OBaby RIDER Instructions For Use Manual - page 7
4. Securing the ba
4. Securing the ba
4. Securing the ba
4. Securing the baby seat in the car
by seat in the car
by seat in the car
by seat in the car
NB: The baby seat may not be used on seats which are fitted with an
airbag. Disable the airbag if necessary.
- Always fit the baby seat facing against the direction of travel (1).
- Pull the lap restraint through the recesses provided (2).
- Click the end of the lap restraint in the buckle for the three-point
seat belt.
- Run the shoulder belt around the rear of the seat (3) and feed it
through the guide provided on the rear of the baby seat (4).
- Tighten the belt. Make sure that the belt is not twisted and that the
baby car seat is properly secured.
5. Adjusting the handle
5. Adjusting the handle
5. Adjusting the handle
5. Adjusting the handle
The handle has four possible positions:
1. Travelling position
2. Carrying position
3. Rocking position
4. Sitting position
To adjust the handle, press the buttons on both sides of the handle.
Now you can adjust the handle. Make sure that the handle engages
in the chosen position.
7