1. DL manuals
  2. Oce
  3. Copier
  4. cm2510
  5. Safety Manual

Oce cm2510 Safety Manual

Summary of cm2510

  • Page 1

    Cm2510_4010_us_saf.Fm -1 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 2

    Notice for users in u.S.A. Note: this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commerci...

  • Page 3

    1 contents cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 laser information . . . . . . . . . . . . . . . . . . . . . . . . . . 3 installation requirements . . . . . . . . . . . . . 4 supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 storage of s...

  • Page 4: Cautions

    2 cautions 1. Do not touch the transfer belt. Scratches or smudges on the transfer belt will cause dirty prints. 2. The fusing unit is extremely hot. Exercise care in this area. 3. Do not look directly at the light source. Doing so may damage your eyes. 4. Four adjusters are provided on all optional...

  • Page 5

    3 cautions laser information wave length 785 nm +10 nm -15 nm pulse times north america: 23 cpm model: (5.1 µs ±5.1 ns)/7 mm 27 cpm model: (5.1 µs ±5.1 ns)/7 mm 35 cpm model: (3.8 µs ±3.8 ns)/7 mm 45 cpm model (color): (3.8 µs ±3.8 ns)/7 mm 45 cpm model (b/w): (2.8 µs ±2.8 ns)/7 mm output power max ...

  • Page 6: Installation Requirements

    4 installation requirements improper installation may damage this product. Please note the following during initial installation and whenever the machine is moved. 1. The machine should be installed near an accessible power outlet for easy connection. 2. Be sure to connect the power cord only to a p...

  • Page 7: Supplies

    5 supplies standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only océ-specified products for the toner cartridges, finisher staple cartridge, saddle stitch finisher staple cartridge, and transparen...

  • Page 8: Specifications

    6 specifications machine specifications / copier specifications * first copy out time is measured with original on the document glass in full ready condition with fuser at operating temperature and mirror motor at operating speed, actual time may vary based on environment conditions. Name digital fu...

  • Page 9

    7 specifications machine specifications / copier specifications (continued) bypass tray paper sizes: 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"r, 7-1/4" x 10-1/2"r, 5-1/2" x 8-1/2"r, a3w, a3, b4, a4, a4r, b5, b5r, a5r, 8k, 16k, 16kr paper weights: thin paper (15 lbs...

  • Page 10

    8 specifications continuous copying speeds* 1 *1 copy speed during output of the second copy and following copies when performing continuous one-sided copying of the same page (excluding offset output). *2 using plain paper from any tray other than the bypass tray. *3 when heavy paper is loaded in t...

  • Page 11

    9 specifications acoustic noise emission (measurement according to iso7779) emission concentration (measurement according to ral-uz62: edition jan. 2002) automatic document feeder specifications * paper weights from 9 lbs. (35 g/m 2 ) to 13 lbs. (49 g/m 2 ) require the use of slow scan mode. Exit tr...

  • Page 12

    10 specifications stand/1x500 sheet paper drawer specifications stand/2x500 sheet paper drawer specifications model 9501 (cm2510) 9509 (cm4010) paper sizes 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"r, 7-1/4" x 10-1/2"r, a3, b4, a4, a4r, b5, b5r, 8k, 16k, 16kr paper weight plai...

  • Page 13

    11 specifications large capacity tray specifications* * stand/1x500 sheet paper drawer (9501/9509) or stand/2x500 sheet paper drawer (9502/9511) is required. Model 9503 paper sizes 8-1/2" x 11", a4 (paper size change must be performed by a service technician) paper weight plain paper (16 lbs. To 28 ...

  • Page 14

    12 specifications finisher specifications *1 the maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *2 the maximum number of sheets for stapling assumes a paper weight of 24 lbs. (...

  • Page 15

    13 specifications saddle stitch finisher specifications* 1 *1 paper pass unit (9506) and stand/1x500 sheet paper drawer (9501/9509) or stand/2x500 sheet paper drawer (9502/9511) are required. *2 the maximum number of sheets that can be held varies depending on ambient conditions in the installation ...

  • Page 16

    14 specifications punch module specifications (for finisher) punch module specifications (for saddle stitch finisher) model 9507 hole punching 2 holes or 3 holes allowed paper sizes for punching 2 holes: 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"r 3 holes: 11" x 17", 8-1/2" x 11", a3, a4 punchable pap...

  • Page 17

    15 specifications printer specifications *1 when the ps3 expansion kit (cm2510020) is installed and the machine is used as a postscript printer. *2 barcode font kit (zb3500160) is required. Type built-in continuous printing speed same as continuous copying speed (when printing same document continuo...

  • Page 18

    16 specifications network scanner / internet fax* 1 specifications *1 internet fax expansion kit (cm2510040) is required. *2 total number of all destinations (scan to e-mail, scan to ftp, scan to desktop, scan to network folder, internet fax, fax, and group) pull scan function (twain) specifications...

  • Page 19

    17 specifications optional equipment yes:can be installed. Cm2510 cm4010 automatic docment feeder standard exit tray unit yes stand/1x500 sheet paper drawer yes stand/2x500 sheet paper drawer yes large capacity tray yes finisher yes saddle stitch finisher yes punch module yes printer function standa...

  • Page 20

    18 cm2510_4010_us_saf.Fm 18 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 21

    19 information that the administrator of the machine requires is printed on the back of this page. (separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator's contact information in the left hand margin.) administr ator ...

  • Page 22: To The Administrator of The

    20 to the administrator of the machine (separate this page from the manual and keep it in a safe place.) factory default passwords when accessing the system settings, the administrator password is required to log in with administrator rights. The system settings can be configured in the web pages as...

  • Page 23

    21 to the administrator of the machine trademark acknowledgments the following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • microsoft ® , windows ® , windows ® 98, windows ® me, windows nt ® 4.0, windows ® 2000, windows ®...

  • Page 24

    Cm2510_4010_us_saf.Fm 22 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 25

    Cm2510_4010_us_saf.Fm 23 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 26

    Cm2510_4010_us_saf.Fm 24 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 27

    Cm2510_4010_us_saf.Fm 25 ページ ２００６年１１月２７日 月曜日 午後３時１８分.

  • Page 28

    2007a ks1 tinse3734fczz this manual has been printed using a vegetable-based soy oil ink to help protect the environment. Printed on 100% post-consumer recycled paper the information contained in this manual is subject to change without notice to incorporate improvements made to the prod- ucts liste...