Oboni LS22D1000 Operation Manual - Connection And Setup

Connection and Setup 

Cable Installation                                                                                                                         

installation and use. 

1. Take out the TV from the package and put it in a drafty and flat place. 

NOTE: 

signal cable, please hold the plug (the insulated part), do not draw the body

 of the cable. 

2. The RF output terminal can be connected with the RF input port of the TV. 

3. The output AV terminal of DVD can be connected with the AV input port of the TV 

through  AV cable. 

NOTE: 

4. The output COMPONENT (YPbPr) terminal of DVD can be connected with the 

COMPONENT (YPbPr) input port of the TV through AV cable. 

5. Connect one end of the VGA cable with the VGA port on computer, connect the other 

end 

each end of VGA cable. 

NOTE: 

the pin might be broken. 

HDMI cable with the HDMI port on the TV. 

NOTE: 

the pin might be broken. 

8. Sending the TV's audio signal to external audio equipment via the Digital Audio         

Output port. 

9. Check and make sure that all AV cables are connected with the corresponding ports 

correctly.

10. Connect the power cable with 100-240V~ power supply. 

NOTE: 

 The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV 

power input port with the power cable out of the above range. 

not touch directly the metallic part of the cable. 

Please read the relevant content in “Warning and Safety instructions” carefully before

 the 

 When you plug or unplug the TV, computer or other equipment, you must make

 sure that the power cable has been already shut down; when unplugging the power 

cable or 

 Component and AV can not be used at same time for they share of one audio 

channel. 

of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on 

the 

 While connecting the 15-pin VGA, please do not insert the plug overexerted, for 

fear 

6. Connect one end of the HDMI cable with HDMI output port; connect the other end of 

the 

 While connecting the HDMI, please aim at carefully, do not insert overexerted, for 

fear 

 Please hold the insulated part of the plug when you are unplugging the power cable, 

do

If COMPONENT (YPbPr) and AV works as mini terminal, and shared same audio,   

please choose to use a one-to-three audio&video cable. 

8

E

nglish

7. Connect SCART socket input or output from an external device to these jacks.