- DL manuals
- Océ
- All in One Printer
- PlotWave 340
- User Manual
Océ PlotWave 340 User Manual
Summary of PlotWave 340
Page 1
- o océ plotwave 340/360 touch the new way of printing user manual operating information.
Page 2
Copyright © 2013 océ. All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from océ. Océ makes no representation or warranties with respect to the contents hereof and specifi- cally disclaims any implied w...
Page 3: Trademarks
Trademarks océ, océ plotwave 340/360, océ express webtools, océ publisher express, océ publisher mobile, and océ mobile webtools are registered trademarks of océ. Adobe ® , acrobat ® , reader ® are registered trademarks of adobe ® systems incorporated. Microsoft ® , windows ® , windows xp ® , window...
Page 4: Contents
Contents chapter 1 introduction....................................................................................................... 11 notes for the reader................................................................................. 12 available documentation.....................................
Page 5
The cloud............................................................................................. 69 chapter 3 define your workflow with océ express webtools..................................... 73 introduction........................................................................................
Page 6
Access control and ipsec settings............................................. 131 remote security.......................................................................... 133 remote security: generate a ca-signed certificate request.... 134 remote security: import a ca-signed certificate.............
Page 7
What you need to know before you start a job................................... 186 how to feed an original......................................................................... 188 how to auto-feed an original................................................................. 190 how to use the ca...
Page 8
Scan presets on the user panel....................................................... 256 scan a photo to 'jpeg' format........................................................ 257 scan cad color to 'tiff' format...................................................... 258 scan to a usb mass storage dev...
Page 9
Install a new license............................................................................... 334 chapter 7 account management.................................................................................... 337 an overview of océ account center................................................
Page 10
10 contents operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 11
Chapter 1 introduction operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 12: Notes For The Reader
Notes for the reader introduction this manual helps you to use the océ plotwave 340/360. The manual contains a descrip- tion of the product and guidelines to use and operate the océ plotwave 340/360. Definition attention-getters parts of this manual require your special attention. These parts can pr...
Page 13
Indicates icon word moving parts caution laser beam caution the use of heat-resistant gloves is mandatory when you carry out these actions. Safety information before using this océ product, make sure that you read and understand the safety infor- mation which is part of the user documentation. You c...
Page 14: Available Documentation
Available documentation introduction this manual is part of a complete documentation set. The following table shows a complete overview of the available documentation. Note: for up-to-date documentation, visit océ on the internet and find all the information on your printer on the support page. Avai...
Page 15
Availability documentation • on the océ website (http://glob- al.Oce.Com) under the plotwave support page. Available as a pdf file in english only. Océ large format systems connec- tivity - administration guide • on the océ website (http://glob- al.Oce.Com) under the plotwave support page. Available...
Page 16
Available documentation océ publisher select # availability documentation • on the océ website (http://glob- al.Oce.Com) under the plotwave support page. Available as a pdf file in multiple lan- guages. User guide - océ publisher select • embedded in the application available in multiple languages. ...
Page 17
Chapter 2 get to know the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 18: Introduction
Introduction the océ plotwave 340/360 introduction the océ plotwave 340/360 is a black and white, all-in-one wide format print, copy and scan system with a multi-touch user panel and an optional color scanner. Illustration chapter 2 - get to know the printing system 18 the océ plotwave 340/360 opera...
Page 19: The Key Concepts
The key concepts introduction the océ plotwave 340/360 features several concepts that make the printer unique. An understanding of these main concepts is key to optimally profiting from your plotwave system. Printer configuration the océ plotwave 340/360 printer has 1 or 2 media rolls. The 'océ scan...
Page 20
Print functionality the océ plotwave 340/360 supports printing from various applications and drivers. Create and send jobs from optional drivers or mobile devices. Feel free to start multiple jobs at one time since the océ plotwave 340/360 allows neatly collated and stacked documents of up to 50 a0/...
Page 21
Presets predefined settings: presets, listed on the user panel, help to edit the job settings for copy, scan and print jobs. Presets give easy access to change the most common used settings. To start a job with different settings, you simply select a job tile, select the preferred presets and tap th...
Page 22
Spool memory the océ plotwave 340/360 contains a spool memory that provides a queuing system for documents you want to print or copy. The spool memory allows multiple users to send print and copy jobs to the océ plotwave 340/360 at the same time. The print and copy jobs are then placed in the print ...
Page 23: Working Area [Footprint]
Connect your printing system working area [footprint] the printing system (with or without the optional 'océ scanner express') requires a floor space / working area of at least 1810 mm x 1470 mm (71,3 inch x 57.9 inches). 172cm 67.7” 181cm 71.3” 7cm 2.8” 147cm 57.9” 9cm 3.5” 60cm 23.6” 80cm 31.5” ch...
Page 24
Connect the mains supply cable and the network cable attention: make sure the power switch(b) is in the off position. 1. Plug the power supply cable into the power connection at the back of the printer (a) (on the left-hand side). A b c 2. Plug the other side of the mains supply cable into the wall ...
Page 25
Switch on the printing system attention: make sure the power supply cable (a) is plugged in. Attention: make sure the network cable (c) is plugged in. 1. Switch on the power switch at the back of the printing system (b). A b c [13] the power switch at the back of the printer. Chapter 2 - get to know...
Page 26: The Hardware
The hardware the components of the printer (front) illustration 8 7 1 2 3 4 9 10 11 12 6 5 component - function table # description / function component no. Remove this cover when you want to move the printer. Lower left front cover 1 located at the front, used for error recov- ery. Lower front cove...
Page 27
Description / function component no. Usb connector to use a usb mass storage device to print from or to scan to. Usb port 7 the océ clearconnect user panel allows the user to start copy, scan or print jobs and to monitor the system and the job status. Océ clearconnect: multi-touch user panel 8 media...
Page 28
The components of the printer (left side) illustration 1 component - function table # description / function component no. Gives access to the residual toner container. Residual toner compartment 1 chapter 2 - get to know the printing system 28 the components of the printer (left side) operating inf...
Page 29
The components of the printer (back) illustration 3 1 2 component - function table # description / function component no. Switch the main power supply on or off. You can find the serial number of the printer on the sticker above the power switch. Power switch 1 open the upper back cover with the med...
Page 30: The Media Drawer
The media drawer illustration 1 2 3 5 4 component - function table # description / function component no. Carries the media roll roll holder 1 media placed on roll holder in first position. Media roll 1 2 media placed on roll holder in second position. Note: the scanner calibration sheet is located ...
Page 31
The user panel: océ clearconnect illustration components of the océ clearconnect # description / function component no. Light that gives feedback on the status of the printer. Status light 1 button that allows the operator to get the printer out of sleep mode. Wake-up button 2 port to insert a usb m...
Page 32
Note: for more information on the océ clearconnect, see ‘introduction to océ clearconnect’ on page 41 . Chapter 2 - get to know the printing system 32 the user panel: océ clearconnect operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 33: The Output Delivery
The output delivery introduction the printer is equipped with a top delivery tray to collect your printed output. Illustration how to define the output delivery in océ express webtools and under 'all settings' on the user panel, you can define the default 'sheet delivery' for your printed output. • ...
Page 34
Compatible with the 'top delivery tray' media name yes 'bond 17 lb' yes 'bond 20 lb' yes 'bond 20 lb' yes 'recycled bond 20 lb' yes 'bond 24-28 lb' yes 'transp. 20 lb' yes 'transp. 24 lb' yes 'transp. 28 lb' other media # compatible with the 'top delivery tray' media name no, delivered to the 'back ...
Page 35
The components of the scanner (optional) note: the scanner calibration sheet for the 'océ scanner express' is located in the media drawer at the back of roll 2. Illustration 1 4 3 2 5 [20] the integrated scanner. The components of the scanner # description / function component closes off the scanner...
Page 36
The front original tray (optional) introduction the printer can be delivered with a front original tray to hold and collect your originals. When you want to scan multiple originals, the tray can hold your originals. It also makes sure that your originals do not fall on the floor or get damaged when ...
Page 37
[22] position 2 - access the media drawer position of the front original tray # description / function position in this position the front original tray holds and receives originals. 1 in this position, you can access the media drawer. You can lower the front original tray easily when you push it do...
Page 38: The Folder (Optional)
The folder (optional) introduction the printer can be delivered with an external folder. The océ plotwave 340 is compatible with the océ 2400 fanfold. The océ plotwave 360 is compatible with the océ 2400 fanfold and the océ 4311 fullfold. Note: a technician is required to install the folder and conf...
Page 39
Compatible with the folder media name yes 'bond 24-28 lb' note: for folding speed reasons, the outputs longer than 1.2 m (47.2 in) must be printed one sheet at a time. Chapter 2 - get to know the printing system 39 the folder (optional) operating information: plotwave (pw) 340, pw350 - edition 2013-...
Page 40
The printing system consumables # description consumable part consumable the roll consists of a core and the media. The media should be placed loose on its core. There are many different compatible me- dia types and sizes. For more information, see ‘preferred océ media types and sizes’ on page 316 ....
Page 41: Panel
Océ clearconnect: the multi-touch user panel introduction to océ clearconnect introduction the océ clearconnect is the user panel of your printer. The océ clearconnect is a multi-touch user panel with dynamic tiles for print, copy and scan jobs. The océ clearconnect # function component light that g...
Page 42
Function component the button that allows the operator to do the following: • get the printer out of sleep mode. • wake the printer up to full functionality. 2. Wake-up button you can insert a usb mass storage device to: • print a file directly from the usb mass storage device. • scan an original an...
Page 43: The Home Screen
The home screen introduction the default screen of the océ clearconnect is the home screen. From the home screen you can manage copy, scan and print jobs. You can enter the system menu to manage media and the printer setup and you can see the active job and the jobs waiting in the queue in the dynam...
Page 44
Function component no. In the dynamic bar, you can access the system menu. • when you tap the system thumbnail, a new window opens with a dynamic view of the system and printer setup settings. System menu 2. These dynamic tiles help you to perform copy, scan and print jobs. • when you tap one of the...
Page 45: The Smart Access
The smart access introduction the océ clearconnect gives easy access to your print, copy and scan jobs and supports the green button approach via the smart access. The smart access is the dynamic lower section of the user panel. The smart access enables you to quickly start your job without the need...
Page 46
Function component the scan smart access tap the scan tile on the user panel to view the copy smart access. The smart access has the following functionalities: # function component select the location you want to send your scanned file to. You can swipe through the list of various locations, from sm...
Page 47
# function component select the location you want to retrieve your unprinted job from. You can swipe through the list of various locations, from smart inboxes, usb, eneo or cloud locations. 1. Locations tap the green button to start the job. 2. Green button chapter 2 - get to know the printing syste...
Page 48
Presets and advanced settings introduction presets give you easy access to change the most commonly used settings. Advanced settings help you to fine-tune the settings of your job and give access to all settings. When you tap the copy tile or scan tile in the home screen, a window with copy or scan ...
Page 49
The presets and advanced settings # function component n o . The preset tiles show the default settings for your job. • the presets are divided into categories, such as 'media' and 'layout'. • when you tap a preset tile, it gives quick access to a short list of other presets you can choose. Preset t...
Page 50
Function component n o . When you tap 'all settings', a list with all the advanced settings opens. • the advanced settings are categorized and presented as tiles. • when you tap a tile, you can fine-tune the settings. 'all settings' (advanced settings) 3. Chapter 2 - get to know the printing system ...
