OBaby ZeZu Pramette Instruction Manual - page 3
Fitting and Removing the Wheels
Press
To fit the rear wheels, press the button in the centre of the wheel (fig.7). Slide the wheel
shaft into the hole on the frame and release the button (fig.8 & 9).
To remove the rear wheels, press the button in the centre of the wheel (fig.7) and simply
slide the wheel out.
To fit the front wheels, simply slide each wheel into the receivers on the front of the
frame (fig.10) until they click into place (fig.11).
To remove the front wheels, press the button at the rear of each wheel (fig.12) and pull
away from the frame.
fig. 7
fig. 10
fig. 8
fig. 11
fig. 9
fig. 12
Unfolding and Folding your Pramette
To unfold your pramette, release the storage catch on the side of the frame, by
unhooking the catch from the stub on the frame (fig.1 & 2).
Lift the handle up away from the wheels (fig.3) until it clicks into place (fig.4).
To fold your pramette, release the primary lock by pressing the button on the right side
of the frame. While keeping this button pressed, release the secondary lock by lifting
both catches on either side of the frame (fig.5). Lower the handle towards the wheels
(fig.6) and check the storage catch has engaged.
The wheels can be removed if you wish (see page 5 for details).
fig. 1
fig. 4
fig. 2
fig. 5
fig. 3
fig. 6
1.Press
2.Lift
2.Lift
Lift
Lower
“Click”
“Click”
Press
WARNING:
Ensure that all locking devices are engaged before use
4
5
www.obaby.co.uk
www.obaby.co.uk