inside of the base. Step 2 decide how high you would like your base; - for a new born - to make it easier for the ...
Page four www.Obaby.Co.Uk assembling your cot bed step 4 now add the first side rail, starting by attaching the tops first. Put the barrel nut in the side rail, then thread the long screw through the cot end & then through the rail and tighten it up into the barrel nut. Do this on the other end of t...
Page five www.Obaby.Co.Uk changing the cot into a junior bed step 1 remove both side rails using the allen key. Only change into a junior bed when your are confident that you child will be safe without the side rails. Step 2 fit the base to the lowest level using the same fittings for the base that ...
Safe use & maintenance page www.Obaby.Co.Uk www.Obaby.Co.Uk instructions for safe use & maintenance read carefully before using this products & keep for future reference. - the lowest position for the cot base is the safest. This position should always be used once the baby is old enough to sit up. ...