Page 51: The Settings Concept
The settings concept introduction the multi-touch user panel offers the possibility to make settings for your job locally. There are two levels when you want to change settings on the user panel: • presets: are a combination of settings that are used often. It takes only a few steps to make new sett...
Page 52
Illustration description • 'media', 'layout', 'image' and 'finishing' are the categories for 'copy' and 'print'. • 'file type', 'file size' and 'image' are the cate- gories for 'scan'. • per preset category, the default setting is visible in the preset tile. When you tap the tile, a short list with ...
Page 53: The Locations
The locations introduction when you tap the print tile on the user panel twice, a window with locations opens. When you tap the scan tile, the locations are shown in the smart access. Location tiles can be: • the smart inboxes location. Default and always presented. When you tap the smart inboxes ti...
Page 54
1. The locations # function the external locations are presented as smart inboxes, usb or as the remote locations you created in océ express webtools. 2. Preview thumbnail # function when you open a location folder, a window opens with files listed as jobs. The print jobs have a preview thumbnail. T...
Page 55
3. Job settings # function when you open a location folder, a window opens with files listed as jobs. The jobs are listed with the job settings. Tap the job settings to open the window with presets and advanced settings. You can make changes here before you print the job. Chapter 2 - get to know the...
Page 56: Job Preview
Job preview introduction the multi-touch user panel offers a detailed preview of your job. Touch the preview thumbnail to access the preview window. Job preview # function component you can pan the image to see it in more detail. You can shift between the various job files that are part of one locat...
Page 57
The jobs queue and the system menu introduction the dynamic bar is located in the upper part of the home screen on the user panel display. The dynamic bar consists of the active job with the jobs queue and the system menu. The active job and the jobs queue # function component no. Job information of...
Page 58
Function component no. Tap on the active job to open the jobs queue window. • see all the listed jobs and access them when you tap the job settings. • move the listed jobs up or down the list with the arrows on the right side. Jobs queue 3. System menu # function component no. • the loaded media in ...
Page 59
Function component no. The setup menu gives general information on the printer. In the list you can get access to: • 'test prints' • 'network settings' • 'security' • 'print density' • 'clear system' • 'install additional hardware' • 'scanner calibration' setup menu 2. Chapter 2 - get to know the pr...
Page 60: Quick Start: Default Jobs
Quick start: default jobs the smart inbox process for copy, scan and print jobs introduction use the smart inbox to manage and store your jobs. Define one or more smart inbox names that allow you to easily organize and access your jobs. With the océ plotwave 340/360: • the smart inbox can not only b...
Page 61
Scan jobs and the smart inbox # location description function user panel scan a document on the printer; the public smart inbox is the default location you scan to. Choose another smart inbox as your location in the smart access of the user panel. 1. Scan a job to a smart inbox user panel open the s...
Page 62
Print a job # location description function user panel when you have sent the job, go to the printer and find your job in the smart inbox. Change the settings and tap the green button to print your job. Via the smart access in the home screen, you can also view all the other unprinted jobs. Se- lect...
Page 63: Do A Default Copy Job
Do a default copy job introduction when you want to copy an original and you do not make any settings, the default presets are used. You only use the smart access to submit your job. You can see the presets that are used in the job settings section of your job. Illustration do a default copy job 1. ...
Page 64
The 'copy' tile with the copy smart access is automatically selected on the user panel. 2. Select the number of copies and tap the green button. Note: tap on 'release the original' under the smart access to release your original from the scanner. Result a copy of your original is made. Collect your ...
Page 65: Do A Default Scan Job
Do a default scan job introduction when you want to scan an original and you do not make any settings, the default presets are used. You only use the smart access to submit your job. You can see the presets that are used in the job settings section of your job. Illustration do a default scan job 1. ...
Page 66
2. Select the 'scan' tile on the user panel. The scan smart access is visible. 3. Select the preferred location in the smart access and tap the green button. Note: when you do not select a location, the file is sent to the public smart inbox. Note: tap on 'release the original' under the smart acces...
Page 67: Do A Default Print Job
Do a default print job introduction when you want to print a job and you do not make any settings, the default presets are used. You only use the smart access to start your job. You can see the presets that are used in the job settings section of your job. Before you begin make sure you submit a job...
Page 68
2. Select the location of your job. Default, the public smart inbox. The jobs are listed in a new window. 3. Select your job from the list. 4. Tap the green button next to the job settings. Result a print of your file is made. Collect your document from the 'top delivery tray'. Chapter 2 - get to kn...
Page 69: The Cloud
The cloud introduction the multi-touch user panel gives the user the opportunity to print from and scan to various locations. One of these locations is the cloud. You can enter the cloud via 'webdav' and use it as a network drive. This way, the cloud application of your choice is accessible. Note: f...
Page 70
Illustration concept of the cloud the cloud can be seen as a virtual network drive you use to send files to, but also to save and share files on. There are general cloud applications, such as sharepoint or applications via a http url, but companies can also use their own private and internal clouds....
Page 71
Via description procedure pc or mobile device • - open the cloud application locally. For print jobs: pc or mobile device - add and save the file you want to print to the cloud. Or send your file to the printer in the cloud. Printer user panel - open your cloud application as location in the smart a...
Page 72
Chapter 2 - get to know the printing system 72 the cloud operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 73
Chapter 3 define your workflow with océ express webtools operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 74: Introduction
Introduction océ express webtools introduction océ express webtools is an application that runs embedded on your printer. You can use an internet browser (microsoft ® internet explorer or mozilla firefox) to open the home page of océ express webtools on your computer or mobile device. Definition you...
Page 75: The System Requirements
The system requirements introduction you can use an internet browser to open the home page of océ express webtools. De- pending on the internet browser you use, you must set the required minimum browser security settings as indicated below. Set the minimum browser security settings for internet expl...
Page 76
Value action step content 3 disable block pop-up windows enable load images automatically enable enable javascript chapter 3 - define your workflow with océ express webtools 76 the system requirements operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 77: The 'Jobs' Tab
The 'jobs' tab illustration the 'jobs' tab remote control of the system's workflow. Create a new job in the océ publisher express section. • when you want to submit a new job, click 'create new job'. A new window opens, where you can define some basic job settings and browse the file you want to pri...
Page 78
• when you click 'open smart inbox' and enter a name, the new smart inbox imme- diately appears in the smart inbox overview. This smart inbox is used for print jobs and is only visible on your local browser. When you send a print job via the smart inbox, the smart inbox is also shown on the user pan...
Page 79: The Smart Inbox
The smart inbox definition a smart inbox helps you to manage customized jobs. You get an overview of the smart inboxes when you open the 'jobs' tab in océ express webtools. Illustration [51] the 'jobs' tab. Jobs in a smart inbox you can use the smart inbox to manage your jobs. Define one or more sma...
Page 80
• scan jobs, when you select the smart inbox as your location. When you make a scan on the printer and you select the smart inbox as the external location to send your job to, you can collect the job from the selected smart inbox in océ express webtools. Under the 'jobs' tab, you can select the job ...
Page 81: The Job States
The job states introduction when a job is placed in a smart inbox or in the queue, the icon in front of the job name gives information about the status of the job. Overview of the job states in the smart inbox # description icon state indicates that the 'smart inbox' is receiving the job data. Recei...
Page 82
Description icon state general error message. Attention needed chapter 3 - define your workflow with océ express webtools 82 the job states operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 83: The 'System' Tab
The 'system' tab illustration the 'system' tab your remote view on the system. This tab can be accessed by any user. The 'system' tab is visible on all pages at the bottom of the page. When you click on the 'system' tab in the lower left corner of the screen, the system monitor opens. You can monito...
Page 84: The System Monitor
The system monitor introduction you can open the system monitor to get an overview of the current status of the printing system. When you click on the 'system' tab in the lower left corner of the screen, the system monitor pops-up. The system state (for example: 'printing:') is displayed in the uppe...
Page 85
Description icon state the system is processing the job data. 'processing:' name> the system is receiving the job data. 'receiving:' name> the system is making settings to optimize the print quality. "optimizing print quality" roll media and roll width indication for roll 1 ... 2 (if available). 'me...
Page 86
Description icon remote assistance to the system is enabled and currently accepting a connection. The e-shredding states # description icon e-shredding is disabled. No icon e-shredding is enabled or busy. A tooltip is available with extra information. Chapter 3 - define your workflow with océ expres...
Page 87: The 'Preferences' Tab
The 'preferences' tab illustration the 'preferences' tab note: before you can edit a setting or a settings group, you must log in as a key operator or a power user. For more information, see ‘user roles and authorizations’ on page 125 . With the 'preferences' tab, you can fine-tune the system to fit...
Page 88
• 'stamping': make settings to create a stamp. Chapter 3 - define your workflow with océ express webtools 88 the 'preferences' tab operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 89: The 'Configuration' Tab
The 'configuration' tab illustration the 'configuration' tab note: before you can edit a setting or a settings group, you must log in as a system adminis- trator or a power user. For more information, see ‘user roles and authorizations’ on page 125 . The 'configuration' tab will help you install the...
Page 90
• 'external locations': make settings to create, delete and view external locations. • 'smart inbox': make settings for a smart inbox for scan jobs. It is a permanent location on the user panel you can send scan jobs to. • 'remote security': make settings to create certificates and secure your netwo...
Page 91: The 'Support' Tab
The 'support' tab introduction note: log in as system administrator or power user. For more information, see ‘user roles and authorizations’ on page 125 . The 'support' tab the 'support' tab consists of three sections: • 'about': find general information about the system and generate the 'quick resp...
Page 92: Settings
Define your printing system default settings about the default settings in océ express webtools definition before you send jobs to the printer, remember the following: the values defined in océ express webtools are default values for the general system behavior. You can define a number of job settin...
Page 93
Set another language for océ express webtools introduction the language setting of the internet browser you use defines the language of océ express webtools. The following languages are supported: dutch, uk english, german, french, us english, spanish, danish, italian, swedish, norwegian, finnish, p...
Page 94
Note: it is possible that the internet options are put under a different menu, depending on the microsoft ® internet explorer version you use. Note: the options menu may be found under a different menu, depending on the mozilla ® firefox version you use. How to change the language setting in mozilla...
Page 95: How To Edit A Setting
How to edit a setting introduction in océ express webtools, you can make settings to personalise your printing system. 1. Browse to the settings group you want to edit, for example 'preferences' - 'system prop- erties' - 'regional settings'. 2. Click directly on the value of a setting if you want to...
Page 96
View and check the settings introduction in océ express webtools you can view and check your settings. You can also check which settings are no longer set to the factory default value. How to view and check the settings 1. Open the 'configuration' tab or the 'preferences' tab. 2. Click on 'view set'...
Page 97
Save the settings in a file introduction save the settings and the values that you configured in the océ express webtools in a file. Save the settings in a file to duplicate the settings very easily to another printer of the same type. Note: not all settings are stored in the settings file. The netw...
Page 98
Load the settings from a file introduction load the settings and the values for océ express webtools from a file. Load the settings from a file to duplicate them to another printer of the same type. Note: not all settings are stored in the settings file. The network settings are excluded from the fi...
