1. DL manuals
  2. Oce
  3. Cutter
  4. ProCut 1600 M
  5. Manual

Oce ProCut 1600 M Manual - Preface

Manual is about: 1600 Series, 2500 Series, 3200 Series

Summary of ProCut 1600 M

  • Page 1

    Océ procut 1600, 2500, and 3200 series cutters revision e – july 23, 2010

  • Page 2

    Océ procut site prep océ procut site preparation guide - revision: e ii océ display graphics systems © 2010 all rights reserved part number: 3010108370

  • Page 3: Table of Contents

    Océ procut site prep océ procut site preparation guide - revision: e iii table of contents table of figures ...................................................................................................................... Iv preface..................................................................

  • Page 4: List of Tables

    Océ procut site prep océ procut site preparation guide - revision: e iv list of tables table 1: crate dimensions and weight ...................................................................................................4 table 2: cutter extension crate dimensions and weights........................

  • Page 5: Preface

    Océ procut site prep océ procut site preparation guide - revision: e v preface copyright © 2010 océ display graphics systems. All rights reserved. This document contains information proprietary to océ, to its subsidiaries, or to third parties to which océ may have a legal obligation to protect such ...

  • Page 6: Introduction

    Océ procut site prep introduction this document contains information that will be helpful to you in determining the final location for the cutter, transporting the cutter to its final location, and all specifications for power, space, and environmental conditions required for the océ procut manufact...

  • Page 7: System Requirements

    Océ procut site prep system requirements receiving the océ procut packed in its crate, the océ procut can withstand normal vibrations from road or air travel. Severe shock, however, may damage the components within the machine. Document all visible damage to the packaging immediately upon delivery. ...

  • Page 8

    Océ procut site prep océ procut site preparation guide - revision: e 3 crate dimensions and weight 1600 m crate dimensions [mm] in crate [kg] crate 1: basic unit 2260 x 1550 x 940 650 kg crate 2: basic unit 3080 x 1550 x 600 900 kg largest part (unpackaged) 2512 x 300 x 300 100 1600 xl crate dimensi...

  • Page 9

    Océ procut site prep océ procut site preparation guide - revision: e 4 all models crate dimensions [mm] in crate [kg] pallet 1: vacuum generator 1200 x 800 x 970 140 pallet 2: workstation 2684 x 850 x 550 120 table 1: crate dimensions and weight note: models ordered with a vacuum cleaner will ship w...

  • Page 10: Facility Requirements

    Océ procut site prep facility requirements facility requirements determine where the cutter system will be located in advance of the installation. Mark this with adhesive tape so that you can confirm the dimensions. Ensure that there is a gap of at least 1 meter to the nearest wall all around the ma...

  • Page 11

    Océ procut site prep electrical requirements this apparatus is intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant. This apparatus is not intended to be connected to public lo...

  • Page 12

    Océ procut site prep electrical connection – 208 v system with 1-9kw vacuum generator the cutter is connected with one power cord to the power main. The vacuum generator is connected with one power cord to the power main. The cutter and vacuum generator need separate circuit breakers. All other devi...

  • Page 13

    Océ procut site prep electrical connections - 400 v system with 2.2/2.55 kw vacuum pump (1600 m only) comply with national instructions and laws at connection the cutter to the power supply system. The cutter is connected with one power cord to the power supply system. The vacuum pump is connected t...

  • Page 14

    Océ procut site prep océ procut site preparation guide - revision: e 9 ground fault requirements electrical rules and regulations and vary from country to country and sometimes even within a country. A local electrician should be consulted to determine local ground fault requirements. Some countries...

  • Page 15

    Océ procut site prep océ procut site preparation guide - revision: e 10 compressed air: compressed air is not supplied internally with the océ procut cutter. The customer must supply either house compressed air or an external air compressor that meets the following requirements: connector hose inter...

  • Page 16: Installation / Training

    Océ procut site prep installation / training the operator must have some technical skill and knowledge of pc operation. Only specially trained personnel must operate the cutter. Trainees must have prior knowledge of computers and basic mechanical abilities. Trainees must be available during the enti...

  • Page 17: Specifications

    Océ procut site prep océ procut site preparation guide - revision: e 12 specifications machine dimensions and weight: table 12: 1600 series machine dimensions and weight 1600 m dimensions [mm] weight [kg] basic unit (l x b) 2512 x 2055 670 operator console (b1) 300 work station (b2) 624 router optio...

  • Page 18

    Océ procut site prep océ procut site preparation guide - revision: e 13 1600 xxxl dimensions [mm] weight [kg] basic unit (l x b) 2512 x 3935 1120 operator console (b1) 300 work station (b2) 624 60 router option (b3) 330 2500 m dimensions [mm] weight [kg] basic unit (l x b) 3412 x 2055 840 operator c...

  • Page 19

    Océ procut site prep 3200 l dimensions [mm] weight [kg] basic unit (l x b) 4112 x 2525 1110 operator console (b1) 300 work station (b2) 624 60 3200 xl dimensions [mm] weight [kg] basic unit (l x b) 4112 x 2995 1280 operator console (b1) 300 work station (b2) 624 60 3200 xxl dimensions [mm] weight [k...

  • Page 20

    Océ procut site prep cutter extension dimensions and weights: cutter extension ce2500 t1 [mm] t2 [mm] weight [kg] 2500 l 2445 1989 140 2500 m 2445 1519 105 cutter extension ce3200 t1 [mm] t2 [mm] weight [kg] 3200 l 3145 1989 170 3200 xl 3145 2459 180 3200 2xl 3145 2929 230 3200 3xl 3145 3399 260 tab...

  • Page 21

    Océ procut site prep océ procut site preparation guide - revision: e 16 environment temperature/humidity values operating temperature 10 °c to 35 °c (50° to 90° f) storage temperature -20º to 55º c (-4° to 126° f) relative humidity 10 % to 80 % non-condensing table 17: environment note: temperature ...

  • Page 22

    Océ procut site prep océ procut site preparation guide - revision: e 17 océ procut windows server & onyx rip it is recommended that the océ procut windows server and onyx rip run on the same computer. Running the two applications on the same computer will provide the fastest file handling since all ...

  • Page 23: Check List

    Océ procut site prep check list in order to avoid complications and misunderstandings, please use this list for your preparation activities: the delivery truck can reach the unloading location without obstruction. A suitable forklift is available for installation. Additional labor is available (if n...