Summary of OCB-GT-03i
Page 1
- 2 - user’ s manual ocb-gt-03i gps personal tracker v6.3.
Page 2
- 3 - contents 1 product overview ......................................................................................................................................................................................- 3 - 2 for your safety................................................................
Page 3
- 4 - 1 product overview the ocb-gt-03i is a gps/gprs based personal tracking device, which is compact and easy to use. Ocb-gt-03i has inbuilt gps module to obtain accurate position data and utilizes its gsm capability to send the position data to a specified mobile phone or server base to allow use...
Page 4
- 5 - switch off in aircraft follow any restrictions. Wireless dezvices can cause interference in aircraft. Switch off when refueling do not use ocb-gt-03i when at a refueling point. Do not use near fuels or chemicals. Switch off near blasting follow any restrictions. Do not use ocb-gt-03i when blas...
Page 5
- 6 - 4 getting started this section will describe how to set up your ocb-gt-03i. 4.1 hardware and accessories ocb-gt-03i is supplied in a box which includes: ocb-gt-03i with battery earphone with mic wall charger car charger usb data cable cd 4.2 view front view side view back view 4.3 functional p...
Page 6
- 7 - red led - indicating battery status off power is off or charging is complete flashing (every 0.1 second) low battery on charging flashing (1 second on and 2 seconds off) working blue led - indicating gps status on one button is being pressed flashing ( every 0.1 second) the unit is being initi...
Page 7
- 8 - earphone plug for connecting earphone lanyard loop for connecting lanyard. 4.4 first use please read this manual before using your ocb-gt-03i. 4.4.1 ensure that your ocb-gt-03i has a working sim installed. - check that the sim has not run out of credit (test the sim in a phone to make sure it ...
Page 8
- 9 - 6. Time zone command: w******,032,t description: correct time into your local time note: 1. Default time of the tracker is gmt 2. This correction is applied to location reports by sms and sms alarms. T=0, to turn off this function. T=[-32768,32767] to set time difference in minute to gmt. For ...
Page 9
- 10 - 7.2 track by calling make a missed call to the tracker and it will report its longitude and latitude by sms with format as follows:- latitude = 22 32 36.63n longitude = 114 04 57.37e, speed = 2.6854km/h, 2008-12-24,01:50 7.3 track by preset interval command: w******,002,xxx description: set a...
Page 10
- 11 - 7.4 google earth and google map download google earth from http://earth.Google.Com/. Start google earth (for more information about google earth please refer to http://earth.Google.Com/) or go to http://maps.Google.Com in your internet explorer input the latitude and longitude that you receiv...
Page 11
- 12 - 7.6 track by gprs (meiligao protocol) between server and tracker 7.6.1 set tracker’s gprs id command: w******,010,id description: set a digital gprs id for the tracker. Note: gprs id must not over 14 digits. Example: w000000,010,00001 7.6.2 set apn command: w******,011,apn,username,password d...
Page 12
- 13 - x=2, to enable gprs tracking via udp example: w000000,013,1 7.6.6 set gprs interval command: w******,014,xxxxx description: set time interval for sending gprs packets. Note: xxxxx should be in five digits and in unit of 10 seconds. Xxxxx=00000, to turn off this function; xxxxx=00001~65535, ti...
Page 13
- 14 - 9. Call function you can use the earphone for conversation purpose. 9.1 receiving phone call use your phone or mobile phone to call the tracker, the green led will be on. Press sos button to receive the incoming call or press call b button to reject the call. 9.2 making phone call after you h...
Page 14
- 15 - 12. Movement/geo-fence 12.1 movement alarm command: w******,006,xx description: when the tracker moves out of a preset square scope, it will send an sms alarm to the authorized phone number for sos. Note: xx is the preset distance to the tracker’s original place =00, to turn off this function...
Page 15
- 16 - 13. Heartbeat command: w******,015,data description: set an interval for heartbeat. Note: data is the interval in unit of minute data=0, to turn off this function; data=1~65535, set interval for heartbeat. Example: w000000,015,10 in this example, the tracker will send heartbeat every 10 minut...
Page 16
- 17 - 15. Power down command: w******,026,xx description: make the tracker into power down mode when it is inactive or immobile for a period of time. In power down states, gps stops working and gsm enters sleep and stop sending out message until it is activated by message, incoming calls or movemen...
Page 17
- 18 - description sms command example track on demand w******,000 w000000,000 remarks: to get the current location of the tracker, send this sms or make a telephone call directly to the tracker and it will report its longitude and latitude by sms with format as follows:- latitude = 22 32 36.63n lon...
Page 18
- 19 - track by interval w******,002,xxx w000000,002,030 remarks: to set interval for automatic timed report. Xxx is the interval in minute. If xxx=000 to turn off tracking by time. In this example, the tracker will send location data back to your mobile phone every 30 minutes. Authorization w******...
Page 19
- 20 - w******,117,x 34,e,2333.5678,n w000000,117,11404.0000,e,2232.0010,n,11505.12 34,e,2333.5678,n remarks: 017 is for alarm when tracker moves out the preset scope; 117 is for alarm when tracker moves in. When the tracker moves in or out, it will send an sms alarm to the authorized phone number f...
Page 20
- 21 - gprs id must not over 14 digits. Set apn w******,011,apn,username, password w000000,011,cmnet,meiligao,6688 w000000,011,cmnet remarks: if no apn username and password are required, just input apn only; apn defaulted as ‘cmnet’; apn + username + password should not over 39 characters. Set ip a...
Page 21
- 22 - for more information regarding gprs tracking please refer to sleep mode w******,021,xx### w000000,021,02### remarks: this setting is for power saving. Xx=00 turn off sleep mode xx=01 level i xx=02 level ii ### is the ending character here is some explanation for the sleep mode. First, assume ...
Page 22
- 23 - p=1, sos button/input1 p=2, b button/input2 p=3, c button/input3 char is the character in sos message and max 32 characters and defaulted as: 1 sos alarm! 2 cry for help! 3 call the police! Set prefix (country code) w******,502,*data# w000000,502,*+86# remarks: be advised caution in this sett...
Page 23
- 24 - seconds off) gsm network is slow some gsm networks slow down during peak time or when they have equipment problems. Unit is sleeping or in power down mode cancel sleeping mode or power down wrong password in your sms or wrong sms format write correct password or sms format the sim in ocb-gt-0...