Page 99
Restore the factory defaults introduction sometimes you want to go back to the initial settings. You can restore the factory default settings in océ express webtools. How to restore the factory defaults note: for this procedure, you need to log in as a key operator. 1. Open the 'configuration' tab o...
Page 100
Set the print job default settings definition in océ express webtools, you can configure the default values for the print job settings. When you optimize the print job default settings for your document, you get the best results. The print job settings are grouped under the 'preferences' - 'print jo...
Page 101
Description setting • select 'top delivery tray (tdt)' to default deliver your output in the top delivery tray. • select 'external output (back)' to default deliver your output at the back of the printer. Also select this option if you use the optional 'receiving rack (basket)' or a folder. 'sheet d...
Page 102
Description setting • select 'standard' to cut the print at a standard media size (din, ansi etc.). • select 'synchro' to cut the print at the end of the image. • select 'custom' (numeric) to cut the print at a specific length. 'cut method' enter the cut length of your print job. 'custom print lengt...
Page 103
Description setting select any of the options to define where to align the image on the media. For more information, see ‘set the 'alignment' mode ’ on page 183 . 'alignment' define how much you want the image to shift horizontally in the chosen alignment position. 'horizontal shift' define how much...
Page 104
Set the copy job default settings definition in océ express webtools, you can configure the default values for the copy job settings. When you optimize the copy job default settings for your document, you get the best results. The copy job settings are grouped under the 'preferences' - 'copy job def...
Page 105
Set the scan job default settings definition in océ express webtools, you can configure the default values for the scan job settings. When you optimize the scan job default settings for your document, you get the best re- sults. The scan job settings are grouped under the 'preferences' - 'scan job d...
Page 106
Description setting fill in the number that replace the # hashes in the name. The number increases after each scan. 'start value for ### in the scan file name' fill in the scan filename used for scans to the smart inbox. When the scan filename contains one or more #, the hashes are replaced by ascen...
Page 107
Manage jobs on your printing system the 'smart inbox' and the queue concept definition you can use the 'smart inbox' for customized job management. # the smart inbox the jobs queue concept personal mailboxes production belt metaphor • send jobs to the system • organize jobs • get the job printed as ...
Page 108
Jobs, it is only visible on your local browser. When you send a print job to the printer, the user panel will also display the smart inbox. • an operator can create smart inboxes for scan jobs. The operator can create these smart inboxes in océ express webtools under the 'configuration' tab. The sma...
Page 109
Note: only one user can save a scan job at a time. If several users save a scan job, the downloads will take place one after the other. If a dialog to select the save location is open, no download will start. Note: the icon in front of the job name provides status information about the job. Detailed...
Page 110
'delete' to delete a job from the queue, select the job and click 'delete'. Retry to retry to send a job, select the job and click retry. Send to to send a job to a new destination, select the job and click send to. Then select the des- tination. Note: the icon in front of the job name provides stat...
Page 111
Use smart inboxes in a multiple-user environment introduction a multiple-user environment is a work environment in which users send jobs to the printer directly and collect their own prints. In this environment, it is important for a user to have easy access to personal jobs. Illustration how to set...
Page 112
Value setting 'keep copies of local print jobs in the smart inbox' 'to queue and smart inbox' 'default destination of print jobs' for example: 48 hours 'expiration timeout for smart inbox jobs' for example: 48 hours 'expiration timeout for smart inbox copy and scan jobs' 'public' 'default smart inbo...
Page 113
Use smart inboxes in a repro environment introduction a repro environment is a work environment where a repro operator handles all the jobs. In this environment the repro operator can use the 'smart inbox' to organize his daily work. Illustration how to set up the repro workflow 1. Open the 'prefere...
Page 114
Value setting 'keep copies of local print jobs in the smart inbox' 'only to smart inbox' 'default destination of print jobs' for example: 48 hours 'expiration timeout for smart inbox jobs' for example: 8 hours 'expiration timeout for smart inbox copy and scan jobs' 'public' 'default smart inbox' cha...
Page 115
Use smart inboxes in a multiple-user and repro environment introduction a multiple-user and repro environment is a work environment in which users send jobs directly and collect their own prints at the printer. The system is also used by a repro operator. In this environment it is important for a us...
Page 116
Value setting 'display a view on all smart inbox jobs' 'only to smart inbox' 'override destination of print jobs' 'keep completed jobs in the smart inbox' 'keep copies of local print jobs in the smart inbox' 'to queue and smart inbox' 'default destination of print jobs' for example: 48 hours 'expira...
Page 117
Create and open a smart inbox for print jobs introduction there a two ways to create and open a smart inbox for print jobs in océ express webtools: • in the smart inbox section under the 'jobs' tab. • in océ publisher express. Note: note that the smart inboxes for print jobs created in the smart inb...
Page 118
Smart inbox for print jobs in océ publisher express a user can open or create a smart inbox in océ publisher express: 1. Select the 'jobs' tab. 2. Click on 'create new job' in the océ publisher express section. 3. In the 'workflow' section, click on the smart inbox field to open a drop-down list wit...
Page 119
Create and open a smart inbox for scan jobs introduction in addition to the smart inboxes for print jobs, you can also create smart inboxes for scan jobs. You can create a smart inbox for scan jobs under the 'configuration' tab. The smart inbox for scan jobs is present as a scan location on the user...
Page 120
4. Enter a 'description'. 5. Click ok to confirm. Result the smart inbox is now displayed in the smart inbox section and is visible on the user panel as a location. Chapter 3 - define your workflow with océ express webtools 120 create and open a smart inbox for scan jobs operating information: plotw...
Page 121
Store print, copy and scan jobs in the smart inbox introduction in océ express webtools, you can store your jobs in the smart inbox temporarily. This way you can manage your jobs better and reprint any job you like. Note: storing jobs in the smart inbox is temporary. Once the time set in océ express...
Page 122
Store scan jobs 1. Open the 'preferences' - 'system properties' tab. 2. In the 'job management' section, click on the 'keep copies of scanned jobs in the smart inbox'. 3. Check the box to enable the setting. 4. Click ok. Scan jobs are now stored in the smart inbox. Set the 'expiration timeout for sm...
Page 123
Close or delete a 'smart inbox' introduction in océ express webtools, you can also close or delete smart inboxes. • you can close the smart inbox for print jobs on your browser in the smart inbox section. • you can delete the smart inbox for scan jobs under the 'configuration' tab. Note: when you de...
Page 124: Settings
Configure your network and security settings configure the network settings in océ express webtools introduction some of the network settings are configured during the installation of your system. If you want to change the initial configuration or if you want to define more network settings, you can...
Page 125: Access And Passwords
Access and passwords user roles and authorizations introduction you can view all settings in océ express webtools, but when you want to edit a setting a message appears. This message indicates that the setting is password protected. You must log in with a password to change a setting. Attention: han...
Page 126
Log in as an authorized user purpose in order to have write access for certain settings, you must log in as an authorized user there are three user roles: system administrator, key operator and power user. They have authorization to edit specific groups of settings. You do not need to log in before ...
Page 127
Change the password for authorized users when to do for security reasons it is advisable to periodically change the password for the three access modes (key operator, system administrator, power user) in océ express webtools. Attention: handle and store all passwords securely and with care. In case ...
Page 128
Shut down or restart the system note: for this procedure, you need to log in as a system administrator. To remotely shut down the printing system, you can click on 'shut down' in the 'support' tab of océ express webtools. When the printing system is on, you can also use this button to restart the sy...
Page 129: Secure Protocols
Secure protocols define the ip type introduction in addition to ipv4, the printer also supports ipv6. You can choose to use either ipv4 or ipv6, but océ express webtools also allows you to use both simultaneously. For more information on the differences between ipv4 and ipv6, please consult the conn...
Page 130: Enable Access Control
Enable access control introduction if you want to control access to your printer, you need to enable access control in océ express webtools. With access control enabled, you are able to choose up to five hosts who are allowed to communicate with the printer through your network. This amount of hosts...
Page 131
Access control and ipsec settings introduction when access control is enabled, you can edit the access control settings. Note: be sure to set a password for changing the network settings. With this password you can reset the network settings from the user panel in case you get locked out of the syst...
Page 132
Note: for more details on these settings, please consult the security manual. Chapter 3 - define your workflow with océ express webtools 132 access control and ipsec settings operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 133: Remote Security
Remote security introduction by default, the first certificate delivered for the use of https is an océ self-signed cer- tificate. To ensure a fully trusted authentication, you can request and import a certificate delivered by a certification authority (ca-signed certificate). In océ express webtool...
Page 134
Remote security: generate a ca-signed certificate request introduction to ensure a fully trusted authentication via https, you can request and import a cer- tificate delivered by a certification authority (ca-signed certificate). In océ express webtools, you can generate a certificate request yourse...
Page 135
Result the web server generates a certificate request. The content of the request is displayed (plain text). Example (fake request): -----begin new certificate request----- miibvdccasqawfdelmakga1uebmcrlixddakbgnvbagta0lerjeq- ma4ga1uebxmhq1jfvevj tdebega1uechmkt2nlifbmvcbtqtemmaoga1uecxmdu05tmsowka...
Page 136
Remote security: import a ca-signed certificate introduction to ensure a fully trusted authentication via https, you can request and import a cer- tificate delivered by a certification authority (ca-signed certificate). In océ express webtools, you can generate a certificate request yourself or you ...
Page 137
Import the 'ca-signed certificate' follow steps 1 and 2 from the first procedure again, then: 1. Select 'ca-signed certificate'. 2. Browse to the certificate file. 3. Select "yes" to validate the certificate against java root certificates and click "import". 4. When the message 'certificate successf...
Page 138: E-Shredding
E-shredding enable or disable the e-shredding function introduction the e-shredding function allows you to securely erase jobs from the system. This prevents unauthorized people from recovering deleted jobs. When the e-shredding function is enabled, you can select an e-shredding algorithm. You can e...
Page 139
Select the e-shredding algorithm introduction the e-shredding function allows you to securely erase jobs from the system. This prevents unauthorized people from accessing deleted jobs. You can select one of the following algorithms: • 'gutmann'. All jobs on the system are erased in 35 overwrite pass...
Page 140
Specify the number of overwrite passes introduction the e-shredding function allows you to erase jobs from the system. This prevents unau- thorized people from accessing deleted jobs. You can manually enter the required number of overwrite passes. In order to do this, the setting 'e-shredding algori...
Page 141
Configure the presets and stamping what you need to know about presets definition job presets enable you to easily perform print, copy and scan jobs that you do very often. Presets on the user panel with a preset, you can predefine the settings you need for a job. If you tap the 'copy' or 'scan' til...
Page 142: Set The Copy Presets
Set the copy presets introduction with a preset, you can predefine the settings you need for a copy job. In océ express webtools, you can make different preset settings: • you can choose the default presets from a list of predefined presets. The default presets are used when you press the green butt...
Page 143
Illustration define the default preset in océ express webtools: 1. Open the 'preferences' - 'copy job defaults' tab. 2. Under 'user panel configuration: default presets for copy' select the preset category you want to change, for example 'default layout preset'. 3. Select the setting you want to use...
Page 144
2. Select the preset category you want to make a custom preset in and click on "edit", for example 'custom image preset for copy'. 3. Fill in a name and description that will be used for the preset on the user panel. 4. Select the settings you want to use for the custom preset, for example choose to...
