1 ac-2300 cc-2300/2400 series tripod you’re on steady ground ™.
2 thank you for choosing oben! Congratulations on your purchase of this sturdy, multi-featured oben ac-2300/cc-2300/cc-2400 series tripod. It will deliver lightweight, rock-solid support for your camera for years to come. Adjusting the tripod’s height is simple: just open the flip locks to extend or...
3 key features 5 leg length adjustment 6 leg angle adjustment 6 center column adjustment 7 low-angle setup 7 counterweight 9 mounting the head 9 retractable spiked feet 10 warnings 11 table of contents.
4 a e l i j g d key features b c h k f.
5 center column locking knob short split-column grooved reversible center column head locking screws leg angle adjustment lock flip-style leg lock levers bubble level all-terrain feet dual 3/8”-1/4”-20 head mounting screw strap mount retractable and removable weight hook rubberized non-slip leg warm...
6 operation a flip-lock design allows you to quickly change the height of each telescopic tripod leg. To adjust the height of a leg: push the lever open, position the leg at the desired height, and push the lever closed to lock the leg in place. Each flip lock includes an allen screw that can be tig...
7 operation operation there are two ways to adjust the tripod for low-angle shots. Reverse the center column 1. Remove the built-in weight hook from the bottom of the column by turning it counterclockwise and pulling it out of the column. 3. Center column adjustment 4. Low-angle setup the sliding ce...
8 operation 4. Low-angle setup 2. Turn the center column locking knob counterclockwise to unlock the center column. Remove the center column from the tripod. 3. Reverse the center column and insert it up the bottom of the tripod top plate. 4.Slide the column into the desired position. Turn the cente...
9 operation 5. Counterweight when shooting under windy conditions or when using a telephoto lens, the stability of your camera is critical. The built-in spring-loaded hook at the bottom of the center column allows you to hang a counter- weight for increased stabilization, such as a (not included) sa...
10 7. Retractable spiked feet* 6. Mounting the head the top plate on oben tripods is equipped with three set screws which clamp against the base of the tripod head to ensure effective and secure locking of the head to the tripod. Callouts leg angle adj center clm adj attaching head low angle adj 180...
11 warnings ! Warnings: • do not exceed the tripod’s maximum load capacity (see tag on tripod). • ensure that all appropriate locks are engaged when necessary. • tripod should only be used in temperatures between -22° and 140° fahrenheit. • do not operate in salt water. Dry tripod off if it becomes ...
12 www.Obensupports.Com © cop yright 2014 the gr adus gr oup all o ther tr ademark s ar e the pr oper ty o f their r espec tiv e o wner s.
