Obadiah's Wood Stoves 1500 Installation And Operator's Manual - Section 2: Stove Glass
5
800-968-8604
Section 2: Stove Glass
Tools Required:
3/16” Allen Wrench & Knife
Materials:
High·Temperature Glass
6 ft. of 1/8” x 1” Gasket with Adhesive
Glass Installation
1. Glass can be installed in the door opening with the door on the stove.
2. Remove bracket bolts from the door.
3. Remove backing from the gasket. Center gasket on edge of glass. Firmly press onto
glass edge and all sides. Cut excess gasket.
4. Place glass in opening.
5. Position brackets in place, insert bolts and tighten carefully.
Caution: Glass should be snug, but not excessively tight.
Use and Care of Glass
Although glass has excellent heat resistance and strength characteristics, it can crack
through improper use. To achieve maximum utility and safety of glass In a wood burning
stove, we advise the following:
1. Inspect the glass regularly. if you detect a crack or break, extinguish the fire im-
mediately and replace glass.
2. Do not slam the door or otherwise impact the glass. When closing the door, logs or
other objects should not protrude or impact the glass.
3. Do not clean the glass with materials which may scratch or damage the glass.
Scratches on the glass can develop into cracks or breaks. Oven cleaner may be
used, but do not get any on the paint as it will remove paint.
4. Never put substances which can ignite explosively in the stove since even small
explosions in confined areas can blowout the glass.