Page 145: Set The Scan Presets
Set the scan presets introduction with a preset, you can predefine the settings you need for a scan job. In océ express webtools, you can make different preset settings: • you can choose the default presets from a list of predefined presets. The default presets are used when you press the green butt...
Page 146
Illustration define the default preset in océ express webtools: 1. Open the 'preferences' - 'scan job defaults' tab. 2. Under 'user panel configuration: default presets for scan' select the preset category you want to change, for example 'default file type preset'. 3. Select the setting you want to ...
Page 147
2. Select the preset category you want to make a custom preset in and click on "edit", for example 'custom image preset for scan'. 3. Fill in a name and description that will be used for the preset on the user panel. 4. Select the settings you want to use for the custom preset, for example choose to...
Page 148: Set The Print Presets
Set the print presets introduction with a preset, you can predefine the settings you need for a print job. In océ express webtools, you can make different preset settings: • you can choose the default presets from a list of predefined presets. The default presets are used when you press the green bu...
Page 149
Illustration define the default preset in océ express webtools: 1. Open the 'preferences' - 'print job defaults' tab. 2. Under 'user panel configuration: default presets for print' select the preset category you want to change, for example 'default layout preset'. 3. Select the setting you want to u...
Page 150
2. Select the preset category you want to make a custom preset in and click on "edit", for example 'custom image preset for print'. 3. Fill in a name and description that will be used for the preset on the user panel. 4. Select the settings you want to use for the custom preset, for example choose t...
Page 151: Create A Stamp
Create a stamp introduction in the custom preset section of the 'copy job defaults' in océ express webtools, you can enable the stamp functionality. Under the 'stamping' tab you can create your own predefined stamp. Note: for more information, on how to enable a stamp, see ‘set the copy presets’ on ...
Page 152
7. Enter the 'horizontal shift' and 'vertical shift' in mm to specify the position you have chosen at step 5. 8. Select the color of the stamp. Note: most settings are optional, so you do not have to enter all settings if it is not necessary. Result your stamp is created. You can now enable your sta...
Page 153: Configure Your Locations
Configure external locations configure your locations introduction on the user panel, you can find a list of locations you can scan to and print from. You can send scanned files to this location for storage or save files at this location and later send them to the printer. You can define the externa...
Page 154: Enable Or Disable Usb
Enable or disable usb introduction if you want to use usb as a location, you have to make settings for usb first. You can make the settings in océ express webtools. Illustration make settings for usb open the 'configuration' - 'external locations' tab. Usb is present in the list of external location...
Page 155
Result if you enable usb and insert a usb on the user panel, the external usb location can be used via the user panel and in océ express webtools. If you disable usb, usb cannot be used as an external location. Chapter 3 - define your workflow with océ express webtools 155 enable or disable usb oper...
Page 156
Create an external location introduction you can create an external location with océ express webtools. Before you begin note: make sure you enable 'smb' protocol. Note: make sure you enable 'ftp' under the 'configuration' - 'connectivity' tab. Note: make sure the url for 'webdav' and 'eneo' is not ...
Page 157
6. Enter the 'username': the user name gives access to the external location. The user must at least have read and write permissions for the external location. For smb destinations, the format must be as follows: local user name: “ipaddress\user- name” or “hostname\username”. Domain user name: “doma...
Page 158
Error messages when validation fails error messages and solutions when you create your external location, the system validates the location. The system checks the following aspects: 1. • check the remote folder syntax. • check the validity of the hostname. • check the possibility of connecting to th...
Page 159
Possible solution message on the user panel for ftp and smb: • check whether the hostname is ok. • check whether the printer is connected to customer's network. • check the network settings of the printer in océ express webtools: - primary dns suffix - preferred dns server - subnet mask - default ga...
Page 160
Possible solution message on the user panel for ftp: • check whether the ftp protocol is enabled on the re- mote host. • check whether the customer network security policy (firewall/switch) allows ftp ports. • for ftp destination: check whether the ftp server is using port 21. • for smb: • check tha...
Page 161
Possible solution message on the user panel • restart the system and try again. • for eneo and webdav: - check the url syntax entered in the path setting. - if eneo or webdav does not require internet access (local network), make sure the "proxy settings" feature is not checked. 'the test of the ext...
Page 162
Configure the printer settings configure the regional settings purpose the regional settings are configured during the installation of your printer. If you want to change the initial configuration, you can do so in the 'regional settings'. Define the regional settings for the printer in the followin...
Page 163
Configure the 'user panel timeout' introduction the printer user panel can automatically return to the home screen. If you disable this setting, the user panel display does not return to the home screen automatically. When to do enable the setting and define a suitable time-out period that does not ...
Page 164
Configure automatic wake-up introduction you can use automatic wake-up to start up the printer automatically each workday. The wake-up time and workdays are configurable. Illustration how to configure automatic wake-up 1. Open the 'preferences' - 'system defaults' tab. 2. Click on 'edit' in the 'pri...
Page 165
Configure the sleep mode timeout introduction the printer offers an energy save mode that you can use when the printer is idle for a defined period. The configuration of the timer prevents unnecessary power consumption. The printer uses minimal energy because the power supply of the printer is turne...
Page 166
Configure the 'media request timeout' introduction the operator panel displays a message with a media request when the requested media is not available on the printer. • if the 'media request timeout' setting is disabled, the media request will be displayed on the operator panel until it is resolved...
Page 167: Configure The Media Sizes
Configure the media sizes introduction you can load various media sizes on the printer. In océ express webtools, you can in- dicate the various media sizes to make them recognizable for the printer. Note: for this procedure, you need to log in as a system administrator. How to define the media sizes...
Page 168
Configure the pen settings introduction normally, you define the pen settings in the application that you use to create a drawing with. If the pen settings are not defined in the application, the default pen settings in océ express webtools are used. Note: for this procedure, you need to log in as a...
Page 169: Océ Mobile Webtools
Configure mobile printing and scanning océ mobile webtools introduction océ mobile webtools provides the following functionalities: • submit a print-ready file to the printer from a mobile device. • save a scanned file from the printer on a mobile device. • delete a scanned file on the printer. Illu...
Page 170
• a compatible mobile operating system. • a compatible mobile web browser. Optionally: • a mobile file explorer application to print a stored file. • a mobile application to scan qr code. How to use the functionality when you want to use océ mobile webtools: • the system administrator configures the...
Page 171: Nection
Configure océ express webtools settings for a mobile con- nection introduction if you want to give users easy access to océ mobile webtools, the settings must first be configured. With the information, you can develop a 'quick response card' to create easy access. Before you begin make sure you conf...
Page 172
Note: if the printer is in a windows domain network, enter the domain name in océ express webtools: - open the 'configuration' - 'connectivity' tab - go to the 'network adapter' section. Enter the domain name in the field 'primary dns suffix'. Result the information you entered in the mobile section...
Page 173
Generate the 'quick response card' introduction if you want to give users easy access to the printer from their mobile devices, you can generate the 'quick response card'. The 'quick response card' contains all the infor- mation necessary to establish a connection between the mobile device and the p...
Page 174
Illustration [126] example of a qr card generate the 'quick response card' in océ express webtools on your computer: 1. Open the 'support' - 'about' tab. 2. Click on 'quick response card' in the 'downloads' section. A new window opens: the 'quick response card' is automatically generated and display...
Page 175
Connect your mobile device to océ mobile webtools introduction when you scan the qr code or enter the printer's url in the mobile web browser, you can connect to océ mobile webtools. Before you begin • make sure the system is configured. • make sure you generate the 'quick response card'. • make sur...
Page 176
2. Enter the printer's url, displayed on the 'quick response card'. For example: http://hostname(.Com)/mobilewebtools. 3. When requested, enter the password on the 'quick response card' in order to connect. Connect to océ express webtools using the ip address if permitted by the system administrator...
Page 177: Productivity
Optimize your print quality and print productivity set the 'pdf transparency flattening' introduction in océ express webtools, you can select a setting to flatten transparency information in a pdf document before printing. The setting is used for pdf documents containing transparency information onl...
Page 178
Set the 'pdf wipeout correction' introduction the 'pdf wipeout correction' setting allows you to print pdf documents that contain solid black areas that block parts of the image. If you enable this setting, pdf documents are printed correctly but the processing of the pdf files is slower. Before you...
Page 179: Set The 'Long Plot Mode'
Set the 'long plot mode' introduction when the 'long plot mode' setting is enabled, it allows you to print plots up to eight times longer than when the setting is disabled. For the printer to be able to print long prints, the print quality can be reduced. Note: for this procedure, you need to log in...
Page 180
Set the 'automatic roll switch' introduction in océ express webtools, you can choose to enable or disable the 'automatic roll switch' for the following purposes: • 'enabled' select this value when you have two media rolls that contain identical media: the same media type and size. The printer automa...
Page 181: Set The 'Spool Threshold'
Set the 'spool threshold' introduction if the job memory is full, the printer cannot receive new jobs. It is therefore to necessary to spool the memory. Use the 'spool threshold' setting to define the spool capacity for your jobs. You can choose one of following values: • 'low' select this value if ...
Page 182: Set The 'Rotation' Mode
Set the 'rotation' mode introduction if you want to turn an image, you can use the rotation settings. The setting allows you to turn the image according to predefined rotation values or you can let the printer perform the rotation automatically. Choose one of the following values: • 'no rotation' • ...
Page 183: Set The 'Alignment' Mode
Set the 'alignment' mode introduction if you want shift the image on the sheet, you can change the alignment mode. With the alignment mode, you can also optimize the print productivity as you reduce the distance the print carriage has to travel. You can, for instance, align the image to the top righ...
Page 184
Set the link speed and duplex mode introduction use océ express webtools to set the transmission speed and duplex mode for your network adapter. Before you begin note: for this procedure, you need to log in as a key operator. Note: the list of values you can select depends on the network card type. ...
Page 185
Chapter 4 use the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 186
What you need to know before you start a job definition you can make a copy, scan or print job as intricate as you like. There are three general levels on which you can make changes to the job settings before you start a job: • default level: simple • presets level: medium • advanced settings level:...
Page 187
• make sure that you define the correct job settings: for example, orientation, rotation and media type. Chapter 4 - use the printing system 187 what you need to know before you start a job operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 188: How To Feed An Original
How to feed an original introduction when you want to copy or scan, it is important to correctly feed the original in the printer. Attention: the scanner cannot scan an original that is thicker than 0.8 mm or rigid originals. When you use the carrier sheet that is available as an option, ensure that...
Page 189
2. The scanner takes the original. The width of the original is automatically detected and displayed in the smart access. The live scan view displays the scanning process. Result depending on the selected 'original release mode' in océ express webtools, the scanner holds or releases the original aft...
Page 190
How to auto-feed an original introduction when you activate the auto-feed functionality, you do not need to use the green button every time you scan a document. This way, you improve your productivity. The scanner is activated automatically and releases the original after the scan procedure. Note: t...
Page 191
How to use the carrier sheet introduction the carrier sheet can help you scan an original. The use of the carrier sheet depends on the condition of your original. When to do you can use the carrier sheet when you want to copy or scan: • an original that is smaller than a4 size • an original that is ...
Page 192
Note: the scanner will detect the width of the carrier sheet as the original width. 4. The scanner takes the carrier sheet with the original. 5. A copy or scan is made of your original. Chapter 4 - use the printing system 192 how to use the carrier sheet operating information: plotwave (pw) 340, pw3...
