Oce im2330 Scanning Manual - page 125

Scanning Remotely Using Remote Scan Driver    123

— Configuring Discovery Settings

You can configure the discovery settings.

1) Devices

Click the arrow button to display the poll down list and check the model name that you want 

to search.

2) Network - Enable IPX/SPX Search

This is disabled because the Remote Scan driver does not support the IPX/SPX connection.

3) Network - Enable TCP/IP Search

Select this to search for devices connected to the TCP/IP network.  This is available only 

when the TCP/IP protocol is installed.

When this is enabled, select how it searches devices in the TCP/IP network.

- Search local subnet — Select this to search devices in local subnet.

- Specify a range — Select this to search devices in specific range of IP addresses.  

When this is selected, enter the IP addresses in “From” field and “To” field to specify the 

range.

How to Use Remote Scan Driver

In the Remote Scan driver, you can set the various scan settings.

1) Menu Bar

You can select various functions from the menu.

1

2

4

5

3