1. DL manuals
  2. Observint
  3. Security Camera
  4. CD600 Series
  5. User Manual

Observint CD600 Series User Manual

Manual is about: Infrared Turret Dome Camera

Summary of CD600 Series

  • Page 1

    Infrared turret dome camera user manual products: cd600 series, cd601 series, cd700 series cameras please read this manual before installing and using this camera and always follow instructions for proper use. Save this manual for future reference. Cd600-cd601-cd700_cm 11/14/13.

  • Page 2: Warning

    Warning ! Do not use the camera if it is emitting fumes, smoke or a strange odor, or if it seems to function abnormally. Disconnect the power source immediately and consult your supplier. Caution always follow the instructions in the installation guide when applying power. Fire and equipment damage ...

  • Page 3: III

    Iii infrared turret camera user manual warnings & cautions caution to prevent damage, do not drop the camera or subject it to strong shock or vibration. Caution if installed close to a tv, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may interf...

  • Page 4: Table Of Contents

    Iv www.Observint.Com table of contents table of contents section 1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 camera components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 camera connections ....

  • Page 5: Section 1: Features

    1 infrared turret camera user manual section 1: features section 1 features the cd600, cd601, and cd700 series cameras are weatherproof, vandal resistant turret dome cameras, ideal for outdoor or indoor locations where surveillance in low-light environments is required. These cameras include: • adva...

  • Page 6: Section 1: Features

    2 www.Observint.Com section 1: features 1.1 camera components drop cable video 75 ohm 12 v dc base bezel camera housing camera module zoom adjust (-vf models) camera lens ir leds camera assembly.

  • Page 7: Section 1: Features

    3 infrared turret camera user manual section 1: features 1.2 camera connections connect connect single camera with monitor multiple camera system with dvr and monitor.

  • Page 8: Section 2: Installation

    4 www.Observint.Com section 2: installation section 2 installation 2.1 what’s in the box the camera package contains: • camera assembly • instruction manual • hardware kit, including four screws and four wall inserts 2.2 tools you need to install the camera, you will need: • phillips #2 screwdriver ...

  • Page 9: Section 2: Installation

    5 infrared turret camera user manual section 2: installation 2.3 installation instructions 1. Separate the base from the rest of the camera assembly by unscrewing the housing bezel. Bezel remove the bezel 2. Determine where the camera will be mounted..

  • Page 10: Section 2: Installation

    6 www.Observint.Com section 2: installation 3. Using the base as a template, mark the location of the four mounting screw holes. Mounting screw hole camera base 4. Drill mounting screw holes into the mounting surface. A. If the mounting surface is a soft material, such as a drywall, use a 3/16” bit ...

  • Page 11: Section 2: Installation

    7 infrared turret camera user manual section 2: installation 5. Drill mounting screw holes into the mounting surface. A. If the mounting surface is a soft material, such as a drywall, use a 3/16" bit to drill the mounting holes. Use a hammer to tap the wall inserts provided into each hole until they...

  • Page 12: Section 2: Installation

    8 www.Observint.Com section 2: installation cable channel in base 7. Drill a 3/4" hole through the mounting surface at the center of the base. 3/4" drop cable routing hole use a #2 phillips screwdriver to mount the base with the provided screws..

  • Page 13: Section 2: Installation

    9 infrared turret camera user manual section 2: installation 8. With the camera in the camera housing, route the drop cable through the 3/4" hole until the camera housing is fitted onto the base. Place the housing bezel over the camera housing and screw it onto the base until the camera and camera h...

  • Page 14: Section 2: Installation

    10 www.Observint.Com section 2: installation reassemble camera.

  • Page 15: Section 2: Installation

    11 infrared turret camera user manual section 2: installation 12. Attach the bnc video/power cable to the camera cable as required. Caution notice that power connectors on the bnc video/power cable are different at each end! Connect to dvr/monitor and power to dvr/monitor and power cable attachment.

  • Page 16: Section 2: Installation

    12 www.Observint.Com section 2: installation 2.4 osd setup (cd700 series only) cd700 series cameras include on-screen display (osd) software for adjusting the internal camera settings to complement specific environment where it is installed. These settings are adjusted using the osd controller attac...

  • Page 17: Section 2: Installation

    13 infrared turret camera user manual section 2: installation osd menu options osd set lens manual auto type: dc / video mode: close / auto/open speed: 0-255 shutter/ agc auto high luminance mode: shut+auto iris / auto iris brightness: 0-255 low luminance mode: off / agc brightness: ×0 .25, ×0 .5, ×...

  • Page 18: Section 2: Installation

    14 www.Observint.Com section 2: installation osd set (cont .) motion det off -- on detect sense / block disp / monitor area / area sel / top / bottom / left / right privacy off -- on area sel / top / bottom / left / right / color / transp / mosaic day/night color -- b/w burst: off / on auto burst: o...

  • Page 19: Section 3

    15 infrared turret camera user manual section 3: aiming the camera section 3 aiming the camera 1. Connect the video cable from the camera to a test monitor or to the bnc input on the dvr. 2. Apply 12 vdc power to the camera to power it on. 3. Unscrew the bezel until the camera module and housing can...

  • Page 20: Section 4: Cleaning

    16 www.Observint.Com section 4: cleaning section 4 cleaning clean the camera lens and ir lamp shield with an approved glass cleaning solution and a lint free cloth. • dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub the surface with a soft cloth moi...

  • Page 21: Section 5: Specifications

    17 infrared turret camera user manual section 5: specifications section 5 specifications model cd600w, cd600b cd601w, cd601b cd601wvf, cd601bvf sensor 1/3" cmos 1/3" sharp ccd 1/3" sharp ccd effective picture elements (h×v) 728 (h) x 488 (v) 768 (h) x 494 (v) 768 (h) x 494 (v) horizontal resolution ...

  • Page 22: Section 5: Specifications

    18 www.Observint.Com section 5: specifications model cd700w, cd700b cd700wvf, cd700bvf sensor 1/3" sony super-had ccd ii 1/3" sony super-had ccd ii effective picture elements (h×v) 976 (h) x 494 (v) horizontal resolution 700 tv line minimum illumination 0.001 lux f1.2 / 0 lux (with ir led on) 0.001 ...

  • Page 23: Section 6: Troubleshooting

    19 infrared turret camera user manual section 6: troubleshooting section 6 troubleshooting before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult your supplier. 1. No picture on the monitor...