Page 193
Print jobs - job submission tools use océ publisher express to send a print job introduction océ publisher express is a job submitter that is integrated in océ express webtools. Note: when you use océ publisher express to submit a print job, the maximum job size is 2 gigabyte. Chapter 4 - use the pr...
Page 194
Illustration how to use océ publisher express to send a print job # remarks action step this tab displays the following. • the océ publisher express section. • an overview of all jobs that are current- ly available in the job and scan queues. • an overview of all the smart inboxes that currently con...
Page 195
Remarks action step you can print documents with the follow- ing data formats • - hp-gl - .Hp, .Hpg, .Hpgl • - hp-gl/2 - .Hp2 • - hp rtl - .Rtl • - cals - .Cls, .Cal • - nirs - .Nir, .Nif • - calcomp - .Cc, .906, .907, .951, .Crf, .Pci • - edmics (c4) - .C4 • - tiff - .Tif • - postscript 3 - .Ps (li...
Page 196
Use the smart inbox to send a print job introduction if you have already added a job to the smart inbox in océ express webtools, you can print this job via the smart inbox. Note: for more information on how to create a smart inbox, see ‘create and open a smart inbox for print jobs’ on page 117 and ‘...
Page 197
Use océ publisher select to send a print job definition océ publisher select is a client application that allows you to create, preview, print and manage jobs in an intuitive way. Océ publisher select the software is based on user's intent. When a job is created, the system: • allows you to load fil...
Page 198
Remarks action step the system immediately starts to interpret the file. It automatically selects the most appropriate media and orients the image on the media. Add the print files to the job 3 in the 'edit document print settings' window, you can: • select one or several documents in the 'document ...
Page 199: Win-
Use the océ wide format printer driver for microsoft ® win- dows ® to send a print job introduction océ provides the océ wide format printer driver for microsoft ® windows ® that allows you to send print jobs to your printer. This driver is a mixed raster-vector hp-gl/2 printer driver that allows yo...
Page 200
Remarks action step you can define the default print job settings in océ express webtools. Click 'properties'. 4 in the 'image' tab click the 'more' button. Make sure a checkmark is placed in the 'océ ticket enabled' box to overrule the default values for the job settings. 5 check all tabs in the dr...
Page 201: Use The Océ Postscript
Use the océ postscript ® 3 driver to send a print job introduction océ provides the océ postscript ® 3 driver that allows you to send print jobs to your printer. Note: you need a license to be able to print postscript files on the printer. Illustration how to use the driver to send a print job # rem...
Page 202
Remarks action step activate the océ job ticket to overrule the default values for the job settings. 5 check and change the printer features settings if necessary. 6 click 'ok' to send the print job to the smart inbox or the print queue. 7 note: for more information visit http://global.Oce.Com/suppo...
Page 203
Use océ publisher mobile to send a print job introduction océ publisher mobile is an application that enables you to easily plot from an océ system via your iphone or ipad. All océ tcs, tds, colorwave and plotwave systems are supported. A user can plot all pdf*, plt (hpgl1/2), tiff, jpeg and dwf* fi...
Page 204
Remarks action step if your printer is not detected, you can add it manually. Tap the "add" printer button. The detected printer, indicated with a "connection" icon, is added to your printer list. 3 from the printer list, select your printer. 4 the printer configuration win- dow opens. Tap the "conf...
Page 205
Remarks action step main settings you can select: • media source • scale • folding define the print settings you need. 3 indicate the number of copies. 4 your job is sent to the printer. Tap the green button 5 chapter 4 - use the printing system 205 use océ publisher mobile to send a print job opera...
Page 206
Print from your mobile device introduction if you have access to océ mobile webtools, you can print a file from your mobile device on the printer. Note: you can navigate in a file repository on your mobile device. If needed, install a file ex- plorer application. For more details, refer to the océ w...
Page 207
1. Go to the 'print' section and select 'new job'. The 'print job' window opens. 2. Click on 'select a file'. 3. Browse to the file you want to print and click open. 4. Define the settings for your print job and click ok. 5. After defining your settings, click on the printer icon in the upper right-...
Page 208
Use ftp to send a print job introduction the printer supports printing through ftp. If you send your print job through ftp, the default océ express webtools settings are leading. Note: you must enable printing through ftp in océ express webtools. Note: for more information on how to create an extern...
Page 209
Web browsers that support job submission through ftp # operation web browser level of functionality drag the jobs into the 'jobs' folder on the ftp site of your printer. Microsoft ® internet ex- plorer 6.0 (or higher) mozilla firefox™ 1.5 (or higher) supports drag and drop of files paste the jobs in...
Page 210
Use lpr to send a print job introduction the printer supports printing through lpr. When you send your print job through lpr, the default océ express webtools settings are leading. Note: you must enable printing through lpr in océ express webtools. How to send a print job via lpr type the following ...
Page 211
Use the cloud to send a print job introduction the cloud can be seen as a virtual network drive you use to send files to, but also to save and share files on. There are general cloud applications, such as sharepoint or applications via a http url, but companies can also use their own private and int...
Page 212: Do A Default Print Job
Basic print jobs - default do a default print job introduction when you want to print a job and you do not make any settings, the default presets are used. You only use the smart access to start your job. You can see the presets that are used in the job settings section of your job. Before you begin...
Page 213
2. Select the location of your job. Default, the public smart inbox. The jobs are listed in a new window. 3. Select your job from the list. 4. Tap the green button next to the job settings. Result a print of your file is made. Collect your document from the 'top delivery tray'. Chapter 4 - use the p...
Page 214: Direct Print
Direct print introduction when you want to do a default print job: • you can print with direct print. When you print with direct print, the print job is sent to the queue immediately. • you can print without direct print. When you print without direct print, you have to start the job locally at the ...
Page 215
2. Go to the printer and open your smart inbox via the smart access on the user panel. 3. Select your job in the smart inbox. 4. Tap the green button to print your job. Result collect your output at the printer. Chapter 4 - use the printing system 215 direct print operating information: plotwave (pw...
Page 216
Print from a usb mass storage device introduction with the help of a usb mass storage device, you can perform print and scan jobs on the printer. When you want to print from a usb device: 1. Insert a usb device into the usb port on the multi-touch user panel. 2. The 'print' tile is automatically sel...
Page 217
Extended print jobs - presets print presets on the user panel introduction when you do not make different settings in océ express webtools, the printer uses the default presets for print, copy and scan jobs. Below the presets, you can use to change the settings for print jobs on the multi-touch user...
Page 218
Extended print jobs - advanced settings advanced settings for print jobs introduction when you tap the 'print' tile on the multi-touch user panel, you can make your own settings. In addition to the preset tiles, you can select the advanced settings under 'all settings'. These settings are used for e...
Page 219
Preset category: 'layout' # function settings values setting when set to 'synchro', the print is cut depended of the image. When set to 'standard', the print is cut to a standard media size. When set to 'custom', you must enter the sizes manually. 'cut method': • 'synchro' • 'standard' • 'custom' 'c...
Page 220
Function settings values setting 'aligns the image on the media.' 'alignment': • 'top left' • 'top' • 'top right' • 'left' • 'center' • 'right' • 'bottom left' • 'bottom' • 'bottom right' 'positioning' 'shifts the image in the horizontal direc- tion (after alignment to one of the posi- tions given i...
Page 221
Function settings values setting scales the image to the original size. '1:1' 'scale' scales the image to half the media size present. 'standard half size' scales the image to fit the media size you select from a list. 'fit to media width' scales the image to a custom percentage. 10 - 1000'%' 'custo...
Page 222
Preset category: 'finishing' # function settings values setting location on top of the printer that de- posits the sheet face-down. Note: not all media types can be deliv- ered to the 'top delivery tray'. 'top delivery tray' 'delivery' location at the back of the printer that deposits the sheet face...
Page 223
Basic copy jobs - default advised settings for copy jobs introduction a default copy job takes two steps: feed the original face up and tap the green button. When you change the presets or the advanced settings, it is an extended copy job. Recommended settings for copy jobs it is best to predefine t...
Page 224
Remarks original type original document the image is inverted, that is white is converted to black. 'blueprint' blueprints with white lines on a blue background note: for highlighting color on an otherwise monochrome original, select the listed original type and enable 'color highlighting'. Enable '...
Page 225: Do A Default Copy Job
Do a default copy job introduction when you want to copy an original and you do not make any settings, the default presets are used. You only use the smart access to submit your job. You can see the presets that are used in the job settings section of your job. Illustration do a default copy job 1. ...
Page 226
The 'copy' tile with the copy smart access is automatically selected on the user panel. 2. Select the number of copies and tap the green button. Note: tap on 'release the original' under the smart access to release your original from the scanner. Result a copy of your original is made. Collect your ...
Page 227
Extended copy jobs - presets copy presets on the user panel introduction if you do not make different settings in océ express webtools, the printer uses the default presets for print, copy and scan jobs. The presets you can use to change the settings for copy jobs on the multi-touch user panel are l...
Page 228: Make A Half Size Copy
Make a half size copy introduction when you want to scale your original to a 50% copy, you can select a preset on the user panel. Make a half size copy 1. Feed the original face up and centered on the original feeding table. Note: you do not need to center the original precisely. The exact position ...
Page 229: Copy By Set
Copy by set introduction you can use the 'create set' option to make multiple sets of copies. How to copy by set 1. Feed the original face up and centered on the original feeding table. Note: you do not need to center the original precisely. The exact position of the original is au- tomatically dete...
Page 230
Extended copy jobs - advanced settings advanced settings for copy jobs introduction when you tap the 'copy' tile on the multi-touch user panel, you can make your own settings. In addition to the preset tiles, you can select the advanced settings under 'all settings'. These settings are used for exte...
Page 231
Preset category:'layout' # function settings values preset when set to 'synchro', the print is cut depended of the image. When set to 'standard', the print is cut to a standard media size. When set to 'custom', you must enter the sizes manually. 'cut method': • 'synchro' • 'standard' • 'custom' 'cut...
Page 232
Function settings values preset 'erase a strip from the beginning of the original.' from 0 to 400 mm or 0 to 16". 'top' 'remove strip' 'erase a strip from the bottom of the original.' from 0 to 400 mm or 0 to 16". 'bottom' 'erase a strip from the left side of the original.' from 0 to 400 mm or 0 to ...
Page 233
Function settings values preset 'aligns the image on the media.' 'alignment': • 'top left' • 'top' • 'top right' • 'left' • 'center' • 'right' • 'bottom left' • 'bottom' • 'bottom right' 'positioning' 'shifts the image in the horizontal direc- tion (after alignment to one of the posi- tions given in...
Page 234
Function settings values preset scales the image to the original size. '1:1' 'scale' scales to the selected media width. 'to media size' scales the image to fit the media size you select from a list. 'to standard size' scales the image to a custom percentage. 10 - 1000'%' 'custom' chapter 4 - use th...
Page 235
Preset category: 'image' # function settings values settings val- ues preset define the type of original you use. For more information on choosing the correct original type, see ‘advised settings for copy jobs’ on page 223 . 'lines/text stan- dard' 'lines/text draft' 'colored original' 'folded lines...
