Observint CD80B User Manual

Manual is about: Infrared Turret Dome CCD Camera

Summary of CD80B

  • Page 1

    Infrared turret dome ccd camera user manual products: cd80b, cd80w, cd80bhr, cd80whr, cd80bvf, cd80wvf, cd80bhrvf, cd80whrvf please read this manual before installing and using this camera and always follow instructions for proper use. Save this manual for future reference. Cd80_im 1/10/13.

  • Page 2: Warning

    Warning ! Do not use the camera if fumes, smoke or a strange odor is emitted from the unit, or if it seems to not function correctly. Disconnect the power source immediately and consult your supplier. Caution always follow the instructions in the installation guide when applying power. Fire and equi...

  • Page 3: III

    Iii infrared turret ccd camera user manual warnings & cautions caution to prevent damage, do not drop the camera or subject it to strong shock or vibration. Caution if installed close to a tv, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may in...

  • Page 4: Table of Contents

    Iv www.Observint.Com table of contents table of contents section 1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 camera components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 camera connections ....

  • Page 5: Section 1: Features

    1 infrared turret ccd camera user manual section 1: features section 1 features the cd80 series weatherproof, vandal resistant turret dome cameras are ideal for outdoor locations where surveillance in low-light environments is required. These cameras include: • advanced image sensors for greater pic...

  • Page 6: Section 1: Features

    2 www.Observint.Com section 1: features 1.1 camera components drop cable video 75 ohm 12 v dc base bezel camera housing bezel set screw (2) camera module focus adjust (vf models) camera lens ir leds camera assembly.

  • Page 7: Section 1: Features

    3 infrared turret ccd camera user manual section 1: features 1.2 camera connections connect connect single camera with monitor (above) multiple camera system with dvr and monitor (below).

  • Page 8: Section 2: Installation

    4 www.Observint.Com section 2: installation section 2 installation 2.1 what’s in the box the camera package contains: • camera assembly • instruction manual • hardware kit, including four 1" screws, four wall inserts and a hex wrench 2.2 tools you need to install the camera, you will need: • phillip...

  • Page 9: Section 2: Installation

    5 infrared turret ccd camera user manual section 2: installation 2.3 installation instructions 1. Use the hex wrench provide to loosen the two bezel set screws, then remove the bezel from the camera assembly. Bezel set screw (1 of 2) remove the bezel 2. Determine where the camera will be mounted. 3....

  • Page 10: Section 2: Installation

    6 www.Observint.Com section 2: installation mounting screw holes camera base 4. Drill mounting screw holes into the mounting surface. A. If the mounting surface is a soft material, such as a drywall, use a 3/16" bit to drill the mounting holes. Use a hammer to tap the wall inserts provided into each...

  • Page 11: Section 2: Installation

    7 infrared turret ccd camera user manual section 2: installation b. If the mounting surface is a very soft material, such as ceiling tile, place a wood block behind the tile. Screws longer than 1" may be required. Drill holes for the mounting screws through the surface and into the wood block. Or c....

  • Page 12: Section 2: Installation

    8 www.Observint.Com section 2: installation 3/4" cable routing hole 7. Use a #2 phillips screwdriver to mount the base with the provided screws. 8. With the camera in the camera housing, route the drop cable through the 3/4" hole until the camera housing is fitted onto the base. Place the housing be...

  • Page 13: Section 2: Installation

    9 infrared turret ccd camera user manual section 2: installation 10. Use a #2 phillips screwdriver to mount the base with the provided screws. 11. Without allowing the camera to hang by the drop cable, place the camera module onto the base, cover with the camera housing, then move the bezel into pla...

  • Page 14: Section 2: Installation

    10 www.Observint.Com section 2: installation caution notice that power connectors on the bnc video/power cable are different at each end! Connect to dvr/monitor and power to dvr/monitor and power cable attachment.

  • Page 15: Section 3: Aiming The Camera

    11 infrared turret ccd camera user manual section 3: aiming the camera section 3 aiming the camera 1. Connect the video cable from the camera to a test monitor or to the bnc input on the dvr. 2. Apply 12 vdc power to the camera. 3. Loosen the bezel set screws until the camera module and housing can ...

  • Page 16: Section 4: Cleaning

    12 www.Observint.Com section 4: cleaning section 4 cleaning clean the camera lens and ir lamp shield with an approved glass cleaning solution and a lint free cloth. • dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub the surface with a soft cloth moi...

  • Page 17: Section 5: Specifications

    13 infrared turret ccd camera user manual section 5: specifications section 5 specifications model cd80b / cd80w cd80bhr / cd80whr cd80bvf / cd80wvf cd80bhrvf / cd80whrvf image sensor 1/4" sharp ccd 1/3” sony ccd 1/4” sharp ccd 1/3” sony ccd tv system ntsc ccd total pixels 537 (h) x 505 (v) 811 (h) ...

  • Page 18: Section 6: Troubleshooting

    14 www.Observint.Com section 6: troubleshooting section 6 troubleshooting before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult your supplier. 1. No picture on the monitor screen. A. Check...

  • Page 19: Section 6: Troubleshooting

    15 infrared turret ccd camera user manual section 6: troubleshooting 2. The picture has interference. A. The camera may be close to a high voltage source, such as a power generator. B. The bnc cable is not terminated properly. C. The video cables are not connected properly. Caution this camera is a ...

  • Page 20

    16 www.Observint.Com.