Page 236
Function settings values settings val- ues preset the width of the original is a standard size. Note: depends on the media series defined in océ express webtools the width of the original is a custom size. 'custom' you can enter a size within the range of 210 to 914 mm or 8.5 to 36". Chapter 4 - use...
Page 237
Function settings values settings val- ues preset when enabled, all colored infor- mation is printed darker on the original than black/gray informa- tion. For instance, marked or highlighted text becomes more visible. Note: it is only relevant for the copy modes: 'colored original', 'lines/text stan...
Page 238
Function settings values settings val- ues preset 'the horizontal offset where the erase area starts.' from 0 to 914 mm or 0 to 36". 'area to erase: x origin' 'area to erase' 'the vertical offset where the erase area starts.' from 0 to 6000 mm or 0 to 250". 'area to erase: y origin' 'the width of th...
Page 239
Preset category: 'finishing' # function settings values preset location on top of the printer that de- posits the sheet face-down. Note: not all media types can be deliv- ered to the 'top delivery tray'. 'top delivery tray' 'delivery' location at the back of the printer that deposits the sheet face-...
Page 240
Make a copy and add a strip introduction when you make a copy, you can add a strip to a document. Use 'cut size' to copy an original without a strip and add a strip to the copy. You can add a strip at the top or bottom of a copy. Note: for more information on the cut size settings, see ‘preset categ...
Page 241
# 'add a trailing strip' 'add a leading strip' 5. Tap 'add a leading strip' or 'add a trailing strip' and define the values. 6. Make your settings and tap 'ok'. 7. Define the number of copies and tap the green button. Result the document is printed with a strip attached to the top or bottom. Chapter...
Page 242
Make a copy and remove a strip introduction when you have an original with a strip, you can remove the strip from your copy. Use the option on the user panel to copy an original with a strip and remove the strip from the copy. You can remove a strip from the top, the bottom, the left or the right si...
Page 243
Result the printer copies the original without the defined strip. You can also use this setting to copy a specific area of the original. For more information, see ‘make a copy of a specific area of an original’ on page 244 . Chapter 4 - use the printing system 243 make a copy and remove a strip oper...
Page 244
Make a copy of a specific area of an original introduction you can make a copy of a specific area of an original. Use the option 'remove strip' to copy a specific area. Before you begin when you remove a strip, make sure that you copy all the required information. Note: for more information on the c...
Page 245
Result the printer copies a specific area of the original. Chapter 4 - use the printing system 245 make a copy of a specific area of an original operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 246
Make a copy and remove a specific area of an original introduction you can make a copy and delete a specific area of an original. You can use two settings: 'area to erase: width' and 'area to erase: length' to define the dimensions of the delete area. And you can use two settings: 'area to erase: x ...
Page 247
Make a copy and scale to another size introduction when you want to scale your copy to another size, you can make changes under the ad- vanced settings. With the custom setting, you can choose any scale percentage you want between the range of 10 - 1000%. Note: for more information on the other scal...
Page 248
Result a copy of the original, scaled with your percentage, is made. Chapter 4 - use the printing system 248 make a copy and scale to another size operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 249
Make a copy on a cut sheet introduction you can copy on cut sheet media if the required media type or size is not available on the media rolls of the printer. How to copy on a cut sheet 1. Feed the original face up and centered on the original feeding table. Note: the page orientation must be portra...
Page 250
9. Place the cut sheet media on the media bypass of the printer. Note: use the media size indication on the media bypass to align the cut sheet media correctly. If you use a b1 media size (707 mm), you must align the cut sheet media with the a1 indent. Result the printer copies on a cut sheet. Chapt...
Page 251
Make a copy with a stamp introduction a stamp is a mark you can put on every copy. Before you begin to enable the stamp functionality, you must first create a stamp in océ express webtools. For more information on how to do this, see ‘create a stamp’ on page 151 . How to make a copy with a stamp 1. ...
Page 252
Basic scan jobs - default advised settings for scan jobs introduction a default scan job takes three steps: feed the original face up, select the location in the scan smart access and tap the green button. When you change the presets or the advanced settings, it is called an extended scan job. Advis...
Page 253
Remarks original type original document the renewed 'dark origi- nal' setting is best for all cad originals with vary- ing background. 'dark original' dark originals and dark transparent originals 'dark original' diazo copies / "chinese blueprints" the image is inverted, that is white is converted t...
Page 254: Do A Default Scan Job
Do a default scan job introduction when you want to scan an original and you do not make any settings, the default presets are used. You only use the smart access to submit your job. You can see the presets that are used in the job settings section of your job. Illustration do a default scan job 1. ...
Page 255
2. Select the 'scan' tile on the user panel. The scan smart access is visible. 3. Select the preferred location in the smart access and tap the green button. Note: when you do not select a location, the file is sent to the public smart inbox. Note: tap on 'release the original' under the smart acces...
Page 256: Presets
Extended scan jobs - locations and presets scan presets on the user panel introduction if you do not make different settings in océ express webtools, the printer uses the default presets for print, copy and scan jobs. The presets you can use to change the settings for scan jobs on the multi-touch us...
Page 257
Scan a photo to 'jpeg' format introduction when you want to scan a photo to 'jpeg' format, you can select the presets on the user panel. 1. Feed the original face up and centered on the original feeding table. Note: you do not need to center the original precisely. The exact position of the original...
Page 258
Scan cad color to 'tiff' format introduction when you want to scan a cad colour to 'tiff' format, you can select the presets on the user panel. 1. Feed the original face up and centered on the original feeding table. Note: you do not need to center the original precisely. The exact position of the o...
Page 259
Result a scan to 'tiff' file is made and sent to your preferred location. As default, you can find your file in the public smart inbox in océ express webtools. Chapter 4 - use the printing system 259 scan cad color to 'tiff' format operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 260
Scan to a usb mass storage device introduction when you insert a usb device in the user panel, you can scan to usb. Before you begin before you scan to usb, make sure the right functionalities are enabled. For more infor- mation, see ‘enable or disable usb’ on page 154 . How to scan to a usb device ...
Page 261
Scan to an external location introduction when you want to scan an original and you do not make any settings, the default presets are used. You only use the smart access to submit your job. In the smart access, you can select the location you want to send your scan to. With the océ plotwave 340/360 ...
Page 262
2. Select the 'scan' tile on the user panel. The scan smart access is visible. 3. Select the preferred location in the smart access. Tap the 'scan' tile once more if you want to change the settings. 4. Tap the green button. Note: tap on 'release the original' under the smart access to release your o...
Page 263
Scan to a smart inbox and collect your file introduction when you scan a document on the printer, the public smart inbox is the default location you scan to. You can also choose another smart inbox as your location in the smart access of the user panel. Before you begin you can create your own smart...
Page 264
2. Select the 'scan' tile on the user panel. The scan smart access is visible. 3. Select the preferred smart inbox in the smart access. Tap the 'scan' tile once more if you want to change the settings. 4. Tap the green button. Note: tap on 'release the original' under the smart access to release you...
Page 265
4. In the smart inbox, select your job. 5. In the bar above, select 'send to...' to send your job to the destination you want to save it in. Or select 'save' to save your job locally. Result your scanned file is saved at the preferred destination. Chapter 4 - use the printing system 265 scan to a sm...
Page 266
Save a scanned document on your mobile device introduction if you have access to océ mobile webtools, you can scan a document from the printer and save it on your mobile device. Before you begin make sure you have a working connection. For more information, see ‘connect your mobile device to océ mob...
Page 267
Extended scan jobs - advanced settings available settings for scan jobs introduction when you tap the 'scan' tile on the multi-touch user panel, you can make your own settings. In addition to the preset tiles, you can select the advanced settings under 'all settings'. These settings are used for ext...
Page 268
Preset: 'file type' # function settings values settings val- ues setting 'the file type of the scanned im- age. The list of file types depends on scan to color, grayscale, or black-and-white: cals is only available when scanning to black-and-white; jpeg is not available when scanning to black-and-wh...
Page 269
Preset: 'file size' # function settings values setting 'the resolution of the scanned image in dpi.' '100' '200' '300' '400' '600' 'resolution' chapter 4 - use the printing system 269 available settings for scan jobs operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 270
Function settings values setting 'erase a strip from the beginning of the original.' from 0 to 400 mm or 0 to 16". 'top' 'remove strip' 'erase a strip from the bottom of the original.' from 0 to 400 mm or 0 to 16". 'bottom' 'erase a strip from the left side of the original.' from 0 to 400 mm or 0 to...
Page 271
Preset: 'image' # function settings values settings val- ues setting define the type of original you use. For more information on choosing the correct original type, see ‘advised settings for scan jobs’ on page 252 . 'lines/text stan- dard' 'folded lines/text' 'colored original' 'artwork' 'map' 'blu...
Page 272
Function settings values settings val- ues setting the width of the original is a standard size. Note: depends on the media series defined in océ express webtools the width of the original is a custom size. 'custom' you can enter a size within the range of 210 to 914 mm or 8.5 to 36". 'defines wheth...
Page 273
Function settings values settings val- ues setting when enabled, all colored infor- mation is printed darker on the original than black/gray informa- tion. For instance, marked or highlighted text becomes more visible. Note: it is only relevant for the modes: 'colored origi- nal', 'lines/text stan- ...
Page 274: 'File Type'
'file type' depending on the color mode and file type you select, the values for the compression mode and organization change. For some file types and some situations, the compression and organization settings cannot be set. The list below helps you to define the correct file type and color mode, an...
Page 275
Color mode: grayscale # 'jpeg quality' 'compression' 'organization' 'file type' 'color' mode not applicable 'lzw' 'packbits' 'none' 'raw' 'striped' 'tiled' 'tiff' 'tiff multi- page' 'grayscale' not applicable 'flate' 'lzw' 'none' not applicable 'pdf' 'pdf multi- page' 'maximum' 'high' 'medium' 'low'...
Page 276
Color mode: black and white # 'jpeg quality' 'compression' 'organization' 'file type' 'color' mode not applicable 'group 4' 'group 3' 'packbits' 'none' 'raw' 'striped' 'tiled' 'tiff' 'tiff multi- page' 'black&white' not applicable 'group 4' 'flate' 'lzw' 'none' not applicable 'pdf' 'pdf multi- page'...
Page 277
Make a scan and remove a strip introduction if you have an original with a strip, you can remove the strip from your scanned file. Use the option 'remove strip' on the user panel to scan an original with a strip and remove the strip from the file. You can remove a strip from the top, the bottom, the...
Page 278
6. Select'top', 'bottom', 'left' or 'right' and define the values. 7. Make your settings and tap 'ok'. 8. Tap the green button. Result the printer scans the original to file without the defined strip. The file is sent to your preferred location. As default, you can find your file in the public smart...
Page 279
Pause, stop or clear the system pause, resume or stop an active job introduction if you want to pause, resume or stop an active job there are several things you can do. How to 'pause' or 'resume' an active print job # steps action tap on the active job in the dynamic bar of the user panel. The queue...
Page 280
How to stop an active print job in océ express webtools # result action step open the 'jobs' tab. 1 the system aborts and deletes the job. In the 'jobs - queue' section tick the box in front of the job you want to delete and click 'delete'. 2 chapter 4 - use the printing system 280 pause, resume or ...
Page 281: Clear The System
Clear the system when to do on the printer user panel, you can remove all print and copy jobs from the system. How to clear the system on the multi-touch user panel: 1. Tap the 'system' thumbnail in the dynamic bar. A new window opens. 2. In the 'setup' list in the bottom right corner of the screen,...
Page 282
Chapter 4 - use the printing system 282 clear the system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 283
Chapter 5 maintain the printing sys- tem operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 284: Update Your System
Update your system update the system software introduction océ express webtools offers an option to update the system software. You can find these settings under the 'support' - 'update' tab. The update option has the following functionalities: • load and remotely apply security and system software ...
Page 285
You must wait approximately 15 minutes for the files to upload. The progress bar, at the bottom of the page, indicates the progress. 3. When the upload is finished, click 'ok'. A dialog window appears. 4. Click on 'ok' to start the installation. When you do this, a warning message is displayed. The ...
Page 286: Move The Printing System
Move the printing system turn off the printing system introduction when you want to turn off the printing system completely, you have to take a few steps. 1. Use the on / off button at the front of the printer to turn the printing system off. The lighted button starts to blink. Note: you can also us...
Page 287
2. Turn off the power switch at the back of the printing system (a). A b c chapter 5 - maintain the printing system 287 turn off the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 288
Disconnect the network cable and the mains supply cable attention: make sure the main power switch (a) is in 'off' position. 1. Disconnect the network cable from the network connection at the back of the printer (c). 2. Disconnect the 'power' cable form the wall socket. 3. Disconnect the other side ...
Page 289
Move and re-adjust the printing system introduction if you move the printing system to a new location, you must check if it needs readjustment to ensure the best output quality. You need two tools for the adjustment procedure. You can find these tools behind the lower right front cover. Required too...
Page 290
2. Pull firmly to open the media drawer. 3. Slide the lower left front cover (1) to remove it. 4. Check if the level indicator arrow is exactly on the middle of the marker. If no, continue with step 5. Chapter 5 - maintain the printing system 290 move and re-adjust the printing system operating info...
Page 291
If yes, continue with step 9. 5. Slide the lower right front cover (11) to remove it and get access to the tools you need for the adjustment procedure. Chapter 5 - maintain the printing system 291 move and re-adjust the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-0...
Page 292
6. Loosen the nut with the key wrench. 7. Use the allen wrench to adjust the level until the level indicator arrow is exactly on the middle of the marker. Chapter 5 - maintain the printing system 292 move and re-adjust the printing system operating information: plotwave (pw) 340, pw350 - edition 201...
Page 293
8. Lock the nut with the key wrench. 9. Place the lower left front cover back. Chapter 5 - maintain the printing system 293 move and re-adjust the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 294
10. Place the tools and the lower right front cover back. 11. Close the media drawer. Chapter 5 - maintain the printing system 294 move and re-adjust the printing system operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 295
Connect the mains supply cable and the network cable attention: make sure the power switch(b) is in the off position. 1. Plug the power supply cable into the power connection at the back of the printer (a) (on the left-hand side). A b c 2. Plug the other side of the mains supply cable into the wall ...
Page 296
Switch on the printing system attention: make sure the power supply cable (a) is plugged in. Attention: make sure the network cable (c) is plugged in. 1. Switch on the power switch at the back of the printing system (b). A b c [240] the power switch at the back of the printer. Chapter 5 - maintain t...
Page 297: Replace The Media
Replace the media the media drawer illustration 1 2 3 5 4 component - function table # description / function component no. Carries the media roll roll holder 1 media placed on roll holder in first position. Media roll 1 2 media placed on roll holder in second position. Note: the scanner calibration...
Page 298
Description / function component no. Button used to trim a strip of a new or damaged media roll. Clean cut button 5 chapter 5 - maintain the printing system 298 the media drawer operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 299: Remove A Media Roll
Remove a media roll attention: handle the media roll with care. A dented media roll can damage the printer. Attention: do not open the media drawer during the printing process. Caution: watch your fingers when you handle the media roll. Caution: if you want to remove an a0 media roll from position 2...
Page 300
Illustration how to remove a media roll 1. Pull firmly on the media drawer to open it. Chapter 5 - maintain the printing system 300 remove a media roll operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 301
2. Roll the media back manually to remove the media from the metal paper guide. 1 3. Use both hands (as indicated) to lift the roll holder with the media roll and put it on the roll loading station. 4. Pull the handle of the roll holder locking mechanism towards you and remove the roll holder from t...
Page 302
Put the empty roll holder back into the drawer (as shown in the illustrations) 1 2 5. Remove the media roll from the roll loading station. Store it in a safe place so that it cannot fall over or roll away. Chapter 5 - maintain the printing system 302 remove a media roll operating information: plotwa...
Page 303: Unpack The Media Roll
Unpack the media roll attention: handle the media roll with care. A dented media roll can damage the printer. Attention: please refer to the list of ‘preferred océ media types and sizes’ on page 316 to find the corre- sponding media name that you must select. Attention: always write the correct medi...
Page 304
2. Remove the plug from the media roll. 3. Carefully remove the media roll from the box. 4. Remove the other plug and plastic around the media roll. Chapter 5 - maintain the printing system 304 unpack the media roll operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 305
Load a media roll (position 1) note: if your printing system is equipped with an additional media roll, it is advised to load an a0 or e-size media roll on position 1 and an a2 or c-size media roll on position 2. Caution: watch your fingers when you handle the media roll. How to load a media roll on...
Page 306
Slide (2) the roll holder into the right side of the core of the new media roll. 1 2 4. Align the roll with the center of the correct size indicator on the roll holder and release the handle of the locking mechanism. Note: if you use a b1 media size (707 mm), you must align the media roll with the a...
Page 307
5. Remove the tapes from the new media roll. Use both hands (as indicated) to place the media roll in the media drawer. 6. Use both hands to turn the media roll backwards (1) until the media flap has passed the metal paper guide. 1 chapter 5 - maintain the printing system 307 load a media roll (posi...
Page 308
7. Use both hands to slide the media under the metal paper guide (2) until the media is transported automatically. 2 8. If necessary, press the clean cut button to trim a strip of the new media roll. Press once for a strip of approximately 20 cm (7.9 in) or hold the button and release it when the st...
Page 309
Note: do not open the media drawer during loading. 10. The user panel displays the message that new media is detected. Follow the steps in the wizard to define the correct media type and size if not detected automatically. Chapter 5 - maintain the printing system 309 load a media roll (position 1) o...
Page 310
Load a media roll (position 2) note: when your printing system is equipped with an additional second media roll, it is advised to load an a0 or e-size media roll on position 1 and an a2 or c-size media roll on posi- tion 2. Caution: watch your fingers when you handle the media roll. Caution: if you ...
Page 311
Slide (2) the roll holder into the right side of the core of the new media roll. 1 2 4. Align the roll with the center of the correct size indicator on the roll holder and release the handle of the locking mechanism. Note: if you use a b1 media size, (707 mm) you must align the media roll with the a...
Page 312
5. Remove the tapes from the new media roll. Use both hands (as indicated) to place the media roll in the media drawer. 6. Use both hands to turn the media roll backwards (1) until the media flap has passed the metal paper guide. 1 chapter 5 - maintain the printing system 312 load a media roll (posi...
Page 313
7. Use both hands to slide the media under the metal paper guide (2) until the media is transported automatically. 2 8. If necessary, press the clean cut button to trim a strip of the new media roll. Press once for a strip of approximately 20 cm (7.9 in) or hold the button and release it when the st...
Page 314
Note: do not open the media drawer during loading. 10. The user panel displays the message that new media is detected. Follow the steps in the wizard to define the correct media type and size if not detected automatically. Chapter 5 - maintain the printing system 314 load a media roll (position 2) o...
Page 315
Change the media type and media size introduction when you load a new type of media, the system automatically detects the new media and can ask you to enter the correct media type and size. If the media type or size defined on the system are not correct, you can change these settings. Illustration d...
Page 316
Preferred océ media types and sizes introduction océ machines and media are matched for the best quality and performance. Océ recom- mends the use of approved océ media. You can receive a list of media (that includes plain or recycled paper, transparent paper, colored papers, and different polyester...
Page 317
Weight name us weight name europe 18lb translucent 68 gr translucent 20lb vellum 75 gr vellum note: visit the company website for the latest information. Media sizes # minimum maximum 279 millimeters 11 inch 914 millimeters 36 inch roll width not applicable 200 meters 650 feet roll length chapter 5 ...
Page 318: Refill The Toner
Refill the toner refill the toner introduction if the "refill toner" message appears on the user panel, you must refill the toner immedi- ately. Note: make sure you use toner suitable for the plotwave 340/360. Note: you must use only one bottle of toner at a time. If you use more than one bottle, th...
Page 319
How to refill the toner 1. Open the toner compartment. 2. Shake the toner bottle well. Leave the bottle closed. 3. Place the bottle on the refill opening of the toner unit. Chapter 5 - maintain the printing system 319 refill the toner operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 320
4. Pull the slider towards you to open both the bottle and the refill opening of the toner unit. 5. Tap the toner bottle gently (sideways) to let the toner flow from the bottle. 6. When the toner bottle is empty, return the slider of the toner unit to the original position to close the refill openin...
Page 321
Replace the residual toner container introduction when you refill the toner, you also need to replace the residual toner container. Attention: do not replace the container during the printing process. You can replace the container when the printer is on. How to replace the residual toner container 1...
Page 322
2. Remove the full residual toner container. Note: the residual toner container can be disposed normally. 3. Place the empty residual toner container. 4. Close the residual toner compartment. Chapter 5 - maintain the printing system 322 replace the residual toner container operating information: plo...
Page 323: Maintain The Scanner
Maintain the scanner clean the scanner introduction 10 1 2 3 4 6 7 8 9 5 # description / function component exits originals for reception into the front original tray. Originals exit 1 use this ruler to measure the original. Original size ruler 2 a set of rollers used to transport the origi- nal. Or...
Page 324
Description / function component use this table to feed the original into the scanner. Original feeding table 10 when to do the copy and scan quality can decrease if: • the transparent contact plates are dirty or static, • the original support rollers are dirty and you use transparent originals. Thu...
Page 325
A locking mechanism prevents the scanner top cover from closing. Attention: to clean the scanner, use the soft lint-free muslin towels from the scanner cleaning kit. 2. Use a muslin towel that has been moistened with water and firmly wrung out to clean the following parts of the scanner: chapter 5 -...
Page 326
• the original support rollers (6) rotate the rollers to clean them. • the transparent contact plates (9) wipe off any soiled areas. 3. Wipe all the cleaned parts once again using a dry muslin towel. Caution: take care not to get your fingers caught in the scanner top cover. 4. Press the scanner top...
Page 327: Calibrate The Scanner
Calibrate the scanner introduction you can calibrate the scanner when you are not satisfied with the copy or scan quality. Use the calibration wizard to calibrate the scanner. Before you begin clean the scanner before you start the calibration procedure. Dirty parts of the scanner cause copy and sca...
Page 328
3. Tap the 'scanner calibration' tile. A wizard opens up. 4. Follow the instructions in the wizard. 5. Insert the scanner calibration sheet when instructed in the wizard. 6. Tap the green button to start the scanner calibration. Note: 'calibrating the scanner takes between 5 to 10 minutes.' chapter ...
Page 329
Chapter 6 license management operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 330
Introduction to license management introduction for certain applications your printer uses, you need to activate a license. A product license for either the océ plotwave 340 or océ plotwave 360 is always required. You can activate licenses in océ express webtools. The following workflow describes ho...
Page 331: Check Your Licenses
Check your licenses about the licenses the license section in océ express webtools allows you to manage the licenses that are active on your system. A license is needed to activate certain functions on your printer. A product license for either an océ plotwave 340 or océ plotwave 360 is required. Li...
Page 332
Description information this field displays the license number. 'license number' chapter 6 - license management 332 check your licenses operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 333
Save the currently active licenses introduction you can save all active licenses into one single file. When to do save the currently active licenses before starting a license activation job or if you want to save the current license situation. How to save the license information note: for this proce...
Page 334: Install A New License
Install a new license introduction the océ applications and optional functions are protected against unauthorized use. An océ plotwave 340 or océ plotwave 360 product license is required to activate the printer and you need to activate a license to enable various applications. Under the 'li- censes'...
Page 335
4. When the user agreement appears, scroll down to the bottom and check the box in front of "i agree". Note: if you do not check the box for agreement, your license will not be installed. 5. Click "next". 6. Click "ok" to start the activation of the license file. A message appears when the process i...
Page 336
Chapter 6 - license management 336 install a new license operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 337
Chapter 7 account management operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 338
An overview of océ account center introduction use océ account center to manage the account information of print jobs, copy jobs and scan jobs for your océ devices. Note: for this application a separate user manual is available. Visit http://global.Oce.Com/sup- port, select your printer and find you...
Page 339
Illustration user roles and tasks in océ account center # tasks users • create, manage and delete the account dialog. • publish the account dialog to océ express webtools and the user panel. 1) administrator • use the dialog of océ express webtools to enter the ac- count information for print jobs, ...
Page 340: Océ Account Console
Océ account console ® introduction to océ account console definition océ account console is installed on the administrator's workstation. Access to océ ac- count console is password protected and limited to the administrator. Purpose océ account console has the following functionalities: • manage, p...
Page 341
Summary of océ account console main parts of océ account console an administrator uses océ account console to perform a number of maintenance and configuration tasks. The main functional areas of océ account console are described in the table below. Main parts of océ account console # description pa...
Page 342
Description part 'devices' section. • 'create...'. Use this option to create a new device. • 'delete'. Use this option to remove the device. The log data for the device is removed as well. Please note that this action cannot be reversed. • 'edit...'. Use this option to change the values for a device...
Page 343
Description part the administrator screen enables you to perform the following actions. • change the password. • publish the data that are retrieved from other applications. • define the remaining settings for océ account console. • set the regional settings -application language -units of measure (...
Page 344
Enable account management in océ express webtools introduction to enable account management, you can define the values in océ express webtools definition the account information requirements are defined and managed by the administrator. How to define the 'logging and accounting' settings open the 'p...
Page 345
Description value setting enter a value between 1 and 99 days. Nu- meric value 'number of days to keep log files' accounting data missing if the required accounting data is missing, the icon is displayed in front of the job in the ' smart inbox '. To enter the missing accounting data, select the job...
Page 346: Accounting Workflow
Accounting workflow introduction after the administrator configures the settings, accounting can be integrated in the workflow. Workflow 1. Define an accounting dialog and publish it. 2. Add the océ plotwave 340/360 to the devices in océ account console and configure the tasks. Note: try to retrieve...
Page 347
Chapter 8 support operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 348: 'Counter History'
'counter history' introduction navigate to the 'support' - 'counter history' tab to get an overview of the consumables used per printed job. The table below gives an overview of the various functionalities you can access in the 'counter history' to sort, group, save or print the information you need...
Page 349
Description functionali- ty select 'view total info' in the upper right-hand corner of the counter history list if you want to have a complete overview of job counter in- formation. 'view total info' click on a group name to display counter information for all jobs in the group. Click on a job name ...
Page 350: View Events
View events introduction feedback on errors related to print jobs is displayed in the event list. You can open the event list by clicking on 'view events' in the 'jobs' tab in océ express webtools. In ad- dition to this, you can make additional settings to receive more feedback. Additional settings ...
Page 351: Event Messages
Event messages introduction you can open the event list when you click 'view events' in the 'jobs' tab. Overview event messages # troubleshoot event message • check the structure and keywords of the océ job ticket. • when the user panel displays the message 'print job memory full.', delete some jobs...
Page 352
Troubleshoot event message the postscript or pdf file causes an internal printer error. • try to print it from an application using the océ windows ® printer driver. • if the error persists, contact océ service. 'ps/pdf limitation, one or more pages not correctly printed' the postscript or pdf file ...
Page 353
Troubleshoot event message the job has been deleted from the print queue because the time-out of the media request expired and the 'action after media request time-out' is set to 'delete the job' • reprint the job from the submission applica- tion or from the smart inbox. 'job was deleted from the q...
Page 354
Troubleshoot event message the print job contains a non-supported structure of embedded océ job tickets. The settings you have selected in the submission application are not used. Instead, the océ job ticket settings embed- ded in the file are used for printing and identifica- tion of the job. The j...
Page 355: Remote Service
Remote service introduction océ express webtools offers remote services from the printer to océ or from océ to the printer. You can edit these settings in the 'support' - 'remote service' tab in the océ express webtools. 'remote service' has the following options: • 'configure proxy': configure a se...
Page 356
2. A message displays the answer within 30 seconds. When configured correctly, the message 'the system is connected to océ remote service' is displayed. 3. Now the system is able to send data to océ. For example, océ meter manager or océ 'remote service' information. Note: for online viewing, approv...
Page 357
You can save the zip file locally. Chapter 8 - support 357 remote service operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 358: Solve Problems
Solve problems how to solve problems with jobs 1. If there is a problem with a job, the green 'jobs - queue' bar in océ express webtools turns red. The system monitor section of océ express webtools displays the message: 'user inter- vention required'. The job that has the problem remains in the que...
Page 359
Clear an original jam in the scanner introduction when an original jam occurs in the scanner, the message 'scanner original jam' appears on the user panel. You must remove the original from the scanner. Follow the steps in the wizard on the user panel to clear the jam. If an original jam occurs ofte...
Page 360
4. Smooth out the original and feed the original. Chapter 8 - support 360 clear an original jam in the scanner operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 361
Clear a media jam in the heater section attention: during normal use, the fuser has to remain closed. Only open it to remove the media after a media jam. If a media jam occurs in the heater section, follow the help wizard and take the following steps: 1. Wait a few moments to let the heater cool dow...
Page 362
2. Use the media jam clearance handle to open the upper back cover. 3. Remove any jammed printing material from the fuser section. 4. Press the green knob on the media jam clearance handle and close the upper back cover. Note: make sure you close the upper back cover properly: make sure you hear a c...
Page 363
Clear a media jam in the media bypass section if a media jam occurs in the media bypass section, follow the help wizard on the user panel and take the following steps: 1. Open the lower front cover. Chapter 8 - support 363 clear a media jam in the media bypass section operating information: plotwave...
Page 364
2. Lower the media bypass by pressing the handles on the left and the right. 3. Remove any jammed media. Chapter 8 - support 364 clear a media jam in the media bypass section operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 365
Note: if the material cannot be removed easily, open the upper back cover with the media jam clearance handle to access to the jammed material. For more information, see ‘clear a media jam in the heater section’ on page 361 ). 4. Pull up the media bypass. 5. Close the lower front cover. Chapter 8 - ...
Page 366
Clear a media jam in the roll feed section if a media jam occurs in the roll feed section, follow the help wizard on the user panel and take the following steps: 1. Firmly pull the media drawer to open it. 2. Remove any jammed printing material from the paper path and, if necessary, pull back the me...
Page 367: Print A Demo Print
Print a demo print when to do you can print a demo print to check whether the printer is working correctly. How to print a demo print on the multi-touch user panel: 1. Tap the 'system' thumbnail. A window opens. 2. In the 'setup' list in the bottom right corner of the display, select 'test prints'. ...
Page 368: Print A Test Print
Print a test print when to do print a test print from roll 1 or 2 at the request of the océ helpdesk. The test print pro- vides information that can help to solve quality problems. How to print a test print on the multi-touch user panel: 1. Tap the 'system' thumbnail. A window opens. 2. In the 'setu...
Page 369
Print the print density chart when to do to influence the toner usage of your printer, you can print the print density chart and adjust the print density offset. A negative value reduces the toner usage, a positive value increases the toner usage. Print the print density chart on the multi-touch use...
Page 370
Chapter 8 - support 370 print the print density chart operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 371
Chapter 9 contact operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 372
Online support for your product introduction océ offers comprehensive support for your product on the website: http://global.Oce.Com/ here you can find the latest information that can help you to take full benefit of your product. You can also find answers to your questions. Please visit the website...
Page 373: Reader'S Comment Sheet
Reader's comment sheet questions have you found this manual to be accurate? O yes o no were you able to operate the product, after reading this manual? O yes o no does this manual provide sufficient background information? O yes o no is the format of this manual convenient in size, readability and a...
Page 374
---------------------------------------------------------------------------------------------------------- ---------------------- date: this reader's comment sheet is completed by: (if you prefer to remain unknown, please do fill in your occupation) name: occupation: company: phone: address: city: c...
Page 375
Index a access control enable ................................................. 130–131 account management océ express webtools ................................. 344 action after media request time-out action after media request time-out ............. 166 active job description ........................
Page 376
Basic settings ................................................ 100 color highlighting description .................................................... 271 color mode black and white ............................................ 276 color ............................................................. ...
Page 377
Description .................................................... 246 delivery delivery .......................................................... 33 delivery destination basic settings ................................................ 100 demo print print ................................................
Page 378
G general copy job settings description .................................................... 104 general scan job settings description .................................................... 105 green button description ............................................... 31, 43 smart access ..................
Page 379
Layout settings layout settings ............................................. 102 leading strip leading strip ................................................ 240 licenses activation ...................................................... 330 install .....................................................
Page 380
Minimum browser security settings for océ express webtools for firefox ....................................................... 75 for internet explorer ....................................... 75 mirror description .................................................... 221 layout settings ................
Page 381
Originals exit description ...................................................... 35 output output ........................................................... 33 overview consumables ................................................... 40 copy job settings ........................................... ...
Page 382
Description ...................................................... 43 printer components (back) ......................................... 29 components (front) ......................................... 26 components (left side) ..................................... 28 working area .....................
Page 383
Default ................................................... 65, 254 scan to external location ............................... 261 scan to smart inbox and collect your file ...... 263 scan to usb .................................................. 260 scan job defaults description .......................
Page 384
Solve media jam in the fuser section ........................................ 361 in the media bypass section ........................... 363 in the roll feed section .................................. 366 solve problems with jobs ...................................................... 358 specific a...
Page 385
Usb external location ........................................... 153 scan to usb .................................................. 260 usb mass storage device print ............................................................. 216 usb port description .................................................
Page 386
+2 operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 387
+2 operating information: plotwave (pw) 340, pw350 - edition 2013-06.
Page 388
- beyond the ordinary o printing for professionals creating global leadership in printing canon and océ have joined forces to create the global leader in the printing industry. Our customers can choose from one of the industry's broadest range of products backed by best-in-class service and support ...